Merge branch 'master' of /usr/src/ntfs-2.6/

83 files changed, 5127 insertions, 12171 deletions

diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
index 84d96b857e4..8ace2a1f3b4 100644
--- a/arch/ppc/4xx_io/serial_sicc.c
+++ b/arch/ppc/4xx_io/serial_sicc.c
@@ -47,6 +47,7 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/init.h>
+#include <linux/capability.h>
 #include <linux/circ_buf.h>
 #include <linux/serial.h>
 #include <linux/console.h>
@@ -214,7 +215,6 @@ static struct tty_driver *siccnormal_driver;
  * memory if large numbers of serial ports are open.
  */
 static u_char *tmp_buf;
-static DECLARE_MUTEX(tmp_buf_sem);
 
 #define HIGH_BITS_OFFSET    ((sizeof(long)-sizeof(int))*8)
 
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index cc3f64c084c..11899f06bf0 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -8,9 +8,6 @@ config MMU
 	bool
 	default y
 
-config UID16
-	bool
-
 config GENERIC_HARDIRQS
 	bool
 	default y
@@ -61,11 +58,11 @@ config 6xx
 	help
 	  There are four types of PowerPC chips supported.  The more common
 	  types (601, 603, 604, 740, 750, 7400), the Motorola embedded
-	  versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded
-	  versions (403 and 405) and the high end 64 bit Power processors
-	  (POWER 3, POWER4, and IBM 970 also known as G5)
+	  versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM
+	  embedded versions (403 and 405) and the POWER3 processor.
+	  (For support for more recent 64-bit processors, set ARCH=powerpc.)
 	  Unless you are building a kernel for one of the embedded processor
-	  systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
+	  systems or a POWER3-based IBM RS/6000, choose 6xx.
 	  Note that the kernel runs in 32-bit mode even on 64-bit chips.
 	  Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
 	  specific support for that chipset is asked later on.
@@ -80,10 +77,6 @@ config POWER3
 	select PPC_FPU
 	bool "POWER3"
 
-config POWER4
-	select PPC_FPU
-	bool "POWER4 and 970 (G5)"
-
 config 8xx
 	bool "8xx"
 
@@ -126,7 +119,7 @@ config PHYS_64BIT
 
 config ALTIVEC
 	bool "AltiVec Support"
-	depends on 6xx || POWER4
+	depends on 6xx
 	depends on !8260 && !83xx
 	---help---
 	  This option enables kernel support for the Altivec extensions to the
@@ -238,18 +231,9 @@ config KEXEC
 
 source "drivers/cpufreq/Kconfig"
 
-config CPU_FREQ_PMAC
-	bool "Support for Apple PowerBooks"
-	depends on CPU_FREQ && ADB_PMU
-	select CPU_FREQ_TABLE
-	help
-	  This adds support for frequency switching on Apple PowerBooks,
-	  this currently includes some models of iBook & Titanium
-	  PowerBook.
-
 config PPC601_SYNC_FIX
 	bool "Workarounds for PPC601 bugs"
-	depends on 6xx && (PPC_PREP || PPC_PMAC)
+	depends on 6xx && PPC_PREP
 	help
 	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
 	  mean that extra synchronization instructions are required near
@@ -261,26 +245,17 @@ config PPC601_SYNC_FIX
 
 	  If in doubt, say Y here.
 
-config HOTPLUG_CPU
-	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && PPC_PMAC
-	---help---
-	  Say Y here to be able to disable and re-enable individual
-	  CPUs at runtime on SMP machines.
-
-	  Say N if you are unsure.
-
 source arch/ppc/platforms/4xx/Kconfig
 source arch/ppc/platforms/85xx/Kconfig
 
 config PPC64BRIDGE
 	bool
-	depends on POWER3 || POWER4
+	depends on POWER3
 	default y
 
 config PPC_STD_MMU
 	bool
-	depends on 6xx || POWER3 || POWER4
+	depends on 6xx || POWER3
 	default y
 
 config NOT_COHERENT_CACHE
@@ -508,7 +483,7 @@ endchoice
 
 choice
 	prompt "Machine Type"
-	depends on 6xx || POWER3 || POWER4
+	depends on 6xx || POWER3
 	default PPC_MULTIPLATFORM
 	---help---
 	  Linux currently supports several different kinds of PowerPC-based
@@ -519,11 +494,15 @@ choice
 	  Platform) machines (including all of the recent IBM RS/6000 and
 	  pSeries machines), and several embedded PowerPC systems containing
 	  4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
-	  default option is to build a kernel which works on the first three.
+	  default option is to build a kernel which works on PReP and CHRP.
+
+	  Note that support for Apple machines is now only available with
+	  ARCH=powerpc, and has been removed from this menu.  If you wish
+	  to build a kernel for an Apple machine, exit this configuration
+	  process and re-run it with ARCH=powerpc.
 
