Merge tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux into next/cleanup

This cleanup series gets rid of <mach/timex.h> for platforms not using
ARCH_MULTIPLATFORM. (For multi-platform code it's already unused since
387798b (ARM: initial multiplatform support).)

To make this work some code out of arch/arm needed to be adapted. The
respective changes got acks by their maintainers to be taken via armsoc
(with Andrew Morton substituting for Alessandro Zummo as rtc maintainer).

Compared to the previous pull request there was another patch added that
fixes a (non-critical) regression on ixp4xx. Olof Johansson asked to not
squash this fix into the original commit to save him from the need to
reverify the series.

* tag 'dropmachtimexh-v2' of git://git.pengutronix.de/git/ukl/linux:
  ARM: ixp4xx: fix timer latch calculation
  ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
  ARM: rpc: stop using <mach/timex.h>
  ARM: ixp4xx: stop using <mach/timex.h>
  input: ixp4xx-beeper: don't use symbols from <mach/timex.h>
  ARM: at91: don't use <mach/timex.h>
  ARM: ep93xx: stop using mach/timex.h
  ARM: mmp: stop using mach/timex.h
  ARM: netx: stop using mach/timex.h
  ARM: sa1100: stop using mach/timex.h
  clocksource: sirf/marco+prima2: drop usage of CLOCK_TICK_RATE
  rtc: pxa: drop unused #define TIMER_FREQ
  rtc: at91sam9: include <mach/hardware.h> explicitly
  ARM/serial: at91: switch atmel serial to use gpiolib

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 17 insertions, 12 deletions

diff --git a/drivers/clocksource/timer-marco.c b/drivers/clocksource/timer-marco.c
index 09a17d9a659..b52e1c078b9 100644
--- a/drivers/clocksource/timer-marco.c
+++ b/drivers/clocksource/timer-marco.c
@@ -19,7 +19,8 @@
 #include <linux/of_irq.h>
 #include <linux/of_address.h>
 #include <linux/sched_clock.h>
-#include <asm/mach/time.h>
+
+#define MARCO_CLOCK_FREQ 1000000
 
 #define SIRFSOC_TIMER_32COUNTER_0_CTRL			0x0000
 #define SIRFSOC_TIMER_32COUNTER_1_CTRL			0x0004
@@ -191,7 +192,7 @@ static int sirfsoc_local_timer_setup(struct clock_event_device *ce)
 	ce->rating = 200;
 	ce->set_mode = sirfsoc_timer_set_mode;
 	ce->set_next_event = sirfsoc_timer_set_next_event;
-	clockevents_calc_mult_shift(ce, CLOCK_TICK_RATE, 60);
+	clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60);
 	ce->max_delta_ns = clockevent_delta2ns(-2, ce);
 	ce->min_delta_ns = clockevent_delta2ns(2, ce);
 	ce->cpumask = cpumask_of(cpu);
@@ -263,11 +264,11 @@ static void __init sirfsoc_marco_timer_init(void)
 	BUG_ON(IS_ERR(clk));
 	rate = clk_get_rate(clk);
 
-	BUG_ON(rate < CLOCK_TICK_RATE);
-	BUG_ON(rate % CLOCK_TICK_RATE);
+	BUG_ON(rate < MARCO_CLOCK_FREQ);
+	BUG_ON(rate % MARCO_CLOCK_FREQ);
 
 	/* Initialize the timer dividers */
-	timer_div = rate / CLOCK_TICK_RATE - 1;
+	timer_div = rate / MARCO_CLOCK_FREQ - 1;
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
 	writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
@@ -283,7 +284,7 @@ static void __init sirfsoc_marco_timer_init(void)
 	/* Clear all interrupts */
 	writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
 
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ));
 
 	sirfsoc_clockevent_init();
 }
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index 8a492d34ff9..1a6b2d6356d 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -21,6 +21,8 @@
 #include <linux/sched_clock.h>
 #include <asm/mach/time.h>
 
+#define PRIMA2_CLOCK_FREQ 1000000
+
 #define SIRFSOC_TIMER_COUNTER_LO	0x0000
 #define SIRFSOC_TIMER_COUNTER_HI	0x0004
 #define SIRFSOC_TIMER_MATCH_0		0x0008
@@ -173,7 +175,7 @@ static u64 notrace sirfsoc_read_sched_clock(void)
 static void __init sirfsoc_clockevent_init(void)
 {
 	sirfsoc_clockevent.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE,
+	clockevents_config_and_register(&sirfsoc_clockevent, PRIMA2_CLOCK_FREQ,
 					2, -2);
 }
 
@@ -190,8 +192,8 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	rate = clk_get_rate(clk);
 
-	BUG_ON(rate < CLOCK_TICK_RATE);
-	BUG_ON(rate % CLOCK_TICK_RATE);
+	BUG_ON(rate < PRIMA2_CLOCK_FREQ);
+	BUG_ON(rate % PRIMA2_CLOCK_FREQ);
 
 	sirfsoc_timer_base = of_iomap(np, 0);
 	if (!sirfsoc_timer_base)
@@ -199,14 +201,16 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
 
-	writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
+	writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
+		       sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
 	writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS);
 
-	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
+	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource,
+				       PRIMA2_CLOCK_FREQ));
 
-	sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
+	sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
 
 	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));