Linux 3.4.25v3.4.25

author: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-01-11 09:09:13 -0800
committer: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2013-01-11 09:09:13 -0800
commit: 0ba1cd8da86b7c4717852e786bacc7154b62d95c (patch)
tree: f2c526a92ee9f714bff05b076503a6a8bffa8a83 /drivers/block
parent: 4ca05c86fde5ea8fd6b1929cb0e14b7993de9ba1 (diff)
0 files changed, 0 insertions, 0 deletions
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
index f3f37f141db..affb15a344a 100644
--- a/Documentation/DocBook/mac80211.tmpl
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -144,7 +144,7 @@ usage should require reading the full document.
         this though and the recommendation to allow only a single
         interface in STA mode at first!
       </para>
-!Finclude/net/mac80211.h ieee80211_if_init_conf
+!Finclude/net/mac80211.h ieee80211_vif
     </chapter>
 
     <chapter id="rx-tx">
@@ -234,7 +234,6 @@ usage should require reading the full document.
       <title>Multiple queues and QoS support</title>
       <para>TBD</para>
 !Finclude/net/mac80211.h ieee80211_tx_queue_params
-!Finclude/net/mac80211.h ieee80211_tx_queue_stats
     </chapter>
 
     <chapter id="AP">
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 732b1fa48cf..73ef30dbe61 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -84,27 +84,6 @@ Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
 
 ---------------------------
 
-What:	CONFIG_WIRELESS_OLD_REGULATORY - old static regulatory information
-When:	March 2010 / desktop catchup
-
-Why:	The old regulatory infrastructure has been replaced with a new one
-	which does not require statically defined regulatory domains. We do
-	not want to keep static regulatory domains in the kernel due to the
-	the dynamic nature of regulatory law and localization. We kept around
-	the old static definitions for the regulatory domains of:
-
-		* US
-		* JP
-		* EU
-
-	and used by default the US when CONFIG_WIRELESS_OLD_REGULATORY was
-	set. We will remove this option once the standard Linux desktop catches
-	up with the new userspace APIs we have implemented.
-
-Who:	Luis R. Rodriguez <lrodriguez@atheros.com>
-
----------------------------
-
 What:	dev->power.power_state
 When:	July 2007
 Why:	Broken design for runtime control over driver power states, confusing
@@ -561,3 +540,13 @@ Why:	The corgi touchscreen is now deprecated in favour of the generic
 	ads7846 driver now. Provided that the original driver is not generic
 	and is difficult to maintain, it will be removed later.
 Who:	Eric Miao <eric.y.miao@gmail.com>
+
+----------------------------
+
+What:	capifs
+When:	February 2011
+Files:	drivers/isdn/capi/capifs.*
+Why:	udev fully replaces this special file system that only contains CAPI
+	NCCI TTY device nodes. User space (pppdcapiplugin) works without
+	noticing the difference.
+Who:	Jan Kiszka <jan.kiszka@web.de>
diff --git a/Documentation/isdn/INTERFACE.CAPI b/Documentation/isdn/INTERFACE.CAPI
index 5fe8de5cc72..f172091fb7c 100644
--- a/Documentation/isdn/INTERFACE.CAPI
+++ b/Documentation/isdn/INTERFACE.CAPI
@@ -149,10 +149,11 @@ char *(*procinfo)(struct capi_ctr *ctrlr)
 	pointer to a callback function returning the entry for the device in
 	the CAPI controller info table, /proc/capi/controller
 
-read_proc_t *ctr_read_proc
-	pointer to the read_proc callback function for the device's proc file
-	system entry, /proc/capi/controllers/<n>; will be called with a
-	pointer to the device's capi_ctr structure as the last (data) argument
+const struct file_operations *proc_fops
+	pointers to callback functions for the device's proc file
+	system entry, /proc/capi/controllers/<n>; pointer to the device's
+	capi_ctr structure is available from struct proc_dir_entry::data
+	which is available from struct inode.
 
 Note: Callback functions except send_message() are never called in interrupt
 context.
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index 794941fc949..e472df84232 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -292,10 +292,10 @@ GigaSet 307x Device Driver
         to /etc/modprobe.d/gigaset, /etc/modprobe.conf.local or a similar file.
 
      Problem:
-        Your isdn script aborts with a message about isdnlog.
+        The isdnlog program emits error messages or just doesn't work.
      Solution:
-        Try deactivating (or commenting out) isdnlog. This driver does not
-        support it.
+        Isdnlog supports only the HiSax driver. Do not attempt to use it with
+	other drivers such as Gigaset.
 
      Problem:
         You have two or more DECT data adapters (M101/M105) and only the
@@ -321,8 +321,8 @@ GigaSet 307x Device Driver
      writing an appropriate value to /sys/module/gigaset/parameters/debug, e.g.
         echo 0 > /sys/module/gigaset/parameters/debug
      switches off debugging output completely,
-        echo 0x10a020 > /sys/module/gigaset/parameters/debug
-     enables the standard set of debugging output messages. These values are
+        echo 0x302020 > /sys/module/gigaset/parameters/debug
+     enables a reasonable set of debugging output messages. These values are
      bit patterns where every bit controls a certain type of debugging output.
      See the constants DEBUG_* in the source file gigaset.h for details.
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 8c666d80f0e..fbcddc5abe2 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -54,6 +54,7 @@ parameter is applicable:
 	IMA     Integrity measurement architecture is enabled.
 	IOSCHED	More than one I/O scheduler is enabled.
 	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
+	IPV6	IPv6 support is enabled.
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
@@ -356,6 +357,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
 
+	autoconf=	[IPV6]
+			See Documentation/networking/ipv6.txt.
+
 	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
 			Limit apic dumping. The parameter defines the maximal
 			number of local apics being dumped. Also it is possible
@@ -638,6 +642,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			See drivers/char/README.epca and
 			Documentation/serial/digiepca.txt.
 
