Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc Marvell Orion device-tree updates from Olof Johansson:
 "This contains a set of device-tree conversions for Marvell Orion
  platforms that were staged early but took a few tries to get the
  branch into a format where it was suitable for us to pick up.

  Given that most people working on these platforms are hobbyists with
  limited time, we were a bit more flexible with merging it even though
  it came in late."

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: Kirkwood: Replace mrvl with marvell
  ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.
  ARM: Kirkwood: Describe Dreamplug LEDs in DT.
  ARM: Kirkwood: Describe iConnects LEDs in DT.
  ARM: Kirkwood: Describe iConnects temperature sensor in DT.
  ARM: Kirkwood: Describe IB62x0 LEDs in DT.
  ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.
  ARM: Kirkwood: Describe DNS32? gpio-keys in DT.
  ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi
  ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings
  ARM: Kirkwood: Describe DNS325 temperature sensor in DT.
  ARM: Kirkwood: Use DT to configure SATA device.
  ARM: kirkwood: use devicetree for SPI on dreamplug
  ARM: kirkwood: Add LS-XHL and LS-CHLv2 support
  ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net
  ARM: Kirkwood: Add basic device tree support for QNAP TS219.
  ATA: sata_mv: Add device tree support
  ARM: Orion: DTify the watchdog timer.
  ARM: Orion: Add arch support needed for I2C via DT.
  ARM: kirkwood: use devicetree for orion-spi
  ...

Conflicts:
	drivers/watchdog/orion_wdt.c

1 files changed, 29 insertions, 13 deletions

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 24712adf69d..311be18d3f0 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -65,6 +65,8 @@
 #include <linux/mbus.h>
 #include <linux/bitops.h>
 #include <linux/gfp.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_device.h>
@@ -4026,7 +4028,7 @@ static int mv_platform_probe(struct platform_device *pdev)
 	struct ata_host *host;
 	struct mv_host_priv *hpriv;
 	struct resource *res;
-	int n_ports = 0;
+	int n_ports = 0, irq = 0;
 	int rc;
 #if defined(CONFIG_HAVE_CLK)
 	int port;
@@ -4050,8 +4052,14 @@ static int mv_platform_probe(struct platform_device *pdev)
 		return -EINVAL;
 
 	/* allocate host */
-	mv_platform_data = pdev->dev.platform_data;
-	n_ports = mv_platform_data->n_ports;
+	if (pdev->dev.of_node) {
+		of_property_read_u32(pdev->dev.of_node, "nr-ports", &n_ports);
+		irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	} else {
+		mv_platform_data = pdev->dev.platform_data;
+		n_ports = mv_platform_data->n_ports;
+		irq = platform_get_irq(pdev, 0);
+	}
 
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
 	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
@@ -4109,8 +4117,7 @@ static int mv_platform_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "slots %u ports %d\n",
 		 (unsigned)MV_MAX_Q_DEPTH, host->n_ports);
 
-	rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
-			       IRQF_SHARED, &mv6_sht);
+	rc = ata_host_activate(host, irq, mv_interrupt, IRQF_SHARED, &mv6_sht);
 	if (!rc)
 		return 0;
 
@@ -4205,15 +4212,24 @@ static int mv_platform_resume(struct platform_device *pdev)
 #define mv_platform_resume NULL
 #endif
 
+#ifdef CONFIG_OF
+static struct of_device_id mv_sata_dt_ids[] __devinitdata = {
+	{ .compatible = "marvell,orion-sata", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mv_sata_dt_ids);
+#endif
+
 static struct platform_driver mv_platform_driver = {
-	.probe			= mv_platform_probe,
-	.remove			= __devexit_p(mv_platform_remove),
-	.suspend		= mv_platform_suspend,
-	.resume			= mv_platform_resume,
-	.driver			= {
-				   .name = DRV_NAME,
-				   .owner = THIS_MODULE,
-				  },
+	.probe		= mv_platform_probe,
+	.remove		= __devexit_p(mv_platform_remove),
+	.suspend	= mv_platform_suspend,
+	.resume		= mv_platform_resume,
+	.driver		= {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(mv_sata_dt_ids),
+	},
 };