Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable

Conflicts:
	arch/arm/mach-pxa/tosa.c

42 files changed, 280 insertions, 141 deletions

diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
index 833306ee9e7..ea297ac70bc 100644
--- a/arch/arm/include/asm/mach/udc_pxa2xx.h
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -20,8 +20,6 @@ struct pxa2xx_udc_mach_info {
 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
 	 * here.  Note that sometimes the signals go through inverters...
 	 */
-	bool	gpio_vbus_inverted;
-	int	gpio_vbus;			/* high == vbus present */
 	bool	gpio_pullup_inverted;
 	int	gpio_pullup;			/* high == pullup activated */
 };
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 3499fada73a..4cb069fd9af 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -128,8 +128,8 @@ static int am200_init_gpio_regs(struct metronomefb_par *par)
 	return 0;
 
 err_req_gpio:
-	while (i > 0)
-		gpio_free(gpios[i--]);
+	while (--i >= 0)
+		gpio_free(gpios[i]);
 
 	return err;
 }
@@ -194,7 +194,7 @@ static struct notifier_block am200_fb_notif = {
 };
 
 /* this gets called as part of our init. these steps must be done now so
- * that we can use set_pxa_fb_info */
+ * that we can use pxa_set_fb_info */
 static void __init am200_presetup_fb(void)
 {
 	int fw;
@@ -249,7 +249,7 @@ static void __init am200_presetup_fb(void)
 	/* we divide since we told the LCD controller we're 16bpp */
 	am200_fb_info.modes->xres /= 2;
 
-	set_pxa_fb_info(&am200_fb_info);
+	pxa_set_fb_info(NULL, &am200_fb_info);
 
 }
 
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index 993d75e6639..fa8bad235d9 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -125,10 +125,7 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 		if (err) {
 			dev_err(&am300_device->dev, "failed requesting "
 				"gpio %d, err=%d\n", i, err);
-			while (i >= DB0_GPIO_PIN)
-				gpio_free(i--);
-			i = ARRAY_SIZE(gpios) - 1;
-			goto err_req_gpio;
+			goto err_req_gpio2;
 		}
 	}
 
@@ -159,9 +156,13 @@ static int am300_init_gpio_regs(struct broadsheetfb_par *par)
 
 	return 0;
 
+err_req_gpio2:
+	while (--i >= DB0_GPIO_PIN)
+		gpio_free(i);
+	i = ARRAY_SIZE(gpios);
 err_req_gpio:
-	while (i > 0)
-		gpio_free(gpios[i--]);
+	while (--i >= 0)
+		gpio_free(gpios[i]);
 
 	return err;
 }
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index d2af73321da..c6661b1d30b 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -263,7 +263,7 @@ static void __init balloon3_lcd_init(void)
 	}
 
 	balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power;
-	set_pxa_fb_info(&balloon3_lcd_screen);
+	pxa_set_fb_info(NULL, &balloon3_lcd_screen);
 	return;
 
 err2:
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b734d846816..8225e2e58c6 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -379,7 +379,7 @@ __setup("monitor=", cmx2xx_set_display);
 
 static void __init cmx2xx_init_display(void)
 {
-	set_pxa_fb_info(cmx2xx_display);
+	pxa_set_fb_info(NULL, cmx2xx_display);
 }
 #else
 static inline void cmx2xx_init_display(void) {}
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index bfca7ed2fea..7a8edba0dcd 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -296,7 +296,7 @@ static struct pxafb_mach_info cm_x300_lcd = {
 
 static void __init cm_x300_init_lcd(void)
 {
-	set_pxa_fb_info(&cm_x300_lcd);
+	pxa_set_fb_info(NULL, &cm_x300_lcd);
 }
 #else
 static inline void cm_x300_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c
index ee797397dc5..44c1b77ece6 100644
--- a/arch/arm/mach-pxa/colibri-pxa270-income.c
+++ b/arch/arm/mach-pxa/colibri-pxa270-income.c
@@ -175,7 +175,7 @@ static struct pxafb_mach_info income_lcd_screen = {
 
 static void __init income_lcd_init(void)
 {
-	set_pxa_fb_info(&income_lcd_screen);
+	pxa_set_fb_info(NULL, &income_lcd_screen);
 }
 #else
 static inline void income_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index 96b2d9fbfef..3f9be419959 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -105,7 +105,7 @@ void __init colibri_pxa3xx_init_lcd(int bl_pin)
 	lcd_bl_pin = bl_pin;
 	gpio_request(bl_pin, "lcd backlight");
 	gpio_direction_output(bl_pin, 0);
-	set_pxa_fb_info(&sharp_lq43_info);
+	pxa_set_fb_info(NULL, &sharp_lq43_info);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index d4e705caefe..3a5507e3191 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -462,7 +462,6 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
-	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index c4bf08b3eb6..2e0425404de 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -90,7 +90,6 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
 
 static struct pxa2xx_udc_mach_info pxa_udc_info = {
 	.gpio_pullup = -1,
-	.gpio_vbus   = -1,
 };
 
 void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
@@ -188,16 +187,12 @@ struct platform_device pxa_device_fb = {
 	.resource	= pxafb_resources,
 };
 