+	disable=	[IPV6]
+			See Documentation/networking/ipv6.txt.
+
+	disable_ipv6=	[IPV6]
+			See Documentation/networking/ipv6.txt.
+
 	disable_mtrr_cleanup [X86]
 			The kernel tries to adjust MTRR layout from continuous
 			to discrete, to make X server driver able to add WB
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index b132e4a3cf0..a62fdf7a6bf 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -58,8 +58,10 @@ DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
 size (application payload size) in bytes, see RFC 4340, section 14.
 
 DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs
-supported by the endpoint (see include/linux/dccp.h for symbolic constants).
-The caller needs to provide a sufficiently large (> 2) array of type uint8_t.
+supported by the endpoint. The option value is an array of type uint8_t whose
+size is passed as option length. The minimum array size is 4 elements, the
+value returned in the optlen argument always reflects the true number of
+built-in CCIDs.
 
 DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same
 time, combining the operation of the next two socket options. This option is
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index e87f3cdc8a6..8b72c88ba21 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -487,6 +487,30 @@ tcp_dma_copybreak - INTEGER
 	and CONFIG_NET_DMA is enabled.
 	Default: 4096
 
+tcp_thin_linear_timeouts - BOOLEAN
+	Enable dynamic triggering of linear timeouts for thin streams.
+	If set, a check is performed upon retransmission by timeout to
+	determine if the stream is thin (less than 4 packets in flight).
+	As long as the stream is found to be thin, up to 6 linear
+	timeouts may be performed before exponential backoff mode is
+	initiated. This improves retransmission latency for
+	non-aggressive thin streams, often found to be time-dependent.
+	For more information on thin streams, see
+	Documentation/networking/tcp-thin.txt
+	Default: 0
+
+tcp_thin_dupack - BOOLEAN
+	Enable dynamic triggering of retransmissions after one dupACK
+	for thin streams. If set, a check is performed upon reception
+	of a dupACK to determine if the stream is thin (less than 4
+	packets in flight). As long as the stream is found to be thin,
+	data is retransmitted on the first received dupACK. This
+	improves retransmission latency for non-aggressive thin
+	streams, often found to be time-dependent.
+	For more information on thin streams, see
+	Documentation/networking/tcp-thin.txt
+	Default: 0
+
 UDP variables:
 
 udp_mem - vector of 3 INTEGERs: min, pressure, max
@@ -692,6 +716,25 @@ proxy_arp - BOOLEAN
 	conf/{all,interface}/proxy_arp is set to TRUE,
 	it will be disabled otherwise
 
+proxy_arp_pvlan - BOOLEAN
+	Private VLAN proxy arp.
+	Basically allow proxy arp replies back to the same interface
+	(from which the ARP request/solicitation was received).
+
+	This is done to support (ethernet) switch features, like RFC
+	3069, where the individual ports are NOT allowed to
+	communicate with each other, but they are allowed to talk to
+	the upstream router.  As described in RFC 3069, it is possible
+	to allow these hosts to communicate through the upstream
+	router by proxy_arp'ing. Don't need to be used together with
+	proxy_arp.
+
+	This technology is known by different names:
+	  In RFC 3069 it is called VLAN Aggregation.
+	  Cisco and Allied Telesyn call it Private VLAN.
+	  Hewlett-Packard call it Source-Port filtering or port-isolation.
+	  Ericsson call it MAC-Forced Forwarding (RFC Draft).
+
 shared_media - BOOLEAN
 	Send(router) or accept(host) RFC1620 shared media redirects.
 	Overrides ip_secure_redirects.
@@ -833,9 +876,18 @@ arp_notify - BOOLEAN
 	    or hardware address changes.
 
 arp_accept - BOOLEAN
-	Define behavior when gratuitous arp replies are received:
-	0 - drop gratuitous arp frames
-	1 - accept gratuitous arp frames
+	Define behavior for gratuitous ARP frames who's IP is not
+	already present in the ARP table:
+	0 - don't create new entries in the ARP table
+	1 - create new entries in the ARP table
+
+	Both replies and requests type gratuitous arp will trigger the
+	ARP table to be updated, if this setting is on.
+
+	If the ARP table already contains the IP address of the
+	gratuitous arp frame, the arp table will be updated regardless
+	if this setting is on or off.
+
 
