ARM: EXYNOS: Remove unused board files

Since commit 383ffda ARM: EXYNOS: no more support non-DT for EXYNOS SoCs
all non-DT Exynos board files are not used anymore. This patch removes
them.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

6 files changed, 0 insertions, 4417 deletions

diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
deleted file mode 100644
index 5f0f5570137..00000000000
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/sdhci.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ARMLEX4210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define ARMLEX4210_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define ARMLEX4210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= ARMLEX4210_UCON_DEFAULT,
-		.ulcon		= ARMLEX4210_ULCON_DEFAULT,
-		.ufcon		= ARMLEX4210_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= ARMLEX4210_UCON_DEFAULT,
-		.ulcon		= ARMLEX4210_ULCON_DEFAULT,
-		.ufcon		= ARMLEX4210_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= ARMLEX4210_UCON_DEFAULT,
-		.ulcon		= ARMLEX4210_ULCON_DEFAULT,
-		.ufcon		= ARMLEX4210_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= ARMLEX4210_UCON_DEFAULT,
-		.ulcon		= ARMLEX4210_ULCON_DEFAULT,
-		.ufcon		= ARMLEX4210_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPX2(5),
-	.ext_cd_gpio_invert	= 1,
-	.max_width		= 4,
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-	.max_width		= 4,
-};
-
-static void __init armlex4210_sdhci_init(void)
-{
-	s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
-	s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
-}
-
-static void __init armlex4210_wlan_init(void)
-{
-	/* enable */
-	s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
-
-	/* reset */
-	s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
-
-	/* wakeup */
-	s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
-}
-
-static struct resource armlex4210_smsc911x_resources[] = {
-	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K),
-	[1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \
-					| IRQF_TRIGGER_HIGH),
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device armlex4210_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(armlex4210_smsc911x_resources),
-	.resource	= armlex4210_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static struct platform_device *armlex4210_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&armlex4210_smsc911x,
-	&exynos4_device_ahci,
-};
-
-static void __init armlex4210_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-static void __init armlex4210_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_uarts(armlex4210_uartcfgs,
-			   ARRAY_SIZE(armlex4210_uartcfgs));
-}
-
-static void __init armlex4210_machine_init(void)
-{
-	armlex4210_smsc911x_init();
-
-	armlex4210_sdhci_init();
-
-	armlex4210_wlan_init();
-
-	platform_add_devices(armlex4210_devices,
-			     ARRAY_SIZE(armlex4210_devices));
-}
-
-MACHINE_START(ARMLEX4210, "ARMLEX4210")
-	/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= armlex4210_map_io,
-	.init_machine	= armlex4210_machine_init,
-	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
deleted file mode 100644
index 5c8b2878dbb..00000000000
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ /dev/null
@@ -1,1388 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/mach-nuri.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/i2c-gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/power/max8903_charger.h>
-#include <linux/power/max17042_battery.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mfd/max8997-private.h>
-#include <linux/mmc/host.h>
-#include <linux/fb.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mipi-csis.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <drm/exynos_drm.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-#include <media/s5p_fimc.h>
-#include <media/v4l2-mediabus.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/adc.h>
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/mfc.h>
-#include <plat/fimc-core.h>
-#include <plat/camport.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define NURI_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define NURI_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG256 |	\
-				 S5PV210_UFCON_RXTRIG256)
-
-enum fixed_regulator_id {
-	FIXED_REG_ID_MMC = 0,
-	FIXED_REG_ID_MAX8903,
-	FIXED_REG_ID_CAM_A28V,
-	FIXED_REG_ID_CAM_12V,