-void __init set_pxa_fb_info(struct pxafb_mach_info *info)
+void __init pxa_set_fb_info(struct device *parent, struct pxafb_mach_info *info)
 {
+	pxa_device_fb.dev.parent = parent;
 	pxa_register_device(&pxa_device_fb, info);
 }
 
-void __init set_pxa_fb_parent(struct device *parent_dev)
-{
-	pxa_device_fb.dev.parent = parent_dev;
-}
-
 static struct resource pxa_resource_ffuart[] = {
 	{
 		.start	= 0x40100000,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index b411d7cbf5a..f8a6e9d79a3 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -689,7 +689,7 @@ static struct pxafb_mach_info em_x270_lcd = {
 
 static void __init em_x270_init_lcd(void)
 {
-	set_pxa_fb_info(&em_x270_lcd);
+	pxa_set_fb_info(NULL, &em_x270_lcd);
 }
 #else
 static inline void em_x270_init_lcd(void) {}
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index edca0a04329..2e3970fdde0 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -20,6 +20,7 @@
 #include <linux/mfd/t7l66xb.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <video/w100fb.h>
 
@@ -51,12 +52,20 @@ void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
-struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+struct gpio_vbus_mach_info e7xx_udc_info = {
 	.gpio_vbus   = GPIO_E7XX_USB_DISC,
 	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
 	.gpio_pullup_inverted = 1
 };
 
+static struct platform_device e7xx_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e7xx_udc_info,
+	},
+};
+
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
 	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
@@ -165,6 +174,7 @@ static struct platform_device e330_tc6387xb_device = {
 
 static struct platform_device *e330_devices[] __initdata = {
 	&e330_tc6387xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e330_init(void)
@@ -175,7 +185,6 @@ static void __init e330_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e330_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E330, "Toshiba e330")
@@ -214,6 +223,7 @@ static struct platform_device e350_t7l66xb_device = {
 
 static struct platform_device *e350_devices[] __initdata = {
 	&e350_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e350_init(void)
@@ -224,7 +234,6 @@ static void __init e350_init(void)
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e350_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E350, "Toshiba e350")
@@ -333,6 +342,7 @@ static struct platform_device e400_t7l66xb_device = {
 
 static struct platform_device *e400_devices[] __initdata = {
 	&e400_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e400_init(void)
@@ -344,9 +354,8 @@ static void __init e400_init(void)
 	/* Fixme - e400 may have a switched clock */
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
-	set_pxa_fb_info(&e400_pxafb_mach_info);
+	pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(e400_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 }
 
 MACHINE_START(E400, "Toshiba e400")
@@ -519,6 +528,7 @@ static struct platform_device e740_t7l66xb_device = {
 static struct platform_device *e740_devices[] __initdata = {
 	&e740_fb_device,
 	&e740_t7l66xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e740_init(void)
@@ -532,7 +542,6 @@ static void __init e740_init(void)
 			"UDCCLK", &pxa25x_device_udc.dev),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e740_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
@@ -711,6 +720,7 @@ static struct platform_device e750_tc6393xb_device = {
 static struct platform_device *e750_devices[] __initdata = {
 	&e750_fb_device,
 	&e750_tc6393xb_device,
+	&e7xx_gpio_vbus,
 };
 
 static void __init e750_init(void)
@@ -723,7 +733,6 @@ static void __init e750_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e750_devices));
-	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
@@ -873,12 +882,21 @@ static struct platform_device e800_fb_device = {
 
 /* --------------------------- UDC definitions --------------------------- */
 
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+static struct gpio_vbus_mach_info e800_udc_info = {
 	.gpio_vbus   = GPIO_E800_USB_DISC,
 	.gpio_pullup = GPIO_E800_USB_PULLUP,
 	.gpio_pullup_inverted = 1
 };
 