-	  Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or
-	  pSeries machine, a Power Macintosh (including iMacs, iBooks and
-	  Powerbooks), or a PReP machine.
+	  Select CHRP/PReP if configuring for an IBM RS/6000 or
+	  pSeries machine, or a PReP machine.
 
 	  Select Gemini if configuring for a Synergy Microsystems' Gemini
 	  series Single Board Computer.  More information is available at:
@@ -533,7 +512,7 @@ choice
 	  available at: <http://linux-apus.sourceforge.net/>.
 
 config PPC_MULTIPLATFORM
-	bool "CHRP/PowerMac/PReP"
+	bool "CHRP/PReP"
 
 config APUS
 	bool "Amiga-APUS"
@@ -746,6 +725,10 @@ config MPC834x
 	bool
 	default y if MPC834x_SYS
 
+config PPC_83xx
+	bool
+	default y if 83xx
+
 config CPM1
 	bool
 	depends on 8xx
@@ -767,25 +750,14 @@ config CPM2
 	  on it (826x, 827x, 8560).
 
 config PPC_CHRP
-	bool
+	bool "Support for CHRP (Common Hardware Reference Platform) machines"
 	depends on PPC_MULTIPLATFORM
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
 	default y
 
-config PPC_PMAC
-	bool
-	depends on PPC_MULTIPLATFORM
-	select PPC_INDIRECT_PCI
-	default y
-
-config PPC_PMAC64
-	bool
-	depends on PPC_PMAC && POWER4
-	default y
-
 config PPC_PREP
-	bool
+	bool "Support for PReP (PowerPC Reference Platform) machines"
 	depends on PPC_MULTIPLATFORM
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
@@ -793,7 +765,7 @@ config PPC_PREP
 
 config PPC_OF
 	bool
-	depends on PPC_PMAC || PPC_CHRP
+	depends on PPC_CHRP
 	default y
 
 config PPC_GEN550
@@ -1165,7 +1137,7 @@ config ISA
 
 config GENERIC_ISA_DMA
 	bool
-	depends on POWER3 || POWER4 || 6xx && !CPM2
+	depends on POWER3 || 6xx && !CPM2
 	default y
 
 config PPC_I8259
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index e719a4933af..98e940beeb3 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -128,10 +128,9 @@ TOUT	:= .tmp_gas_check
 # Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
 # instructions.
 # gcc-3.4 and binutils-2.14 are a fatal combination.
-GCC_VERSION	:= $(call cc-version)
 
 checkbin:
-	@if test "$(GCC_VERSION)" = "0304" ; then \
+	@if test "$(call cc-version)" = "0304" ; then \
 		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
 			echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
 			echo 'correctly with gcc-3.4 and your version of binutils.'; \
diff --git a/arch/ppc/amiga/amiints.c b/arch/ppc/amiga/amiints.c
index 91195e2ce38..5f35cf3986f 100644
--- a/arch/ppc/amiga/amiints.c
+++ b/arch/ppc/amiga/amiints.c
@@ -96,8 +96,8 @@ void amiga_init_IRQ(void)
 		gayle.inten = GAYLE_IRQ_IDE;
 
 	/* turn off all interrupts... */
-	custom.intena = 0x7fff;
-	custom.intreq = 0x7fff;
+	amiga_custom.intena = 0x7fff;
+	amiga_custom.intreq = 0x7fff;
 
 #ifdef CONFIG_APUS
 	/* Clear any inter-CPU interrupt requests. Circumvents bug in
@@ -110,7 +110,7 @@ void amiga_init_IRQ(void)
 	APUS_WRITE(APUS_IPL_EMU, IPLEMU_SETRESET | IPLEMU_IPLMASK);
 #endif
 	/* ... and enable the master interrupt bit */
-	custom.intena = IF_SETCLR | IF_INTEN;
+	amiga_custom.intena = IF_SETCLR | IF_INTEN;
 
 	cia_init_IRQ(&ciaa_base);
 	cia_init_IRQ(&ciab_base);
@@ -151,7 +151,7 @@ void amiga_enable_irq(unsigned int irq)
 	}
 
