Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Ben Herrenschmidt:
 "Here is the bulk of the powerpc changes for this merge window.  It got
  a bit delayed in part because I wasn't paying attention, and in part
  because I discovered I had a core PCI change without a PCI maintainer
  ack in it.  Bjorn eventually agreed it was ok to merge it though we'll
  probably improve it later and I didn't want to rebase to add his ack.

  There is going to be a bit more next week, essentially fixes that I
  still want to sort through and test.

  The biggest item this time is the support to build the ppc64 LE kernel
  with our new v2 ABI.  We previously supported v2 userspace but the
  kernel itself was a tougher nut to crack.  This is now sorted mostly
  thanks to Anton and Rusty.

  We also have a fairly big series from Cedric that add support for
  64-bit LE zImage boot wrapper.  This was made harder by the fact that
  traditionally our zImage wrapper was always 32-bit, but our new LE
  toolchains don't really support 32-bit anymore (it's somewhat there
  but not really "supported") so we didn't want to rely on it.  This
  meant more churn that just endian fixes.

  This brings some more LE bits as well, such as the ability to run in
  LE mode without a hypervisor (ie. under OPAL firmware) by doing the
  right OPAL call to reinitialize the CPU to take HV interrupts in the
  right mode and the usual pile of endian fixes.

  There's another series from Gavin adding EEH improvements (one day we
  *will* have a release with less than 20 EEH patches, I promise!).

  Another highlight is the support for the "Split core" functionality on
  P8 by Michael.  This allows a P8 core to be split into "sub cores" of
  4 threads which allows the subcores to run different guests under KVM
  (the HW still doesn't support a partition per thread).

  And then the usual misc bits and fixes ..."

[ Further delayed by gmail deciding that BenH is a dirty spammer.
  Google knows.  ]

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits)
  powerpc/powernv: Add missing include to LPC code
  selftests/powerpc: Test the THP bug we fixed in the previous commit
  powerpc/mm: Check paca psize is up to date for huge mappings
  powerpc/powernv: Pass buffer size to OPAL validate flash call
  powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC()
  powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC()
  powerpc/powernv: Set memory_block_size_bytes to 256MB
  powerpc: Allow ppc_md platform hook to override memory_block_size_bytes
  powerpc/powernv: Fix endian issues in memory error handling code
  powerpc/eeh: Skip eeh sysfs when eeh is disabled
  powerpc: 64bit sendfile is capped at 2GB
  powerpc/powernv: Provide debugfs access to the LPC bus via OPAL
  powerpc/serial: Use saner flags when creating legacy ports
  powerpc: Add cpu family documentation
  powerpc/xmon: Fix up xmon format strings
  powerpc/powernv: Add calls to support little endian host
  powerpc: Document sysfs DSCR interface
  powerpc: Fix regression of per-CPU DSCR setting
  powerpc: Split __SYSFS_SPRSETUP macro
  arch: powerpc/fadump: Cleaning up inconsistent NULL checks
  ...

39 files changed, 1410 insertions, 349 deletions

diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index dc1a264ec6e..4d88f6a1905 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -199,6 +199,34 @@ config CURRITUCK
 	help
 	  This option enables support for the IBM Currituck (476fpe) evaluation board
 
+config AKEBONO
+	bool "IBM Akebono (476gtr) Support"
+	depends on PPC_47x
+	default n
+	select SWIOTLB
+	select 476FPE
+	select PPC4xx_PCI_EXPRESS
+	select PCI_MSI
+	select PPC4xx_HSTA_MSI
+	select I2C
+	select I2C_IBM_IIC
+	select NETDEVICES
+	select ETHERNET
+	select NET_VENDOR_IBM
+	select IBM_EMAC_EMAC4
+	select IBM_EMAC_RGMII_WOL
+	select USB
+	select USB_OHCI_HCD_PLATFORM
+	select USB_EHCI_HCD_PLATFORM
+	select MMC_SDHCI
+	select MMC_SDHCI_PLTFM
+	select MMC_SDHCI_OF_476GTR
+	select ATA
+	select SATA_AHCI_PLATFORM
+	help
+	  This option enables support for the IBM Akebono (476gtr) evaluation board
+
+
 config ICON
 	bool "Icon"
 	depends on 44x
@@ -323,6 +351,20 @@ config APM821xx
 	select IBM_EMAC_EMAC4
 	select IBM_EMAC_TAH
 