 app_solicit - INTEGER
 	The maximum number of probes to send to the user space ARP daemon
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
new file mode 100755
index 00000000000..19015de6725
--- /dev/null
+++ b/Documentation/networking/ixgbevf.txt
@@ -0,0 +1,90 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+November 24, 2009
+
+Contents
+========
+
+- In This Release
+- Identifying Your Adapter
+- Known Issues/Troubleshooting
+- Support
+
+In This Release
+===============
+
+This file describes the ixgbevf Linux* Base Driver for Intel Network
+Connection.
+
+The ixgbevf driver supports 82599-based virtual function devices that can only
+be activated on kernels with CONFIG_PCI_IOV enabled.
+
+The ixgbevf driver supports virtual functions generated by the ixgbe driver
+with a max_vfs value of 1 or greater.
+
+The guest OS loading the ixgbevf driver must support MSI-X interrupts.
+
+VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+Identifying Your Adapter
+========================
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+    http://support.intel.com/support/network/sb/CS-008441.htm
+
+Known Issues/Troubleshooting
+============================
+
+  Unloading Physical Function (PF) Driver Causes System Reboots When VM is
+  Running and VF is Loaded on the VM
+  ------------------------------------------------------------------------
+  Do not unload the PF driver (ixgbe) while VFs are assigned to guests.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+    http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+    http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to e1000-devel@lists.sf.net
+
+License
+=======
+
+Intel 10 Gigabit Linux driver.
+Copyright(c) 1999 - 2009 Intel Corporation.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms and conditions of the GNU General Public License,
+version 2, as published by the Free Software Foundation.
+
+This program is distributed in the hope it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+The full GNU General Public License is included in this distribution in
+the file called "COPYING".
+
+Trademarks
+==========
+
+Intel, Itanium, and Pentium are trademarks or registered trademarks of
+Intel Corporation or its subsidiaries in the United States and other
+countries.
+
+* Other names and brands may be claimed as the property of others.
diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt
index a22fd85e379..09ab0d29032 100644
--- a/Documentation/networking/packet_mmap.txt
+++ b/Documentation/networking/packet_mmap.txt
@@ -2,7 +2,7 @@
 + ABSTRACT
 --------------------------------------------------------------------------------
 
-This file documents the CONFIG_PACKET_MMAP option available with the PACKET
+This file documents the mmap() facility available with the PACKET
 socket interface on 2.4 and 2.6 kernels. This type of sockets is used for 
 capture network traffic with utilities like tcpdump or any other that needs
 raw access to network interface.
@@ -44,7 +44,7 @@ enabled. For transmission, check the MTU (Maximum Transmission Unit) used and
 supported by devices of your network.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP to improve capture process
++ How to use mmap() to improve capture process
 --------------------------------------------------------------------------------
 
 From the user standpoint, you should use the higher level libpcap library, which
@@ -64,7 +64,7 @@ the low level details or want to improve libpcap by including PACKET_MMAP
 support.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP directly to improve capture process
++ How to use mmap() directly to improve capture process
 --------------------------------------------------------------------------------
 
 From the system calls stand point, the use of PACKET_MMAP involves
@@ -105,7 +105,7 @@ also the mapping of the circular buffer in the user process and
 the use of this buffer.
 
 --------------------------------------------------------------------------------
-+ How to use CONFIG_PACKET_MMAP directly to improve transmission process
++ How to use mmap() directly to improve transmission process
 --------------------------------------------------------------------------------
 Transmission process is similar to capture as shown below.
 
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index ee31369e9e5..9551622d0a7 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -188,3 +188,27 @@ Then in some part of your code after your wiphy has been registered:
 		       &mydriver_jp_regdom.reg_rules[i],
 		       sizeof(struct ieee80211_reg_rule));
 	regulatory_struct_hint(rd);
+
+Statically compiled regulatory database
+---------------------------------------
+
+In most situations the userland solution using CRDA as described
+above is the preferred solution.  However in some cases a set of
+rules built into the kernel itself may be desirable.  To account
+for this situation, a configuration option has been provided
+(i.e. CONFIG_CFG80211_INTERNAL_REGDB).  With this option enabled,
+the wireless database information contained in net/wireless/db.txt is
+used to generate a data structure encoded in net/wireless/regdb.c.
+That option also enables code in net/wireless/reg.c which queries
+the data in regdb.c as an alternative to using CRDA.
+
+The file net/wireless/db.txt should be kept up-to-date with the db.txt
+file available in the git repository here:
+
+    git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git
+
+Again, most users in most situations should be using the CRDA package
+provided with their distribution, and in most other situations users
+should be building and using CRDA on their own rather than using
+this option.  If you are not absolutely sure that you should be using
+CONFIG_CFG80211_INTERNAL_REGDB then _DO_NOT_USE_IT_.
diff --git a/Documentation/networking/tcp-thin.txt b/Documentation/networking/tcp-thin.txt
new file mode 100644
index 00000000000..151e229980f
--- /dev/null
+++ b/Documentation/networking/tcp-thin.txt
@@ -0,0 +1,47 @@
+Thin-streams and TCP
+====================
+A wide range of Internet-based services that use reliable transport
+protocols display what we call thin-stream properties. This means
+that the application sends data with such a low rate that the
+retransmission mechanisms of the transport protocol are not fully
+effective. In time-dependent scenarios (like online games, control
+systems, stock trading etc.) where the user experience depends
+on the data delivery latency, packet loss can be devastating for
+the service quality. Extreme latencies are caused by TCP's
+dependency on the arrival of new data from the application to trigger
+retransmissions effectively through fast retransmit instead of
+waiting for long timeouts.
+
+After analysing a large number of time-dependent interactive
+applications, we have seen that they often produce thin streams
+and also stay with this traffic pattern throughout its entire
+lifespan. The combination of time-dependency and the fact that the
+streams provoke high latencies when using TCP is unfortunate.
+
+In order to reduce application-layer latency when packets are lost,
+a set of mechanisms has been made, which address these latency issues
+for thin streams. In short, if the kernel detects a thin stream,
+the retransmission mechanisms are modified in the following manner:
+
+1) If the stream is thin, fast retransmit on the first dupACK.
+2) If the stream is thin, do not apply exponential backoff.
+
+These enhancements are applied only if the stream is detected as
+thin. This is accomplished by defining a threshold for the number
+of packets in flight. If there are less than 4 packets in flight,
+fast retransmissions can not be triggered, and the stream is prone
+to experience high retransmission latencies.
+
+Since these mechanisms are targeted at time-dependent applications,
+they must be specifically activated by the application using the
+TCP_THIN_LINEAR_TIMEOUTS and TCP_THIN_DUPACK IOCTLS or the
+tcp_thin_linear_timeouts and tcp_thin_dupack sysctls. Both
+modifications are turned off by default.
+
+References
+==========
+More information on the modifications, as well as a wide range of
+experimental data can be found here:
+"Improving latency for interactive, thin-stream applications over
+reliable transport"
+http://simula.no/research/nd/publications/Simula.nd.477/simula_pdf_file
diff --git a/Documentation/powerpc/dts-bindings/fsl/can.txt b/Documentation/powerpc/dts-bindings/fsl/can.txt
new file mode 100644
index 00000000000..2fa4fcd38fd
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/can.txt
@@ -0,0 +1,53 @@
+CAN Device Tree Bindings
+------------------------
+
+(c) 2006-2009 Secret Lab Technologies Ltd
+Grant Likely <grant.likely@secretlab.ca>
+
+fsl,mpc5200-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				 "ref" for reference clock (XTAL)
+			   "ref" is default in case this property is not
+			   present.
+
+fsl,mpc5121-mscan nodes
+-----------------------
+In addition to the required compatible-, reg- and interrupt-properties, you can
+also specify which clock source and divider shall be used for the controller:
+
+- fsl,mscan-clock-source : a string describing the clock source. Valid values
+			   are:	"ip" for ip bus clock
+				"ref" for reference clock
+				"sys" for system clock
+			   If this property is not present, an optimal CAN
+			   clock source and frequency based on the system
+			   clock will be selected. If this is not possible,
+			   the reference clock will be used.
+
+- fsl,mscan-clock-divider: for the reference and system clock, an additional
+			   clock divider can be specified. By default, a
+			   value of 1 is used.
+
+Note that the MPC5121 Rev. 1 processor is not supported.
+
+Examples:
+	can@1300 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <12 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1300 0x80>;
+	};
+
+	can@1380 {
+		compatible = "fsl,mpc5121-mscan";
+		interrupts = <13 0x8>;
+		interrupt-parent = <&ipic>;
+		reg = <0x1380 0x80>;
+		fsl,mscan-clock-source = "ref";
+		fsl,mscan-clock-divider = <3>;
+	};
diff --git a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
index 5c6602dbfdc..4ccb2cd5df9 100644
--- a/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/mpc5200.txt
@@ -195,11 +195,4 @@ External interrupts:
 