-	FIXED_REG_ID_CAM_VT_15V,
-};
-
-static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
-	{
-		.hwport		= 0,
-		.ucon		= NURI_UCON_DEFAULT,
-		.ulcon		= NURI_ULCON_DEFAULT,
-		.ufcon		= NURI_UFCON_DEFAULT,
-	},
-	{
-		.hwport		= 1,
-		.ucon		= NURI_UCON_DEFAULT,
-		.ulcon		= NURI_ULCON_DEFAULT,
-		.ufcon		= NURI_UFCON_DEFAULT,
-	},
-	{
-		.hwport		= 2,
-		.ucon		= NURI_UCON_DEFAULT,
-		.ulcon		= NURI_ULCON_DEFAULT,
-		.ufcon		= NURI_UFCON_DEFAULT,
-	},
-	{
-		.hwport		= 3,
-		.ucon		= NURI_UCON_DEFAULT,
-		.ulcon		= NURI_ULCON_DEFAULT,
-		.ufcon		= NURI_UFCON_DEFAULT,
-	},
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
-	.max_width		= 8,
-	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-				MMC_CAP_ERASE),
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct regulator_consumer_supply emmc_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
-	REGULATOR_SUPPLY("vmmc", "dw_mmc"),
-};
-
-static struct regulator_init_data emmc_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "VMEM_VDD_2.8V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(emmc_supplies),
-	.consumer_supplies	= emmc_supplies,
-};
-
-static struct fixed_voltage_config emmc_fixed_voltage_config = {
-	.supply_name		= "MASSMEMORY_EN (inverted)",
-	.microvolts		= 2800000,
-	.gpio			= EXYNOS4_GPL1(1),
-	.enable_high		= false,
-	.init_data		= &emmc_fixed_voltage_init_data,
-};
-
-static struct platform_device emmc_fixed_voltage = {
-	.name			= "reg-fixed-voltage",
-	.id			= FIXED_REG_ID_MMC,
-	.dev			= {
-		.platform_data	= &emmc_fixed_voltage_config,
-	},
-};
-
-/* SD */
-static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.ext_cd_gpio		= EXYNOS4_GPX3(3),	/* XEINT_27 */
-	.ext_cd_gpio_invert	= 1,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-};
-
-/* WLAN */
-static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init nuri_sdhci_init(void)
-{
-	s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
-	s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
-	s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
-}
-
-/* GPIO KEYS */
-static struct gpio_keys_button nuri_gpio_keys_tables[] = {
-	{
-		.code			= KEY_VOLUMEUP,
-		.gpio			= EXYNOS4_GPX2(0),	/* XEINT16 */
-		.desc			= "gpio-keys: KEY_VOLUMEUP",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_VOLUMEDOWN,
-		.gpio			= EXYNOS4_GPX2(1),	/* XEINT17 */
-		.desc			= "gpio-keys: KEY_VOLUMEDOWN",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_POWER,
-		.gpio			= EXYNOS4_GPX2(7),	/* XEINT23 */
-		.desc			= "gpio-keys: KEY_POWER",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data nuri_gpio_keys_data = {
-	.buttons		= nuri_gpio_keys_tables,
-	.nbuttons		= ARRAY_SIZE(nuri_gpio_keys_tables),
-};
-
-static struct platform_device nuri_gpio_keys = {
-	.name			= "gpio-keys",
-	.dev			= {
-		.platform_data	= &nuri_gpio_keys_data,
-	},
-};
-
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel = {
-		.timing	= {
-			.xres		= 1024,
-			.yres		= 600,
-			.hsync_len	= 40,
-			.left_margin	= 79,
-			.right_margin	= 200,
-			.vsync_len	= 10,
-			.upper_margin	= 10,
-			.lower_margin	= 11,
-			.refresh	= 60,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.default_win	= 3,
-	.bpp		= 32,
-};
-
-#else
-/* Frame Buffer */
-static struct s3c_fb_pd_win nuri_fb_win0 = {
-	.max_bpp	= 24,
-	.default_bpp	= 16,
-	.xres		= 1024,
-	.yres		= 600,
-	.virtual_x	= 1024,
-	.virtual_y	= 2 * 600,
-};
-
-static struct fb_videomode nuri_lcd_timing = {
-	.left_margin	= 64,
-	.right_margin	= 16,
-	.upper_margin	= 64,
-	.lower_margin	= 1,
-	.hsync_len	= 48,
-	.vsync_len	= 3,
-	.xres		= 1024,
-	.yres		= 600,
-	.refresh	= 60,
-};
-
-static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
-	.win[0]		= &nuri_fb_win0,
-	.vtiming	= &nuri_lcd_timing,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
-{
-	int gpio = EXYNOS4_GPE1(5);
-
-	gpio_request(gpio, "LVDS_nSHDN");
-	gpio_direction_output(gpio, power);
-	gpio_free(gpio);
-}
-
-static int nuri_bl_init(struct device *dev)
-{
-	return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
-				"LCD_LD0_EN");
-}
-
-static int nuri_bl_notify(struct device *dev, int brightness)
-{
-	if (brightness < 1)
-		brightness = 0;
-
-	gpio_set_value(EXYNOS4_GPE2(3), 1);
-
-	return brightness;
-}
-
-static void nuri_bl_exit(struct device *dev)
-{
-	gpio_free(EXYNOS4_GPE2(3));
-}
-
-/* nuri pwm backlight */
-static struct platform_pwm_backlight_data nuri_backlight_data = {