 	/* enable the interrupt */
-	custom.intena = IF_SETCLR | ami_intena_vals[irq];
+	amiga_custom.intena = IF_SETCLR | ami_intena_vals[irq];
 }
 
 void amiga_disable_irq(unsigned int irq)
@@ -177,7 +177,7 @@ void amiga_disable_irq(unsigned int irq)
 	}
 
 	/* disable the interrupt */
-	custom.intena = ami_intena_vals[irq];
+	amiga_custom.intena = ami_intena_vals[irq];
 }
 
 inline void amiga_do_irq(int irq, struct pt_regs *fp)
@@ -196,7 +196,7 @@ void amiga_do_irq_list(int irq, struct pt_regs *fp)
 
 	kstat_cpu(0).irqs[irq]++;
 
-	custom.intreq = ami_intena_vals[irq];
+	amiga_custom.intreq = ami_intena_vals[irq];
 
 	for (action = desc->action; action; action = action->next)
 		action->handler(irq, action->dev_id, fp);
@@ -208,40 +208,40 @@ void amiga_do_irq_list(int irq, struct pt_regs *fp)
 
 static void ami_int1(int irq, void *dev_id, struct pt_regs *fp)
 {
-	unsigned short ints = custom.intreqr & custom.intenar;
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if serial transmit buffer empty, interrupt */
 	if (ints & IF_TBE) {
-		custom.intreq = IF_TBE;
+		amiga_custom.intreq = IF_TBE;
 		amiga_do_irq(IRQ_AMIGA_TBE, fp);
 	}
 
 	/* if floppy disk transfer complete, interrupt */
 	if (ints & IF_DSKBLK) {
-		custom.intreq = IF_DSKBLK;
+		amiga_custom.intreq = IF_DSKBLK;
 		amiga_do_irq(IRQ_AMIGA_DSKBLK, fp);
 	}
 
 	/* if software interrupt set, interrupt */
 	if (ints & IF_SOFT) {
-		custom.intreq = IF_SOFT;
+		amiga_custom.intreq = IF_SOFT;
 		amiga_do_irq(IRQ_AMIGA_SOFT, fp);
 	}
 }
 
 static void ami_int3(int irq, void *dev_id, struct pt_regs *fp)
 {
-	unsigned short ints = custom.intreqr & custom.intenar;
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if a blitter interrupt */
 	if (ints & IF_BLIT) {
-		custom.intreq = IF_BLIT;
+		amiga_custom.intreq = IF_BLIT;
 		amiga_do_irq(IRQ_AMIGA_BLIT, fp);
 	}
 
 	/* if a copper interrupt */
 	if (ints & IF_COPER) {
-		custom.intreq = IF_COPER;
+		amiga_custom.intreq = IF_COPER;
 		amiga_do_irq(IRQ_AMIGA_COPPER, fp);
 	}
 
@@ -252,36 +252,36 @@ static void ami_int3(int irq, void *dev_id, struct pt_regs *fp)
 
 static void ami_int4(int irq, void *dev_id, struct pt_regs *fp)
 {
-	unsigned short ints = custom.intreqr & custom.intenar;
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if audio 0 interrupt */
 	if (ints & IF_AUD0) {
-		custom.intreq = IF_AUD0;
+		amiga_custom.intreq = IF_AUD0;
 		amiga_do_irq(IRQ_AMIGA_AUD0, fp);
 	}
 
 	/* if audio 1 interrupt */
 	if (ints & IF_AUD1) {
-		custom.intreq = IF_AUD1;
+		amiga_custom.intreq = IF_AUD1;
 		amiga_do_irq(IRQ_AMIGA_AUD1, fp);
 	}
 
 	/* if audio 2 interrupt */
 	if (ints & IF_AUD2) {
-		custom.intreq = IF_AUD2;
+		amiga_custom.intreq = IF_AUD2;
 		amiga_do_irq(IRQ_AMIGA_AUD2, fp);
 	}
 
 	/* if audio 3 interrupt */
 	if (ints & IF_AUD3) {
-		custom.intreq = IF_AUD3;
+		amiga_custom.intreq = IF_AUD3;
 		amiga_do_irq(IRQ_AMIGA_AUD3, fp);
 	}
 }
 
 static void ami_int5(int irq, void *dev_id, struct pt_regs *fp)
 {
-	unsigned short ints = custom.intreqr & custom.intenar;
+	unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
 