 fsl,mpc5200-mscan nodes
 -----------------------
-In addition to the required compatible-, reg- and interrupt-properites, you can
-also specify which clock source shall be used for the controller:
-
-- fsl,mscan-clock-source- a string describing the clock source. Valid values
-			  are:	"ip" for ip bus clock
-				"ref" for reference clock (XTAL)
-			  "ref" is default in case this property is not
-			  present.
+See file can.txt in this directory.
diff --git a/MAINTAINERS b/MAINTAINERS
index f520dd0862b..34f52a14e05 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2391,6 +2391,12 @@ F:	Documentation/isdn/README.gigaset
 F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
+GRETH 10/100/1G Ethernet MAC device driver
+M:	Kristoffer Glembo <kristoffer@gaisler.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/greth*
+
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
 M:	Frank Seidel <frank@f-seidel.de>
 L:	lm-sensors@lm-sensors.org
@@ -3528,9 +3534,9 @@ F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
 MARVELL MWL8K WIRELESS DRIVER
-M:	Lennert Buytenhek <buytenh@marvell.com>
+M:	Lennert Buytenhek <buytenh@wantstofly.org>
 L:	linux-wireless@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/net/wireless/mwl8k.c
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
@@ -4480,6 +4486,13 @@ S:	Supported
 F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/qla3xxx.*
 
+QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
+M:	Amit Kumar Salecha <amit.salecha@qlogic.com>
+M:	linux-driver@qlogic.com
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/qlcnic/
+
 QLOGIC QLGE 10Gb ETHERNET DRIVER
 M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
@@ -4874,6 +4887,8 @@ F:	drivers/scsi/be2iscsi/
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:	Sathya Perla <sathyap@serverengines.com>
 M:	Subbu Seetharaman <subbus@serverengines.com>
+M:	Sarveshwar Bandi <sarveshwarb@serverengines.com>
+M:	Ajit Khaparde <ajitk@serverengines.com>
 L:	netdev@vger.kernel.org
 W:	http://www.serverengines.com
 S:	Supported
@@ -5842,6 +5857,15 @@ S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
 
+VIRTIO HOST (VHOST)
+M:	"Michael S. Tsirkin" <mst@redhat.com>
+L:	kvm@vger.kernel.org
+L:	virtualization@lists.osdl.org
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/vhost/
+F:	include/linux/vhost.h
+
 VIA RHINE NETWORK DRIVER
 M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
@@ -6000,7 +6024,7 @@ S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
 WL1251 WIRELESS DRIVER
-M:	Kalle Valo <kalle.valo@nokia.com>
+M:	Kalle Valo <kalle.valo@iki.fi>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
diff --git a/arch/ia64/kvm/Kconfig b/arch/ia64/kvm/Kconfig
index ef3e7be29ca..01c75797119 100644
--- a/arch/ia64/kvm/Kconfig
+++ b/arch/ia64/kvm/Kconfig
@@ -47,6 +47,7 @@ config KVM_INTEL
 	  Provides support for KVM on Itanium 2 processors equipped with the VT
 	  extensions.
 