-	.pwm_id			= 0,
-	.pwm_period_ns		= 30000,
-	.max_brightness		= 100,
-	.dft_brightness		= 50,
-	.init			= nuri_bl_init,
-	.notify			= nuri_bl_notify,
-	.exit			= nuri_bl_exit,
-};
-
-static struct platform_device nuri_backlight_device = {
-	.name			= "pwm-backlight",
-	.id			= -1,
-	.dev			= {
-		.parent		= &s3c_device_timer[0].dev,
-		.platform_data	= &nuri_backlight_data,
-	},
-};
-
-static struct plat_lcd_data nuri_lcd_platform_data = {
-	.set_power		= nuri_lcd_power_on,
-};
-
-static struct platform_device nuri_lcd_device = {
-	.name			= "platform-lcd",
-	.id			= -1,
-	.dev			= {
-		.platform_data	= &nuri_lcd_platform_data,
-	},
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
-	/* Gyro, To be updated */
-};
-
-/* TSP */
-static struct mxt_platform_data mxt_platform_data = {
-	.x_line			= 18,
-	.y_line			= 11,
-	.x_size			= 1024,
-	.y_size			= 600,
-	.blen			= 0x1,
-	.threshold		= 0x28,
-	.voltage		= 2800000,		/* 2.8V */
-	.orient			= MXT_DIAGONAL_COUNTER,
-	.irqflags		= IRQF_TRIGGER_FALLING,
-};
-
-static struct s3c2410_platform_i2c i2c3_data __initdata = {
-	.flags		= 0,
-	.bus_num	= 3,
-	.slave_addr	= 0x10,
-	.frequency	= 400 * 1000,
-	.sda_delay	= 100,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
-		.platform_data	= &mxt_platform_data,
-		.irq		= IRQ_EINT(4),
-	},
-};
-
-static void __init nuri_tsp_init(void)
-{
-	int gpio;
-
-	/* TOUCH_INT: XEINT_4 */
-	gpio = EXYNOS4_GPX0(4);
-	gpio_request(gpio, "TOUCH_INT");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-}
-
-static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
-	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
-	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
-	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
-	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
-	REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
-};
-static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
-	REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
-	REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
-	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */
-	REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
-	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
-	REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
-	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
-	REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
-};
-static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
-	REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
-	REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
-	REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
-	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
-	REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
-	REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
-	REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
-	REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
-	REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
-	REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
-};
-
-static struct regulator_consumer_supply __initdata max8997_charger_[] = {
-	REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
-};
-static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
-	REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
-};
-
-static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
-	REGULATOR_SUPPLY("gps_clk", "bcm4751"),
-	REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
-	REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
-	.constraints	= {
-		.name		= "VADC_3.3V_C210",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo1_),
-	.consumer_supplies	= max8997_ldo1_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data = {
-	.constraints	= {
-		.name		= "VALIVE_1.1V_C210",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
-	.constraints	= {
-		.name		= "VUSB_1.1V_C210",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo3_),
-	.consumer_supplies	= max8997_ldo3_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
-	.constraints	= {
-		.name		= "VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo4_),
-	.consumer_supplies	= max8997_ldo4_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo5_data = {
-	.constraints	= {
-		.name		= "VHSIC_1.2V_C210",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo5_),
-	.consumer_supplies	= max8997_ldo5_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