+config 476FPE_ERR46
+	depends on 476FPE
+	bool "Enable linker work around for PPC476FPE errata #46"
+	help
+	  This option enables a work around for an icache bug on 476
+	  that can cause execution of stale instructions when falling
+	  through pages (IBM errata #46). It requires a recent version
+	  of binutils which supports the --ppc476-workaround option.
+
+	  The work around enables the appropriate linker options and
+	  ensures that all module output sections are aligned to 4K
+	  page boundaries. The work around is only required when
+	  building modules.
+
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
 	bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index d03833abec0..26d35b5941f 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
 obj-$(CONFIG_XILINX_ML510) += virtex_ml510.o
 obj-$(CONFIG_ISS4xx)	+= iss4xx.o
 obj-$(CONFIG_CANYONLANDS)+= canyonlands.o
-obj-$(CONFIG_CURRITUCK)	+= currituck.o
+obj-$(CONFIG_CURRITUCK)	+= ppc476.o
+obj-$(CONFIG_AKEBONO)	+= ppc476.o
diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/ppc476.c
index 7f1b71a01c6..33986c1a05d 100644
--- a/arch/powerpc/platforms/44x/currituck.c
+++ b/arch/powerpc/platforms/44x/ppc476.c
@@ -1,7 +1,8 @@
 /*
- * Currituck board specific routines
+ * PowerPC 476FPE board specific routines
  *
- * Copyright © 2011 Tony Breeds IBM Corporation
+ * Copyright © 2013 Tony Breeds IBM Corporation
+ * Copyright © 2013 Alistair Popple IBM Corporation
  *
  * Based on earlier code:
  *    Matt Porter <mporter@kernel.crashing.org>
@@ -35,8 +36,9 @@
 #include <asm/mmu.h>
 
 #include <linux/pci.h>
+#include <linux/i2c.h>
 
-static __initdata struct of_device_id ppc47x_of_bus[] = {
+static struct of_device_id ppc47x_of_bus[] __initdata = {
 	{ .compatible = "ibm,plb4", },
 	{ .compatible = "ibm,plb6", },
 	{ .compatible = "ibm,opb", },
@@ -55,15 +57,69 @@ static void quirk_ppc_currituck_usb_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(0x1033, 0x0035, quirk_ppc_currituck_usb_fixup);
 
+/* Akebono has an AVR microcontroller attached to the I2C bus
+ * which is used to power off/reset the system. */
+
+/* AVR I2C Commands */
+#define AVR_PWRCTL_CMD (0x26)
+
+/* Flags for the power control I2C commands */
+#define AVR_PWRCTL_PWROFF (0x01)
+#define AVR_PWRCTL_RESET (0x02)
+
+static struct i2c_client *avr_i2c_client;
+static void avr_halt_system(int pwrctl_flags)
+{
+	/* Request the AVR to reset the system */
+	i2c_smbus_write_byte_data(avr_i2c_client,
+				  AVR_PWRCTL_CMD, pwrctl_flags);
+
+	/* Wait for system to be reset */
+	while (1)
+		;
+}
+
+static void avr_power_off_system(void)
+{
+	avr_halt_system(AVR_PWRCTL_PWROFF);
+}
+
+static void avr_reset_system(char *cmd)
+{
+	avr_halt_system(AVR_PWRCTL_RESET);
+}
+
+static int avr_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	avr_i2c_client = client;
+	ppc_md.restart = avr_reset_system;
+	ppc_md.power_off = avr_power_off_system;
+	return 0;
+}
+
+static const struct i2c_device_id avr_id[] = {
+	{ "akebono-avr", 0 },
+	{ }
+};
+
+static struct i2c_driver avr_driver = {
+	.driver = {
+		.name = "akebono-avr",
+	},
+	.probe = avr_probe,
+	.id_table = avr_id,
+};
+
 static int __init ppc47x_device_probe(void)
 {
+	i2c_add_driver(&avr_driver);
 	of_platform_bus_probe(NULL, ppc47x_of_bus, NULL);
 
 	return 0;
 }
 machine_device_initcall(ppc47x, ppc47x_device_probe);
 
-/* We can have either UICs or MPICs */
 static void __init ppc47x_init_irq(void)
 {
 	struct device_node *np;
@@ -157,43 +213,36 @@ static void __init ppc47x_setup_arch(void)
 {
 