+source drivers/vhost/Kconfig
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index 795eb362fcf..8b72eaff5b0 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -535,6 +535,7 @@
 			rx-clock-name = "none";
 			tx-clock-name = "clk12";
 			pio-handle = <&pio1>;
+			tbi-handle = <&tbi1>;
 			phy-handle = <&qe_phy0>;
 			phy-connection-type = "rgmii-id";
 		};
@@ -579,7 +580,7 @@
 				reg = <0x6>;
 				device_type = "ethernet-phy";
 			};
-			tbi-phy@11 {
+			tbi1: tbi-phy@11 {
 				reg = <0x11>;
 				device_type = "tbi-phy";
 			};
@@ -590,7 +591,7 @@
 			reg = <0x3520 0x18>;
 			compatible = "fsl,ucc-mdio";
 
-			tbi0: tbi-phy@15 {
+			tbi6: tbi-phy@15 {
 			reg = <0x15>;
 			device_type = "tbi-phy";
 			};
@@ -600,7 +601,7 @@
 			#size-cells = <0>;
 			reg = <0x3720 0x38>;
 			compatible = "fsl,ucc-mdio";
-			tbi1: tbi-phy@17 {
+			tbi8: tbi-phy@17 {
 				reg = <0x17>;
 				device_type = "tbi-phy";
 			};
@@ -617,10 +618,22 @@
 			rx-clock-name = "none";
 			tx-clock-name = "clk12";
 			pio-handle = <&pio3>;
+			tbi-handle = <&tbi3>;
 			phy-handle = <&qe_phy2>;
 			phy-connection-type = "rgmii-id";
 		};
 
+		mdio@2320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2320 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi3: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
 		enet1: ucc@3000 {
 			device_type = "network";
 			compatible = "ucc_geth";
@@ -632,10 +645,22 @@
 			rx-clock-name = "none";
 			tx-clock-name = "clk17";
 			pio-handle = <&pio2>;
+			tbi-handle = <&tbi2>;
 			phy-handle = <&qe_phy1>;
 			phy-connection-type = "rgmii-id";
 		};
 
+		mdio@3120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3120 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi2: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
 		enet3: ucc@3200 {
 			device_type = "network";
 			compatible = "ucc_geth";
@@ -647,10 +672,22 @@
 			rx-clock-name = "none";
 			tx-clock-name = "clk17";
 			pio-handle = <&pio4>;
+			tbi-handle = <&tbi4>;
 			phy-handle = <&qe_phy3>;
 			phy-connection-type = "rgmii-id";
 		};
 
+		mdio@3320 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3320 0x18>;
+			compatible = "fsl,ucc-mdio";
+			tbi4: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
 		enet5: ucc@3400 {
 			device_type = "network";
 			compatible = "ucc_geth";
@@ -661,7 +698,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "none";
-			tbi-handle = <&tbi0>;
+			tbi-handle = <&tbi6>;
 			phy-handle = <&qe_phy5>;
 			phy-connection-type = "sgmii";
 		};
@@ -676,7 +713,7 @@
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			rx-clock-name = "none";
 			tx-clock-name = "none";
-			tbi-handle = <&tbi1>;
+			tbi-handle = <&tbi8>;
 			phy-handle = <&qe_phy7>;
 			phy-connection-type = "sgmii";
 		};
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index b5b25996079..12980d54465 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1004,7 +1004,6 @@ CONFIG_TIGON3=y
 CONFIG_SPIDER_NET=m
 CONFIG_GELIC_NET=m
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 7de127e4cee..32f7058bb17 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -593,7 +593,6 @@ CONFIG_MII=m
 CONFIG_NETDEV_1000=y
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
-# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_NETDEV_10000 is not set
 
 #
diff --git a/arch/powerpc/kvm/Kconfig b/arch/powerpc/kvm/Kconfig
index 6fb6e8aa389..fe037fdaf1b 100644
--- a/arch/powerpc/kvm/Kconfig
+++ b/arch/powerpc/kvm/Kconfig
@@ -75,6 +75,7 @@ config KVM_E500
 
 	  If unsure, say N.
 
+source drivers/vhost/Kconfig
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 04d105d689f..f0684c8ac96 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -237,6 +237,8 @@ static void __init mpc85xx_mds_setup_arch(void)
 		} else if (machine_is(mpc8569_mds)) {
 #define BCSR7_UCC12_GETHnRST	(0x1 << 2)
 #define BCSR8_UEM_MARVELL_RST	(0x1 << 1)
+#define BCSR_UCC_RGMII		(0x1 << 6)
+#define BCSR_UCC_RTBI		(0x1 << 5)
 			/*
 			 * U-Boot mangles interrupt polarity for Marvell PHYs,
 			 * so reset built-in and UEM Marvell PHYs, this puts
@@ -247,6 +249,28 @@ static void __init mpc85xx_mds_setup_arch(void)
 
 			setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
 			clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+			for (np = NULL; (np = of_find_compatible_node(np,
+							"network",
+							"ucc_geth")) != NULL;) {
+				const unsigned int *prop;
+				int ucc_num;
+
+				prop = of_get_property(np, "cell-index", NULL);
+				if (prop == NULL)
+					continue;
+
+				ucc_num = *prop - 1;
+
+				prop = of_get_property(np, "phy-connection-type", NULL);
+				if (prop == NULL)
+					continue;
+
+				if (strcmp("rtbi", (const char *)prop) == 0)
+					clrsetbits_8(&bcsr_regs[7 + ucc_num],
+						BCSR_UCC_RGMII, BCSR_UCC_RTBI);
+			}
+
 		}
 		iounmap(bcsr_regs);
 	}
diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig
index 6ee55ae84ce..a7251580891 100644
--- a/arch/s390/kvm/Kconfig
+++ b/arch/s390/kvm/Kconfig
@@ -35,6 +35,7 @@ config KVM
 