-	.constraints	= {
-		.name		= "VCC_1.8V_PDA",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(nuri_max8997_ldo6_consumer),
-	.consumer_supplies	= nuri_max8997_ldo6_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
-	.constraints	= {
-		.name		= "CAM_ISP_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo7_),
-	.consumer_supplies	= max8997_ldo7_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
-	.constraints	= {
-		.name		= "VUSB+VDAC_3.3V_C210",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo8_),
-	.consumer_supplies	= max8997_ldo8_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
-	.constraints	= {
-		.name		= "VCC_2.8V_PDA",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
-	.constraints	= {
-		.name		= "VPLL_1.1V_C210",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
-	.constraints	= {
-		.name		= "LVDS_VDD3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo11_),
-	.consumer_supplies	= max8997_ldo11_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo12_data = {
-	.constraints	= {
-		.name		= "VT_CAM_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo12_),
-	.consumer_supplies	= max8997_ldo12_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo13_data = {
-	.constraints	= {
-		.name		= "VTF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo13_),
-	.consumer_supplies	= max8997_ldo13_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
-	.constraints	= {
-		.name		= "VCC_3.0V_MOTOR",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo14_),
-	.consumer_supplies	= max8997_ldo14_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo15_data = {
-	.constraints	= {
-		.name		= "VTOUCH_ADVV2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo15_),
-	.consumer_supplies	= max8997_ldo15_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo16_data = {
-	.constraints	= {
-		.name		= "CAM_SENSOR_IO_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo16_),
-	.consumer_supplies	= max8997_ldo16_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo18_data = {
-	.constraints	= {
-		.name		= "VTOUCH_VDD2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_ldo18_),
-	.consumer_supplies	= max8997_ldo18_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
-	.constraints	= {
-		.name		= "VDDQ_M1M2_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
-	.constraints	= {
-		.name		= "VARM_1.2V_C210",
-		.min_uV		= 900000,
-		.max_uV		= 1350000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
-	.consumer_supplies = max8997_buck1_,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
-	.constraints	= {
-		.name		= "VINT_1.1V_C210",
-		.min_uV		= 900000,
-		.max_uV		= 1200000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
-	.consumer_supplies = max8997_buck2_,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
-	.constraints	= {
-		.name		= "VG3D_1.1V_C210",
-		.min_uV		= 900000,
-		.max_uV		= 1100000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
-	.consumer_supplies = max8997_buck3_,
-};
-
-static struct regulator_init_data __initdata max8997_buck4_data = {
-	.constraints	= {
-		.name		= "CAM_ISP_CORE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
-	.consumer_supplies = max8997_buck4_,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
-	.constraints	= {
-		.name		= "VMEM_1.2V_C210",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_buck6_data = {
-	.constraints	= {
-		.name		= "CAM_AF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
-	.consumer_supplies = max8997_buck6_,
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
-	.constraints	= {
-		.name		= "VCC_SUB_2.0V",
-		.min_uV		= 2000000,
-		.max_uV		= 2000000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_32khz_ap_data = {
-	.constraints	= {
-		.name		= "32KHz AP",
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
-	.consumer_supplies = max8997_32khz_ap_,
-};
-
-static struct regulator_init_data __initdata max8997_32khz_cp_data = {
-	.constraints	= {
-		.name		= "32KHz CP",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_vichg_data = {
-	.constraints	= {
-		.name		= "VICHG",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_esafeout1_data = {
-	.constraints	= {
-		.name		= "SAFEOUT1",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_esafeout1_),
-	.consumer_supplies	= max8997_esafeout1_,
-};
-
-static struct regulator_init_data __initdata max8997_esafeout2_data = {
-	.constraints	= {