 	/* No need to check the DMA config as we /know/ our windows are all of
- 	 * RAM.  Lets hope that doesn't change */
+	 * RAM.  Lets hope that doesn't change */
 	swiotlb_detect_4g();
 
 	ppc47x_smp_init();
 }
 
-/*
- * Called very early, MMU is off, device-tree isn't unflattened
- */
-static int __init ppc47x_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	if (!of_flat_dt_is_compatible(root, "ibm,currituck"))
-		return 0;
-
-	return 1;
-}
-
 static int board_rev = -1;
 static int __init ppc47x_get_board_rev(void)
 {
-	u8 fpga_reg0;
-	void *fpga;
-	struct device_node *np;
+	int reg;
+	u8 *fpga;
+	struct device_node *np = NULL;
+
+	if (of_machine_is_compatible("ibm,currituck")) {
+		np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
+		reg = 0;
+	} else if (of_machine_is_compatible("ibm,akebono")) {
+		np = of_find_compatible_node(NULL, NULL, "ibm,akebono-fpga");
+		reg = 2;
+	}
 
-	np = of_find_compatible_node(NULL, NULL, "ibm,currituck-fpga");
 	if (!np)
 		goto fail;
 
-	fpga = of_iomap(np, 0);
+	fpga = (u8 *) of_iomap(np, 0);
 	of_node_put(np);
 	if (!fpga)
 		goto fail;
 
-	fpga_reg0 = ioread8(fpga);
-	board_rev = fpga_reg0 & 0x03;
+	board_rev = ioread8(fpga + reg) & 0x03;
 	pr_info("%s: Found board revision %d\n", __func__, board_rev);
 	iounmap(fpga);
 	return 0;
@@ -208,7 +257,7 @@ machine_arch_initcall(ppc47x, ppc47x_get_board_rev);
 static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
 {
 	if (dev->vendor == 0x1033 && (dev->device == 0x0035 ||
-	                              dev->device == 0x00e0)) {
+				      dev->device == 0x00e0)) {
 		if (board_rev == 0) {
 			dev->irq = irq_create_mapping(NULL, 47);
 			pr_info("%s: Mapping irq %d\n", __func__, dev->irq);
@@ -221,13 +270,30 @@ static void ppc47x_pci_irq_fixup(struct pci_dev *dev)
 	}
 }
 
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init ppc47x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "ibm,akebono"))
+		return 1;
+
+	if (of_flat_dt_is_compatible(root, "ibm,currituck")) {
+		ppc_md.pci_irq_fixup = ppc47x_pci_irq_fixup;
+		return 1;
+	}
+
+	return 0;
+}
+
 define_machine(ppc47x) {
 	.name			= "PowerPC 47x",
 	.probe			= ppc47x_probe,
 	.progress		= udbg_progress,
 	.init_IRQ		= ppc47x_init_irq,
 	.setup_arch		= ppc47x_setup_arch,
-	.pci_irq_fixup		= ppc47x_pci_irq_fixup,
 	.restart		= ppc4xx_reset_system,
 	.calibrate_decr		= generic_calibrate_decr,
 };
diff --git a/arch/powerpc/platforms/44x/ppc476_modules.lds b/arch/powerpc/platforms/44x/ppc476_modules.lds
new file mode 100644
index 00000000000..9fec5d34ba8
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc476_modules.lds
@@ -0,0 +1,15 @@
+SECTIONS
+{
+	.text : ALIGN(4096)
+	{
+		*(.text .text.* .fixup)
+	}
+	.init.text : ALIGN(4096)
+	{
+		*(.init.text .init.text.*)
+	}
+	.exit.text : ALIGN(4096)
+	{
+		*(.exit.text .exit.text.*)
+	}
+}
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index c17aae80e7f..f442120e003 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -38,6 +38,15 @@ config C293_PCIE
 	  help
 	  This option enables support for the C293PCIE board
 
+config BSC9132_QDS
+	bool "Freescale BSC9132QDS"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Freescale BSC9132 QDS board.
+	  BSC9132 is a heterogeneous SoC containing dual e500v2 powerpc cores
+	  and dual StarCore SC3850 DSP cores.
+	  Manufacturer : Freescale Semiconductor, Inc
+
 config MPC8540_ADS
 	bool "Freescale MPC8540 ADS"
 	select DEFAULT_UIMAGE
@@ -117,11 +126,11 @@ config P1022_RDK
 	  This option enables support for the Freescale / iVeia P1022RDK
 	  reference board.
 