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
+source drivers/vhost/Kconfig
 source drivers/virtio/Kconfig
 
 endif # VIRTUALIZATION
diff --git a/arch/sparc/kernel/sys_sparc32.c b/arch/sparc/kernel/sys_sparc32.c
index dc0ac197e7e..daded3b9639 100644
--- a/arch/sparc/kernel/sys_sparc32.c
+++ b/arch/sparc/kernel/sys_sparc32.c
@@ -43,7 +43,6 @@
 #include <linux/security.h>
 #include <linux/compat.h>
 #include <linux/vfs.h>
-#include <linux/netfilter_ipv4/ip_tables.h>
 #include <linux/ptrace.h>
 
 #include <asm/types.h>
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 4cd49833246..3c4d0109ad2 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -65,6 +65,7 @@ config KVM_AMD
 
 # OK, it's a little counter-intuitive to do this, but it puts it neatly under
 # the virtualization menu.
+source drivers/vhost/Kconfig
 source drivers/lguest/Kconfig
 source drivers/virtio/Kconfig
 
diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c
index 2f0b86b37cf..87e218f98ef 100644
--- a/arch/xtensa/platforms/iss/network.c
+++ b/arch/xtensa/platforms/iss/network.c
@@ -560,7 +560,7 @@ static void iss_net_set_multicast_list(struct net_device *dev)
 #if 0
 	if (dev->flags & IFF_PROMISC)
 		return;
-	else if (dev->mc_count)
+	else if (!netdev_mc_empty(dev))
 		dev->flags |= IFF_ALLMULTI;
 	else
 		dev->flags &= ~IFF_ALLMULTI;
diff --git a/drivers/Makefile b/drivers/Makefile
index 6ee53c7a57a..81e36596b1e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -106,6 +106,7 @@ obj-$(CONFIG_HID)		+= hid/
 obj-$(CONFIG_PPC_PS3)		+= ps3/
 obj-$(CONFIG_OF)		+= of/
 obj-$(CONFIG_SSB)		+= ssb/
+obj-$(CONFIG_VHOST_NET)		+= vhost/
 obj-$(CONFIG_VIRTIO)		+= virtio/
 obj-$(CONFIG_VLYNQ)		+= vlynq/
 obj-$(CONFIG_STAGING)		+= staging/
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index bc53fed89b1..f7d6ebaa041 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2064,12 +2064,10 @@ fore200e_get_esi(struct fore200e* fore200e)
 	return -EBUSY;
     }
 	
-    printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %02x:%02x:%02x:%02x:%02x:%02x\n", 
+    printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %pM\n",
 	   fore200e->name, 
 	   (prom->hw_revision & 0xFF) + '@',    /* probably meaningless with SBA boards */
-	   prom->serial_number & 0xFFFF,
-	   prom->mac_addr[ 2 ], prom->mac_addr[ 3 ], prom->mac_addr[ 4 ],
-	   prom->mac_addr[ 5 ], prom->mac_addr[ 6 ], prom->mac_addr[ 7 ]);
+	   prom->serial_number & 0xFFFF, &prom->mac_addr[2]);
 	
     for (i = 0; i < ESI_LEN; i++) {
 	fore200e->esi[ i ] = fore200e->atm_dev->esi[ i ] = prom->mac_addr[ i + 2 ];
@@ -2845,13 +2843,12 @@ fore200e_proc_read(struct atm_dev *dev, loff_t* pos, char* page)
 		"   interrupt line:\t\t%s\n"
 		"   physical base address:\t0x%p\n"
 		"   virtual base address:\t0x%p\n"
-		"   factory address (ESI):\t%02x:%02x:%02x:%02x:%02x:%02x\n"
+		"   factory address (ESI):\t%pM\n"
 		"   board serial number:\t\t%d\n\n",
 		fore200e_irq_itoa(fore200e->irq),
 		(void*)fore200e->phys_base,
 		fore200e->virt_base,
-		fore200e->esi[0], fore200e->esi[1], fore200e->esi[2],
-		fore200e->esi[3], fore200e->esi[4], fore200e->esi[5],
+		fore200e->esi,
 		fore200e->esi[4] * 256 + fore200e->esi[5]);
 
 	return len;
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index e33ae0025b1..01f36c08cb5 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3557,10 +3557,7 @@ init_card(struct atm_dev *dev)
 	if (tmp) {
 		memcpy(card->atmdev->esi, tmp->dev_addr, 6);
 