 	/* if serial receive buffer full interrupt */
 	if (ints & IF_RBF) {
@@ -291,7 +291,7 @@ static void ami_int5(int irq, void *dev_id, struct pt_regs *fp)
 
 	/* if a disk sync interrupt */
 	if (ints & IF_DSKSYN) {
-		custom.intreq = IF_DSKSYN;
+		amiga_custom.intreq = IF_DSKSYN;
 		amiga_do_irq(IRQ_AMIGA_DSKSYN, fp);
 	}
 }
diff --git a/arch/ppc/amiga/cia.c b/arch/ppc/amiga/cia.c
index ad961465b6c..4431c58f611 100644
--- a/arch/ppc/amiga/cia.c
+++ b/arch/ppc/amiga/cia.c
@@ -66,7 +66,7 @@ static unsigned char cia_set_irq_private(struct ciabase *base,
 	else
 		base->icr_data &= ~mask;
 	if (base->icr_data & base->icr_mask)
-		custom.intreq = IF_SETCLR | base->int_mask;
+		amiga_custom.intreq = IF_SETCLR | base->int_mask;
 	return old & base->icr_mask;
 }
 
@@ -114,7 +114,7 @@ static unsigned char cia_able_irq_private(struct ciabase *base,
 	base->icr_mask &= CIA_ICR_ALL;
 
 	if (base->icr_data & base->icr_mask)
-		custom.intreq = IF_SETCLR | base->int_mask;
+		amiga_custom.intreq = IF_SETCLR | base->int_mask;
 	return old;
 }
 
@@ -145,7 +145,7 @@ static void cia_handler(int irq, void *dev_id, struct pt_regs *fp)
 	irq = base->cia_irq;
 	desc = irq_desc + irq;
 	ints = cia_set_irq_private(base, CIA_ICR_ALL);
-	custom.intreq = base->int_mask;
+	amiga_custom.intreq = base->int_mask;
 	for (i = 0; i < CIA_IRQS; i++, irq++) {
 		if (ints & 1) {
 			kstat_cpu(0).irqs[irq]++;
@@ -174,5 +174,5 @@ void __init cia_init_IRQ(struct ciabase *base)
 	action->name = base->name;
 	setup_irq(base->handler_irq, &amiga_sys_irqaction[base->handler_irq-IRQ_AMIGA_AUTO]);
 
-	custom.intena = IF_SETCLR | base->int_mask;
+	amiga_custom.intena = IF_SETCLR | base->int_mask;
 }
diff --git a/arch/ppc/amiga/config.c b/arch/ppc/amiga/config.c
index af881d7454d..60e2da1c92c 100644
--- a/arch/ppc/amiga/config.c
+++ b/arch/ppc/amiga/config.c
@@ -90,9 +90,6 @@ static void a3000_gettod (int *, int *, int *, int *, int *, int *);
 static void a2000_gettod (int *, int *, int *, int *, int *, int *);
 static int amiga_hwclk (int, struct hwclk_time *);
 static int amiga_set_clock_mmss (unsigned long);
-#ifdef CONFIG_AMIGA_FLOPPY
-extern void amiga_floppy_setup(char *, int *);
-#endif
 static void amiga_reset (void);
 extern void amiga_init_sound(void);
 static void amiga_savekmsg_init(void);
@@ -281,7 +278,7 @@ static void __init amiga_identify(void)
     case CS_OCS:
     case CS_ECS:
     case CS_AGA:
-      switch (custom.deniseid & 0xf) {
+      switch (amiga_custom.deniseid & 0xf) {
       case 0x0c:
 	AMIGAHW_SET(DENISE_HR);
 	break;
@@ -294,7 +291,7 @@ static void __init amiga_identify(void)
       AMIGAHW_SET(DENISE);
       break;
     }
-    switch ((custom.vposr>>8) & 0x7f) {
+    switch ((amiga_custom.vposr>>8) & 0x7f) {
     case 0x00:
       AMIGAHW_SET(AGNUS_PAL);
       break;
@@ -419,9 +416,6 @@ void __init config_amiga(void)
 
   mach_hwclk           = amiga_hwclk;
   mach_set_clock_mmss  = amiga_set_clock_mmss;
-#ifdef CONFIG_AMIGA_FLOPPY
-  mach_floppy_setup    = amiga_floppy_setup;
-#endif