-config P1023_RDS
-	bool "Freescale P1023 RDS/RDB"
+config P1023_RDB
+	bool "Freescale P1023 RDB"
 	select DEFAULT_UIMAGE
 	help
-	  This option enables support for the P1023 RDS and RDB boards
+	  This option enables support for the P1023 RDB board.
 
 config TWR_P102x
 	bool "Freescale TWR-P102x"
@@ -263,11 +272,11 @@ config CORENET_GENERIC
 	help
 	  This option enables support for the FSL CoreNet based boards.
 	  For 32bit kernel, the following boards are supported:
-	    P2041 RDB, P3041 DS and P4080 DS
+	    P2041 RDB, P3041 DS, P4080 DS, kmcoge4, and OCA4080
 	  For 64bit kernel, the following boards are supported:
 	    T4240 QDS and B4 QDS
 	  The following boards are supported for both 32bit and 64bit kernel:
-	    P5020 DS and P5040 DS
+	    P5020 DS, P5040 DS and T104xQDS
 
 endif # FSL_SOC_BOOKE
 
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 25cebe74ac4..73032604662 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -6,6 +6,7 @@ obj-$(CONFIG_SMP) += smp.o
 obj-y += common.o
 
 obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
+obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
 obj-$(CONFIG_C293_PCIE)   += c293pcie.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
@@ -17,7 +18,7 @@ obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
 obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
-obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
+obj-$(CONFIG_P1023_RDB)   += p1023_rdb.o
 obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
 obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/bsc913x_qds.c b/arch/powerpc/platforms/85xx/bsc913x_qds.c
new file mode 100644
index 00000000000..f0927e58af2
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/bsc913x_qds.c
@@ -0,0 +1,74 @@
+/*
+ * BSC913xQDS Board Setup
+ *
+ * Author:
+ *   Harninder Rai <harninder.rai@freescale.com>
+ *   Priyanka Jain <Priyanka.Jain@freescale.com>
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <asm/mpic.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/udbg.h>
+
+#include "mpc85xx.h"
+#include "smp.h"
+
+void __init bsc913x_qds_pic_init(void)
+{
+	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+	  MPIC_SINGLE_DEST_CPU,
+	  0, 256, " OpenPIC  ");
+
+	if (!mpic)
+		pr_err("bsc913x: Failed to allocate MPIC structure\n");
+	else
+		mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init bsc913x_qds_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("bsc913x_qds_setup_arch()", 0);
+
+#if defined(CONFIG_SMP)
+	mpc85xx_smp_init();
+#endif
+
+	pr_info("bsc913x board from Freescale Semiconductor\n");
+}
+
+machine_device_initcall(bsc9132_qds, mpc85xx_common_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+
+static int __init bsc9132_qds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,bsc9132qds");
+}
+
+define_machine(bsc9132_qds) {
+	.name			= "BSC9132 QDS",
+	.probe			= bsc9132_qds_probe,
+	.setup_arch		= bsc913x_qds_setup_arch,
+	.init_IRQ		= bsc913x_qds_pic_init,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 8e4b1e1a491..5db1e117fdd 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -67,7 +67,7 @@ void __init corenet_gen_setup_arch(void)
 
 	swiotlb_detect_4g();
 
-	pr_info("%s board from Freescale Semiconductor\n", ppc_md.name);
+	pr_info("%s board\n", ppc_md.name);
 
 	mpc85xx_qe_init();
 }
@@ -115,6 +115,7 @@ int __init corenet_gen_publish_devices(void)
 static const char * const boards[] __initconst = {
 	"fsl,P2041RDB",
 	"fsl,P3041DS",
+	"fsl,OCA4080",
 	"fsl,P4080DS",
 	"fsl,P5020DS",
 	"fsl,P5040DS",
@@ -122,12 +123,16 @@ static const char * const boards[] __initconst = {
 	"fsl,B4860QDS",
 	"fsl,B4420QDS",
 	"fsl,B4220QDS",
+	"fsl,T1040QDS",
+	"fsl,T1042QDS",
+	"keymile,kmcoge4",
 	NULL
 };
 