+static struct platform_device e800_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &e800_udc_info,
+	},
+};
+
+
 /* ----------------- e800 tc6393xb parameters ------------------ */
 
 static struct tc6393xb_platform_data e800_tc6393xb_info = {
@@ -907,6 +925,7 @@ static struct platform_device e800_tc6393xb_device = {
 static struct platform_device *e800_devices[] __initdata = {
 	&e800_fb_device,
 	&e800_tc6393xb_device,
+	&e800_gpio_vbus,
 };
 
 static void __init e800_init(void)
@@ -919,7 +938,6 @@ static void __init e800_init(void)
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
 	platform_add_devices(ARRAY_AND_SIZE(e800_devices));
-	pxa_set_udc_info(&e800_udc_mach_info);
 	pxa_set_ac97_info(NULL);
 }
 
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 93f05e02431..d88aed8fbe1 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -783,7 +783,7 @@ static void __init a780_init(void)
 
 	pxa_set_i2c_info(NULL);
 
-	set_pxa_fb_info(&ezx_fb_info_1);
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
@@ -853,7 +853,7 @@ static void __init e680_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_1);
+	pxa_set_fb_info(NULL, &ezx_fb_info_1);
 
 	pxa_set_keypad_info(&e680_keypad_platform_data);
 
@@ -918,7 +918,7 @@ static void __init a1200_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a1200_keypad_platform_data);
 
@@ -1103,7 +1103,7 @@ static void __init a910_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
@@ -1173,7 +1173,7 @@ static void __init e6_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&e6_keypad_platform_data);
 
@@ -1212,7 +1212,7 @@ static void __init e2_init(void)
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
 
-	set_pxa_fb_info(&ezx_fb_info_2);
+	pxa_set_fb_info(NULL, &ezx_fb_info_2);
 
 	pxa_set_keypad_info(&e2_keypad_platform_data);
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 6fd319ea528..d65e4bde9b9 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,6 +26,7 @@
 #include <linux/gpio.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/usb/gpio_vbus.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -106,14 +107,22 @@ static void __init gumstix_mmc_init(void)
 #endif
 
 #ifdef CONFIG_USB_GADGET_PXA25X
-static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
+static struct gpio_vbus_mach_info gumstix_udc_info = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
 };
 
+static struct platform_device gumstix_gpio_vbus = {
+	.name	= "gpio-vbus",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gumstix_udc_info,
+	},
+};
+
 static void __init gumstix_udc_init(void)
 {
-	pxa_set_udc_info(&gumstix_udc_info);
+	platform_device_register(&gumstix_gpio_vbus);
 }
 #else
 static void gumstix_udc_init(void)
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index dd40e4a9291..f7fb64f11a7 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -167,7 +167,7 @@ static void __init idp_init(void)
 
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
-	set_pxa_fb_info(&sharp_lm8v31);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&idp_mci_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2bbcf70dd93..0d4700a7961 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -44,6 +44,11 @@
 #define GPIO_NR_PALMZ72_BT_POWER		17
 #define GPIO_NR_PALMZ72_BT_RESET		83
 
+/* Camera */
+#define GPIO_NR_PALMZ72_CAM_PWDN		56
+#define GPIO_NR_PALMZ72_CAM_RESET		57
+#define GPIO_NR_PALMZ72_CAM_POWER		91
+
 /** Initial values **/
 
 /* Battery */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 160ec83f51a..01a45ac4811 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -154,8 +154,8 @@ struct pxafb_mach_info {
 	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
 	void (*smart_update)(struct fb_info *);
 };
-void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
-void set_pxa_fb_parent(struct device *parent_dev);
+
+void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
 unsigned long pxafb_get_hsync_time(struct device *dev);
 
 extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/include/mach/z2.h
index 8835c16bc82..7b0f71ef316 100644
--- a/arch/arm/mach-pxa/include/mach/z2.h
+++ b/arch/arm/mach-pxa/include/mach/z2.h
@@ -25,8 +25,7 @@
 #define	GPIO98_ZIPITZ2_LID_BUTTON	98
 
 /* Libertas GSPI8686 WiFi */
-#define	GPIO14_ZIPITZ2_WIFI_RESET	14
-#define	GPIO15_ZIPITZ2_WIFI_POWER	15
+#define	GPIO14_ZIPITZ2_WIFI_POWER	14
 #define	GPIO24_ZIPITZ2_WIFI_CS		24
 #define	GPIO36_ZIPITZ2_WIFI_IRQ		36
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 87c1ed9ccd2..e5e326d2cdc 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -185,7 +185,7 @@ static struct pxafb_mach_info littleton_lcd_info = {
 
 static void littleton_init_lcd(void)
 {
-	set_pxa_fb_info(&littleton_lcd_info);
+	pxa_set_fb_info(NULL, &littleton_lcd_info);
 }
 #else
 static inline void littleton_init_lcd(void) {};
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index c9a3e775c2d..8aebc58c9f1 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -480,7 +480,7 @@ static void __init lpd270_init(void)
 	pxa_set_ac97_info(NULL);
 
 	if (lpd270_lcd_to_use != NULL)
-		set_pxa_fb_info(lpd270_lcd_to_use);
+		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
 
 	pxa_set_ohci_info(&lpd270_ohci_platform_data);
 }
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index dca20de306b..12a2a56b215 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -521,7 +521,7 @@ static void __init lubbock_init(void)
 
