powerpc/powernv: Return secondary CPUs to firmware before FW update

Firmware update on PowerNV platform takes several minutes. During
this time one CPU is stuck in FW and the kernel complains about "soft
lockups".

This patch returns all secondary CPUs to firmware before starting
firmware update process.

[ Reworked a bit and cleaned up -- BenH ]

Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

2 files changed, 65 insertions, 7 deletions

diff --git a/arch/powerpc/platforms/powernv/opal-flash.c b/arch/powerpc/platforms/powernv/opal-flash.c
index dc487ff0470..145a80bc535 100644
--- a/arch/powerpc/platforms/powernv/opal-flash.c
+++ b/arch/powerpc/platforms/powernv/opal-flash.c
@@ -20,6 +20,7 @@
 #include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/pagemap.h>
+#include <linux/delay.h>
 
 #include <asm/opal.h>
 
@@ -290,11 +291,6 @@ static int opal_flash_update(int op)
 	/* First entry address */
 	addr = __pa(list);
 
-	pr_alert("FLASH: Image is %u bytes\n", image_data.size);
-	pr_alert("FLASH: Image update requested\n");
-	pr_alert("FLASH: Image will be updated during system reboot\n");
-	pr_alert("FLASH: This will take several minutes. Do not power off!\n");
-
 flash:
 	rc = opal_update_flash(addr);
 
@@ -302,6 +298,47 @@ invalid_img:
 	return rc;
 }
 
+/* Return CPUs to OPAL before starting FW update */
+static void flash_return_cpu(void *info)
+{
+	int cpu = smp_processor_id();
+
+	if (!cpu_online(cpu))
+		return;
+
+	/* Disable IRQ */
+	hard_irq_disable();
+
+	/* Return the CPU to OPAL */
+	opal_return_cpu();
+}
+
+/* This gets called just before system reboots */
+void opal_flash_term_callback(void)
+{
+	struct cpumask mask;
+
+	if (update_flash_data.status != FLASH_IMG_READY)
+		return;
+
+	pr_alert("FLASH: Flashing new firmware\n");
+	pr_alert("FLASH: Image is %u bytes\n", image_data.size);
+	pr_alert("FLASH: Performing flash and reboot/shutdown\n");
+	pr_alert("FLASH: This will take several minutes. Do not power off!\n");
+
+	/* Small delay to help getting the above message out */
+	msleep(500);
+
+	/* Return secondary CPUs to firmware */
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	if (!cpumask_empty(&mask))
+		smp_call_function_many(&mask,
+				       flash_return_cpu, NULL, false);
+	/* Hard disable interrupts */
+	hard_irq_disable();
+}
+
 /*
  * Show candidate image status
  */
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 8723d32632f..05d63aaeb14 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -98,11 +98,32 @@ static void pnv_show_cpuinfo(struct seq_file *m)
 	of_node_put(root);
 }
 
+static void pnv_prepare_going_down(void)
+{
+	/*
+	 * Disable all notifiers from OPAL, we can't
+	 * service interrupts anymore anyway
+	 */
+	opal_notifier_disable();
+
+	/* Soft disable interrupts */
+	local_irq_disable();
+
+	/*
+	 * Return secondary CPUs to firwmare if a flash update
+	 * is pending otherwise we will get all sort of error
+	 * messages about CPU being stuck etc.. This will also
+	 * have the side effect of hard disabling interrupts so
+	 * past this point, the kernel is effectively dead.
+	 */
+	opal_flash_term_callback();
+}
+
 static void  __noreturn pnv_restart(char *cmd)
 {
 	long rc = OPAL_BUSY;
 
-	opal_notifier_disable();
+	pnv_prepare_going_down();
 
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_cec_reboot();
@@ -119,7 +140,7 @@ static void __noreturn pnv_power_off(void)
 {
 	long rc = OPAL_BUSY;
 
-	opal_notifier_disable();
+	pnv_prepare_going_down();
 
 	while (rc == OPAL_BUSY || rc == OPAL_BUSY_EVENT) {
 		rc = opal_cec_power_down(0);