 static const char * const hv_boards[] __initconst = {
 	"fsl,P2041RDB-hv",
 	"fsl,P3041DS-hv",
+	"fsl,OCA4080-hv",
 	"fsl,P4080DS-hv",
 	"fsl,P5020DS-hv",
 	"fsl,P5040DS-hv",
@@ -135,6 +140,8 @@ static const char * const hv_boards[] __initconst = {
 	"fsl,B4860QDS-hv",
 	"fsl,B4420QDS-hv",
 	"fsl,B4220QDS-hv",
+	"fsl,T1040QDS-hv",
+	"fsl,T1042QDS-hv",
 	NULL
 };
 
diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rdb.c
index 0e614007acf..d5b7509825d 100644
--- a/arch/powerpc/platforms/85xx/p1023_rds.c
+++ b/arch/powerpc/platforms/85xx/p1023_rdb.c
@@ -4,7 +4,7 @@
  * Author: Roy Zang <tie-fei.zang@freescale.com>
  *
  * Description:
- * P1023 RDS Board Setup
+ * P1023 RDB Board Setup
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -41,12 +41,12 @@
  * Setup the architecture
  *
  */
-static void __init mpc85xx_rds_setup_arch(void)
+static void __init mpc85xx_rdb_setup_arch(void)
 {
 	struct device_node *np;
 
 	if (ppc_md.progress)
-		ppc_md.progress("p1023_rds_setup_arch()", 0);
+		ppc_md.progress("p1023_rdb_setup_arch()", 0);
 
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
@@ -85,10 +85,9 @@ static void __init mpc85xx_rds_setup_arch(void)
 	fsl_pci_assign_primary();
 }
 
-machine_arch_initcall(p1023_rds, mpc85xx_common_publish_devices);
 machine_arch_initcall(p1023_rdb, mpc85xx_common_publish_devices);
 
-static void __init mpc85xx_rds_pic_init(void)
+static void __init mpc85xx_rdb_pic_init(void)
 {
 	struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
 		MPIC_SINGLE_DEST_CPU,
@@ -99,14 +98,6 @@ static void __init mpc85xx_rds_pic_init(void)
 	mpic_init(mpic);
 }
 
-static int __init p1023_rds_probe(void)
-{
-	unsigned long root = of_get_flat_dt_root();
-
-	return of_flat_dt_is_compatible(root, "fsl,P1023RDS");
-
-}
-
 static int __init p1023_rdb_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
@@ -115,26 +106,11 @@ static int __init p1023_rdb_probe(void)
 
 }
 
-define_machine(p1023_rds) {
-	.name			= "P1023 RDS",
-	.probe			= p1023_rds_probe,
-	.setup_arch		= mpc85xx_rds_setup_arch,
-	.init_IRQ		= mpc85xx_rds_pic_init,
-	.get_irq		= mpic_get_irq,
-	.restart		= fsl_rstcr_restart,
-	.calibrate_decr		= generic_calibrate_decr,
-	.progress		= udbg_progress,
-#ifdef CONFIG_PCI
-	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
-	.pcibios_fixup_phb      = fsl_pcibios_fixup_phb,
-#endif
-};
-
 define_machine(p1023_rdb) {
 	.name			= "P1023 RDB",
 	.probe			= p1023_rdb_probe,
-	.setup_arch		= mpc85xx_rds_setup_arch,
-	.init_IRQ		= mpc85xx_rds_pic_init,
+	.setup_arch		= mpc85xx_rdb_setup_arch,
+	.init_IRQ		= mpc85xx_rdb_pic_init,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 6382098d6f8..ba093f55367 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -27,6 +27,7 @@
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
 #include <asm/fsl_guts.h>
+#include <asm/code-patching.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
@@ -267,7 +268,7 @@ out:
 	flush_spin_table(spin_table);
 	out_be32(&spin_table->pir, hw_cpu);
 	out_be64((u64 *)(&spin_table->addr_h),
-	  __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
+		__pa(ppc_function_entry(generic_secondary_smp_init)));
 	flush_spin_table(spin_table);
 #endif
 
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index d9e2b19b7c8..43b65ad1970 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -422,6 +422,7 @@ config CPU_BIG_ENDIAN
 
 config CPU_LITTLE_ENDIAN
 	bool "Build little endian kernel"
+	select PPC64_BOOT_WRAPPER
 	help
 	  Build a little endian kernel.
 