-		.name		= "SAFEOUT2",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_esafeout2_),
-	.consumer_supplies	= max8997_esafeout2_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_cv_data = {
-	.constraints	= {
-		.name		= "CHARGER_CV",
-		.min_uV		= 4200000,
-		.max_uV		= 4200000,
-		.apply_uV	= 1,
-	},
-};
-
-static struct regulator_init_data __initdata max8997_charger_data = {
-	.constraints	= {
-		.name		= "CHARGER",
-		.min_uA		= 200000,
-		.max_uA		= 950000,
-		.boot_on	= 1,
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS |
-				REGULATOR_CHANGE_CURRENT,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_charger_),
-	.consumer_supplies	= max8997_charger_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_topoff_data = {
-	.constraints	= {
-		.name		= "CHARGER TOPOFF",
-		.min_uA		= 50000,
-		.max_uA		= 200000,
-		.valid_ops_mask = REGULATOR_CHANGE_CURRENT,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(max8997_chg_toff_),
-	.consumer_supplies	= max8997_chg_toff_,
-};
-
-static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
-	{ MAX8997_LDO1, &max8997_ldo1_data },
-	{ MAX8997_LDO2, &max8997_ldo2_data },
-	{ MAX8997_LDO3, &max8997_ldo3_data },
-	{ MAX8997_LDO4, &max8997_ldo4_data },
-	{ MAX8997_LDO5, &max8997_ldo5_data },
-	{ MAX8997_LDO6, &max8997_ldo6_data },
-	{ MAX8997_LDO7, &max8997_ldo7_data },
-	{ MAX8997_LDO8, &max8997_ldo8_data },
-	{ MAX8997_LDO9, &max8997_ldo9_data },
-	{ MAX8997_LDO10, &max8997_ldo10_data },
-	{ MAX8997_LDO11, &max8997_ldo11_data },
-	{ MAX8997_LDO12, &max8997_ldo12_data },
-	{ MAX8997_LDO13, &max8997_ldo13_data },
-	{ MAX8997_LDO14, &max8997_ldo14_data },
-	{ MAX8997_LDO15, &max8997_ldo15_data },
-	{ MAX8997_LDO16, &max8997_ldo16_data },
-
-	{ MAX8997_LDO18, &max8997_ldo18_data },
-	{ MAX8997_LDO21, &max8997_ldo21_data },
-
-	{ MAX8997_BUCK1, &max8997_buck1_data },
-	{ MAX8997_BUCK2, &max8997_buck2_data },
-	{ MAX8997_BUCK3, &max8997_buck3_data },
-	{ MAX8997_BUCK4, &max8997_buck4_data },
-	{ MAX8997_BUCK5, &max8997_buck5_data },
-	{ MAX8997_BUCK6, &max8997_buck6_data },
-	{ MAX8997_BUCK7, &max8997_buck7_data },
-
-	{ MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
-	{ MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
-
-	{ MAX8997_ENVICHG, &max8997_vichg_data },
-	{ MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
-	{ MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
-	{ MAX8997_CHARGER_CV, &max8997_charger_cv_data },
-	{ MAX8997_CHARGER, &max8997_charger_data },
-	{ MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
-};
-
-static struct max8997_platform_data __initdata nuri_max8997_pdata = {
-	.wakeup			= 1,
-
-	.num_regulators		= ARRAY_SIZE(nuri_max8997_regulators),
-	.regulators		= nuri_max8997_regulators,
-
-	.buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
-
-	.buck1_voltage[0] = 1350000, /* 1.35V */
-	.buck1_voltage[1] = 1300000, /* 1.3V */
-	.buck1_voltage[2] = 1250000, /* 1.25V */
-	.buck1_voltage[3] = 1200000, /* 1.2V */
-	.buck1_voltage[4] = 1150000, /* 1.15V */
-	.buck1_voltage[5] = 1100000, /* 1.1V */
-	.buck1_voltage[6] = 1000000, /* 1.0V */
-	.buck1_voltage[7] = 950000, /* 0.95V */
-
-	.buck2_voltage[0] = 1100000, /* 1.1V */
-	.buck2_voltage[1] = 1000000, /* 1.0V */
-	.buck2_voltage[2] = 950000, /* 0.95V */
-	.buck2_voltage[3] = 900000, /* 0.9V */
-	.buck2_voltage[4] = 1100000, /* 1.1V */
-	.buck2_voltage[5] = 1000000, /* 1.0V */
-	.buck2_voltage[6] = 950000, /* 0.95V */
-	.buck2_voltage[7] = 900000, /* 0.9V */
-
-	.buck5_voltage[0] = 1200000, /* 1.2V */
-	.buck5_voltage[1] = 1200000, /* 1.2V */
-	.buck5_voltage[2] = 1200000, /* 1.2V */
-	.buck5_voltage[3] = 1200000, /* 1.2V */
-	.buck5_voltage[4] = 1200000, /* 1.2V */
-	.buck5_voltage[5] = 1200000, /* 1.2V */
-	.buck5_voltage[6] = 1200000, /* 1.2V */
-	.buck5_voltage[7] = 1200000, /* 1.2V */
-};
-
-/* GPIO I2C 5 (PMIC) */
-enum { I2C5_MAX8997 };
-static struct i2c_board_info i2c5_devs[] __initdata = {
-	[I2C5_MAX8997] = {
-		I2C_BOARD_INFO("max8997", 0xCC >> 1),
-		.platform_data	= &nuri_max8997_pdata,
-	},
-};
-
-static struct max17042_platform_data nuri_battery_platform_data = {
-};
-
-/* GPIO I2C 9 (Fuel Gauge) */
-static struct i2c_gpio_platform_data i2c9_gpio_data = {
-	.sda_pin		= EXYNOS4_GPY4(0),      /* XM0ADDR_8 */
-	.scl_pin		= EXYNOS4_GPY4(1),      /* XM0ADDR_9 */
-};
-static struct platform_device i2c9_gpio = {
-	.name			= "i2c-gpio",
-	.id			= 9,
-	.dev			= {