-		printk("%s: ESI %02x:%02x:%02x:%02x:%02x:%02x\n",
-		       card->name, card->atmdev->esi[0], card->atmdev->esi[1],
-		       card->atmdev->esi[2], card->atmdev->esi[3],
-		       card->atmdev->esi[4], card->atmdev->esi[5]);
+		printk("%s: ESI %pM\n", card->name, card->atmdev->esi);
 	}
 	/*
 	 * XXX: </hack>
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index cf97c34cbaf..7fe7c324e7e 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -998,9 +998,7 @@ static int __devinit eeprom_validate(struct lanai_dev *lanai)
 			    (unsigned int) e[EEPROM_MAC_REV + i]);
 			return -EIO;
 		}
-	DPRINTK("eeprom: MAC address = %02X:%02X:%02X:%02X:%02X:%02X\n",
-		e[EEPROM_MAC + 0], e[EEPROM_MAC + 1], e[EEPROM_MAC + 2],
-		e[EEPROM_MAC + 3], e[EEPROM_MAC + 4], e[EEPROM_MAC + 5]);
+	DPRINTK("eeprom: MAC address = %pM\n", &e[EEPROM_MAC]);
 	/* Verify serial number */
 	lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL);
 	v = eeprom_be4(lanai, EEPROM_SERIAL_REV);
@@ -2483,14 +2481,8 @@ static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page)
 		return sprintf(page, "revision: board=%d, pci_if=%d\n",
 		    lanai->board_rev, (int) lanai->pci->revision);
 	if (left-- == 0)
-		return sprintf(page, "EEPROM ESI: "
-		    "%02X:%02X:%02X:%02X:%02X:%02X\n",
-		    lanai->eeprom[EEPROM_MAC + 0],
-		    lanai->eeprom[EEPROM_MAC + 1],
-		    lanai->eeprom[EEPROM_MAC + 2],
-		    lanai->eeprom[EEPROM_MAC + 3],
-		    lanai->eeprom[EEPROM_MAC + 4],
-		    lanai->eeprom[EEPROM_MAC + 5]);
+		return sprintf(page, "EEPROM ESI: %pM\n",
+		    &lanai->eeprom[EEPROM_MAC]);
 	if (left-- == 0)
 		return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, "
 		    "GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0,
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 3da804b1627..50838407b11 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -807,9 +807,7 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev)
       }
    }
 
-   printk("nicstar%d: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n", i,
-          card->atmdev->esi[0], card->atmdev->esi[1], card->atmdev->esi[2],
-          card->atmdev->esi[3], card->atmdev->esi[4], card->atmdev->esi[5]);
+   printk("nicstar%d: MAC address %pM\n", i, card->atmdev->esi);
 
    card->atmdev->dev_data = card;
    card->atmdev->ci_range.vpi_bits = card->vpibits;
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index add9485ca5b..128cae4e862 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -143,6 +143,8 @@ static int ath3k_probe(struct usb_interface *intf,
 	usb_set_intfdata(intf, data);
 	if (ath3k_load_firmware(data, data->fw_data, data->fw_size)) {
 		usb_set_intfdata(intf, NULL);
+		kfree(data->fw_data);
+		kfree(data);
 		return -EIO;
 	}
 
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
index eafd4af0746..b0c84c19f44 100644
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -39,7 +39,7 @@
 
 #define VERSION "1.2"
 
-static struct usb_device_id bcm203x_table[] = {
+static const struct usb_device_id bcm203x_table[] = {
 	/* Broadcom Blutonium (BCM2033) */
 	{ USB_DEVICE(0x0a5c, 0x2033) },
 
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
index 2a00707aba3..005919ab043 100644
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -703,7 +703,7 @@ static int bfusb_probe(struct usb_interface *intf, const struct usb_device_id *i
 
 	data->hdev = hdev;
 
-	hdev->type = HCI_USB;
+	hdev->bus = HCI_USB;
 	hdev->driver_data = data;
 	SET_HCIDEV_DEV(hdev, &intf->dev);
 
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
index c2cf8114471..d9bf87ca9e8 100644
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -736,7 +736,7 @@ static int bluecard_open(bluecard_info_t *info)
 
 	info->hdev = hdev;
 
-	hdev->type = HCI_PCCARD;
+	hdev->bus = HCI_PCCARD;
 	hdev->driver_data = info;
 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index c115285867c..d945cd12433 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -469,7 +469,7 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *
 		return -ENOMEM;
 	}
 
-	hdev->type = HCI_USB;
+	hdev->bus = HCI_USB;
 	hdev->driver_data = data;
 
 	data->hdev = hdev;
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 9f5926aaf57..027cb8bf650 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -582,7 +582,7 @@ static int bt3c_open(bt3c_info_t *info)
 
 	info->hdev = hdev;
 
-	hdev->type = HCI_PCCARD;
+	hdev->bus = HCI_PCCARD;
 	hdev->driver_data = info;
 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 
diff --git a/drivers/bluetooth/btmrvl_debugfs.c b/drivers/bluetooth/btmrvl_debugfs.c
index d43b5cb864e..3126a3d0c45 100644
--- a/drivers/bluetooth/btmrvl_debugfs.c
+++ b/drivers/bluetooth/btmrvl_debugfs.c
@@ -26,7 +26,8 @@
 #include "btmrvl_drv.h"
 
 struct btmrvl_debugfs_data {
-	struct dentry *root_dir, *config_dir, *status_dir;
+	struct dentry *config_dir;
+	struct dentry *status_dir;
 
 	/* config */
 	struct dentry *psmode;
@@ -363,6 +364,9 @@ void btmrvl_debugfs_init(struct hci_dev *hdev)
 	struct btmrvl_private *priv = hdev->driver_data;
 	struct btmrvl_debugfs_data *dbg;
 