@@ -430,3 +431,7 @@ config CPU_LITTLE_ENDIAN
 	  little endian powerpc.
 
 endchoice
+
+config PPC64_BOOT_WRAPPER
+	def_bool n
+	depends on CPU_LITTLE_ENDIAN
diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c
index 90745eaa45f..c8017a7bcab 100644
--- a/arch/powerpc/platforms/cell/smp.c
+++ b/arch/powerpc/platforms/cell/smp.c
@@ -40,6 +40,7 @@
 #include <asm/firmware.h>
 #include <asm/rtas.h>
 #include <asm/cputhreads.h>
+#include <asm/code-patching.h>
 
 #include "interrupt.h"
 #include <asm/udbg.h>
@@ -70,8 +71,8 @@ static cpumask_t of_spin_map;
 static inline int smp_startup_cpu(unsigned int lcpu)
 {
 	int status;
-	unsigned long start_here = __pa((u32)*((unsigned long *)
-					       generic_secondary_smp_init));
+	unsigned long start_here =
+			__pa(ppc_function_entry(generic_secondary_smp_init));
 	unsigned int pcpu;
 	int start_cpu;
 
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 2a7024d8d8b..a25f496c2ef 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -65,6 +65,7 @@ config MVME5100
 	select PPC_INDIRECT_PCI
 	select PPC_I8259
 	select PPC_NATIVE
+	select PPC_UDBG_16550
 	help
 	  This option enables support for the Motorola (now Emerson) MVME5100
 	  board.
diff --git a/arch/powerpc/platforms/pasemi/powersave.S b/arch/powerpc/platforms/pasemi/powersave.S
index 56f45adcd08..81ab555aa49 100644
--- a/arch/powerpc/platforms/pasemi/powersave.S
+++ b/arch/powerpc/platforms/pasemi/powersave.S
@@ -66,7 +66,7 @@ sleep_common:
 	std	r3, 48(r1)
 
 	/* Only do power savings when in astate 0 */
-	bl	.check_astate
+	bl	check_astate
 	cmpwi	r3,0
 	bne	1f
 
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 63cebb9b4d4..4ad0d345bc9 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,7 +1,7 @@
 obj-y			+= setup.o opal-takeover.o opal-wrappers.o opal.o opal-async.o
 obj-y			+= opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
 obj-y			+= rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
-obj-y			+= opal-msglog.o
+obj-y			+= opal-msglog.o subcore.o subcore-asm.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 obj-$(CONFIG_PCI)	+= pci.o pci-p5ioc2.o pci-ioda.o
diff --git a/arch/powerpc/platforms/powernv/eeh-ioda.c b/arch/powerpc/platforms/powernv/eeh-ioda.c
index 5b51079f3e3..753f08e36df 100644
--- a/arch/powerpc/platforms/powernv/eeh-ioda.c
+++ b/arch/powerpc/platforms/powernv/eeh-ioda.c
@@ -42,11 +42,19 @@ static int ioda_eeh_event(struct notifier_block *nb,
 {
 	uint64_t changed_evts = (uint64_t)change;
 
-	/* We simply send special EEH event */
-	if ((changed_evts & OPAL_EVENT_PCI_ERROR) &&
-	    (events & OPAL_EVENT_PCI_ERROR) &&
-	    eeh_enabled())
+	/*
+	 * We simply send special EEH event if EEH has
+	 * been enabled, or clear pending events in
+	 * case that we enable EEH soon
+	 */
+	if (!(changed_evts & OPAL_EVENT_PCI_ERROR) ||
+	    !(events & OPAL_EVENT_PCI_ERROR))
+		return 0;
+
+	if (eeh_enabled())
 		eeh_send_failure_event(NULL);
+	else
+		opal_notifier_update_evt(OPAL_EVENT_PCI_ERROR, 0x0ul);
 
 	return 0;
 }
@@ -141,7 +149,9 @@ static int ioda_eeh_post_init(struct pci_controller *hose)
 	}
 
 #ifdef CONFIG_DEBUG_FS
-	if (phb->dbgfs) {
+	if (!phb->has_dbgfs && phb->dbgfs) {
+		phb->has_dbgfs = 1;
+