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
-	set_pxa_fb_info(&sharp_lm8v31);
+	pxa_set_fb_info(NULL, &sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
 	pxa_set_ficp_info(&lubbock_ficp_platform_data);
 	pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5535991c4a3..a72993dde2b 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -757,7 +757,7 @@ static void __init magician_init(void)
 		gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0);
 		gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0);
 		gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0);
-		set_pxa_fb_info(lcd_select ? &samsung_info : &toppoly_info);
+		pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
 	} else
 		pr_err("LCD detection: CPLD mapping failed\n");
 }
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f9542220595..8306b227e61 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -592,7 +592,7 @@ static void __init mainstone_init(void)
 	else
 		mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
 
-	set_pxa_fb_info(&mainstone_pxafb_info);
+	pxa_set_fb_info(NULL, &mainstone_pxafb_info);
 	mainstone_backlight_register();
 
 	pxa_set_mci_info(&mainstone_mci_platform_data);
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 78d98a8607e..dd13bb63259 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -795,7 +795,7 @@ static void __init mioa701_machine_init(void)
 	pxa_set_stuart_info(NULL);
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
-	set_pxa_fb_info(&mioa701_pxafb_info);
+	pxa_set_fb_info(NULL, &mioa701_pxafb_info);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	pxa_set_udc_info(&mioa701_udc_info);
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 72adb3ae2b4..325c245c0a0 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -1,8 +1,7 @@
 /*
  * Common code for Palm LD, T5, TX, Z72
  *
- * Copyright (C) 2010
- * Marek Vasut <marek.vasut@gmail.com>
+ * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -158,7 +157,7 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
 		palm27x_lcd_screen.pxafb_lcd_power = palm27x_lcd_ctl;
 	}
 
-	set_pxa_fb_info(&palm27x_lcd_screen);
+	pxa_set_fb_info(NULL, &palm27x_lcd_screen);
 }
 #endif
 
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index a09a2374697..fb06bd04727 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -507,7 +507,7 @@ static struct pxafb_mach_info palmtc_lcd_screen = {
 
 static void __init palmtc_lcd_init(void)
 {
-	set_pxa_fb_info(&palmtc_lcd_screen);
+	pxa_set_fb_info(NULL, &palmtc_lcd_screen);
 }
 #else
 static inline void palmtc_lcd_init(void) {}
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 3f25014a136..726f5b98dcd 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -136,30 +136,14 @@ static struct platform_device palmte2_pxa_keys = {
 /******************************************************************************
  * Backlight
  ******************************************************************************/
+static struct gpio palmte_bl_gpios[] = {
+	{ GPIO_NR_PALMTE2_BL_POWER, GPIOF_INIT_LOW, "Backlight power" },
+	{ GPIO_NR_PALMTE2_LCD_POWER, GPIOF_INIT_LOW, "LCD power" },
+};
+
 static int palmte2_backlight_init(struct device *dev)
 {
-	int ret;
-
-	ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER");
-	if (ret)
-		goto err;
-	ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0);
-	if (ret)
-		goto err2;
-	ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0);
-	if (ret)
-		goto err3;
-
-	return 0;
-err3:
-	gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
-err2:
-	gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-err:
-	return ret;
+	return gpio_request_array(ARRAY_AND_SIZE(palmte_bl_gpios));
 }
 
 static int palmte2_backlight_notify(struct device *dev, int brightness)
@@ -171,8 +155,7 @@ static int palmte2_backlight_notify(struct device *dev, int brightness)
 
 static void palmte2_backlight_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_PALMTE2_BL_POWER);
-	gpio_free(GPIO_NR_PALMTE2_LCD_POWER);
+	gpio_free_array(ARRAY_AND_SIZE(palmte_bl_gpios));
 }
 
 static struct platform_pwm_backlight_data palmte2_backlight_data = {
@@ -363,7 +346,7 @@ static void __init palmte2_init(void)
 	pxa_set_btuart_info(NULL);
 	pxa_set_stuart_info(NULL);
 
-	set_pxa_fb_info(&palmte2_lcd_screen);
+	pxa_set_fb_info(NULL, &palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
 	pxa_set_ac97_info(&palmte2_ac97_pdata);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 3010193b081..3b8a4f37dbb 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -30,6 +30,7 @@
 #include <linux/wm97xx.h>
 #include <linux/power_supply.h>
 #include &