+	if (!hdev->debugfs)
+		return;
+
 	dbg = kzalloc(sizeof(*dbg), GFP_KERNEL);
 	priv->debugfs_data = dbg;
 
@@ -371,9 +375,7 @@ void btmrvl_debugfs_init(struct hci_dev *hdev)
 		return;
 	}
 
-	dbg->root_dir = debugfs_create_dir("btmrvl", NULL);
-
-	dbg->config_dir = debugfs_create_dir("config", dbg->root_dir);
+	dbg->config_dir = debugfs_create_dir("config", hdev->debugfs);
 
 	dbg->psmode = debugfs_create_file("psmode", 0644, dbg->config_dir,
 				hdev->driver_data, &btmrvl_psmode_fops);
@@ -388,7 +390,7 @@ void btmrvl_debugfs_init(struct hci_dev *hdev)
 	dbg->hscfgcmd = debugfs_create_file("hscfgcmd", 0644, dbg->config_dir,
 				hdev->driver_data, &btmrvl_hscfgcmd_fops);
 
-	dbg->status_dir = debugfs_create_dir("status", dbg->root_dir);
+	dbg->status_dir = debugfs_create_dir("status", hdev->debugfs);
 	dbg->curpsmode = debugfs_create_file("curpsmode", 0444,
 						dbg->status_dir,
 						hdev->driver_data,
@@ -425,7 +427,5 @@ void btmrvl_debugfs_remove(struct hci_dev *hdev)
 	debugfs_remove(dbg->txdnldready);
 	debugfs_remove(dbg->status_dir);
 
-	debugfs_remove(dbg->root_dir);
-
 	kfree(dbg);
 }
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index f97771ce432..53a43adf2e2 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -563,7 +563,7 @@ struct btmrvl_private *btmrvl_add_card(void *card)
 
 	priv->btmrvl_dev.tx_dnld_rdy = true;
 
-	hdev->type = HCI_SDIO;
+	hdev->bus = HCI_SDIO;
 	hdev->open = btmrvl_open;
 	hdev->close = btmrvl_close;
 	hdev->flush = btmrvl_flush;
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 57d965b7f52..94f1f55f81f 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -976,7 +976,7 @@ static struct sdio_driver bt_mrvl_sdio = {
 	.remove		= btmrvl_sdio_remove,
 };
 
-static int btmrvl_sdio_init_module(void)
+static int __init btmrvl_sdio_init_module(void)
 {
 	if (sdio_register_driver(&bt_mrvl_sdio) != 0) {
 		BT_ERR("SDIO Driver Registration Failed");
@@ -989,7 +989,7 @@ static int btmrvl_sdio_init_module(void)
 	return 0;
 }
 
-static void btmrvl_sdio_exit_module(void)
+static void __exit btmrvl_sdio_exit_module(void)
 {
 	/* Set the flag as user is removing this module. */
 	user_rmmod = 1;
diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c
index 7e298275c8f..76e5127884f 100644
--- a/drivers/bluetooth/btsdio.c
+++ b/drivers/bluetooth/btsdio.c
@@ -326,7 +326,7 @@ static int btsdio_probe(struct sdio_func *func,
 		return -ENOMEM;
 	}
 
-	hdev->type = HCI_SDIO;
+	hdev->bus = HCI_SDIO;
 	hdev->driver_data = data;
 
 	data->hdev = hdev;
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
index 91c52309980..60c0953d7d0 100644
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -500,7 +500,7 @@ static int btuart_open(btuart_info_t *info)
 
 	info->hdev = hdev;
 
-	hdev->type = HCI_PCCARD;
+	hdev->bus = HCI_PCCARD;
 	hdev->driver_data = info;
 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a699f09ddf7..5d9cc53bd64 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -939,7 +939,7 @@ static int btusb_probe(struct usb_interface *intf,
 		return -ENOMEM;
 	}
 
-	hdev->type = HCI_USB;
+	hdev->bus = HCI_USB;
 	hdev->driver_data = data;
 
 	data->hdev = hdev;
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 697591941e1..17788317c51 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -485,7 +485,7 @@ static int dtl1_open(dtl1_info_t *info)
 
 	info->hdev = hdev;
 
-	hdev->type = HCI_PCCARD;
+	hdev->bus = HCI_PCCARD;
 	hdev->driver_data = info;
 	SET_HCIDEV_DEV(hdev, &info->p_dev->dev);
 
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index aa0919386b8..76a1abb8f21 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -383,7 +383,7 @@ static int hci_uart_register_dev(struct hci_uart *hu)
 
 	hu->hdev = hdev;
 
-	hdev->type = HCI_UART;
+	hdev->bus = HCI_UART;
 	hdev->driver_data = hu;
 
 	hdev->open  = hci_uart_open;
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 7595274103f..bb0aefdb426 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -236,7 +236,7 @@ static int vhci_open(struct inode *inode, struct file *file)
 
 	data->hdev = hdev;
 
-	hdev->type = HCI_VIRTUAL;
+	hdev->bus = HCI_VIRTUAL;
 	hdev->driver_data = data;
 
 	hdev->open     = vhci_open_dev;
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
author	Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2013-01-11 09:09:13 -0800
committer	Greg Kroah-Hartman <gregkh@linuxfoundation.org>	2013-01-11 09:09:13 -0800
commit	0ba1cd8da86b7c4717852e786bacc7154b62d95c (patch)
tree	f2c526a92ee9f714bff05b076503a6a8bffa8a83 /drivers/block
parent	4ca05c86fde5ea8fd6b1929cb0e14b7993de9ba1 (diff)