-		.platform_data	= &i2c9_gpio_data,
-	},
-};
-enum { I2C9_MAX17042};
-static struct i2c_board_info i2c9_devs[] __initdata = {
-	[I2C9_MAX17042] = {
-		I2C_BOARD_INFO("max17042", 0x36),
-		.platform_data = &nuri_battery_platform_data,
-	},
-};
-
-/* MAX8903 Secondary Charger */
-static struct regulator_consumer_supply supplies_max8903[] = {
-	REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
-};
-
-static struct regulator_init_data max8903_charger_en_data = {
-	.constraints = {
-		.name		= "VOUT_CHARGER",
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
-	.consumer_supplies = supplies_max8903,
-};
-
-static struct fixed_voltage_config max8903_charger_en = {
-	.supply_name = "VOUT_CHARGER",
-	.microvolts = 5000000, /* Assume 5VDC */
-	.gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
-	.enable_high = 0, /* Enable = Low */
-	.enabled_at_boot = 1,
-	.init_data = &max8903_charger_en_data,
-};
-
-static struct platform_device max8903_fixed_reg_dev = {
-	.name = "reg-fixed-voltage",
-	.id = FIXED_REG_ID_MAX8903,
-	.dev = { .platform_data	= &max8903_charger_en },
-};
-
-static struct max8903_pdata nuri_max8903 = {
-	/*
-	 * cen: don't control with the driver, let it be
-	 * controlled by regulator above
-	 */
-	.dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
-	/* uok, usus: not connected */
-	.chg = EXYNOS4_GPE2(0), /* TA_nCHG */
-	/* flt: vcc_1.8V_pda */
-	.dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
-
-	.dc_valid = true,
-	.usb_valid = false, /* USB is not wired to MAX8903 */
-};
-
-static struct platform_device nuri_max8903_device = {
-	.name			= "max8903-charger",
-	.dev			= {
-		.platform_data	= &nuri_max8903,
-	},
-};
-
-static void __init nuri_power_init(void)
-{
-	int gpio;
-	int ta_en = 0;
-
-	gpio = EXYNOS4_GPX0(7);
-	gpio_request(gpio, "AP_PMIC_IRQ");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
-	gpio = EXYNOS4_GPX2(3);
-	gpio_request(gpio, "FUEL_ALERT");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
-	gpio = nuri_max8903.dok;
-	gpio_request(gpio, "TA_nCONNECTED");
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-	ta_en = gpio_get_value(gpio) ? 0 : 1;
-
-	gpio = nuri_max8903.chg;
-	gpio_request(gpio, "TA_nCHG");
-	gpio_direction_input(gpio);
-
-	gpio = nuri_max8903.dcm;
-	gpio_request(gpio, "CURR_ADJ");
-	gpio_direction_output(gpio, ta_en);
-}
-
-/* USB EHCI */
-static struct s5p_ehci_platdata nuri_ehci_pdata;
-
-static void __init nuri_ehci_init(void)
-{
-	struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata;
-
-	s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat nuri_hsotg_pdata;
-
-/* CAMERA */
-static struct regulator_consumer_supply cam_vt_cam15_supply =
-	REGULATOR_SUPPLY("vdd_core", "6-003c");
-
-static struct regulator_init_data cam_vt_cam15_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_vt_cam15_supply,
-};
-
-static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
-	.supply_name	= "VT_CAM_1.5V",
-	.microvolts	= 1500000,
-	.gpio		= EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_vt_cam15_reg_init_data,
-};
-
-static struct platform_device cam_vt_cam15_fixed_rdev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
-	.dev = { .platform_data	= &cam_vt_cam15_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_vdda_supply[] = {
-	REGULATOR_SUPPLY("vdda", "6-003c"),
-	REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data cam_vdda_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
-	.consumer_supplies = cam_vdda_supply,
-};
-
-static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
-	.supply_name	= "CAM_IO_EN",
-	.microvolts	= 2800000,
-	.gpio		= EXYNOS4_GPE2(1), /* CAM_IO_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_vdda_reg_init_data,
-};
-
-static struct platform_device cam_vdda_fixed_rdev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
-	.dev = { .platform_data	= &cam_vdda_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply camera_8m_12v_supply =
-	REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data cam_8m_12v_reg_init_data = {
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &camera_8m_12v_supply,
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS
-	},
-};
-
-static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
-	.supply_name	= "8M_1.2V",
-	.microvolts	= 1200000,
-	.gpio		= EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_8m_12v_reg_init_data,
-};
-
-static struct platform_device cam_8m_12v_fixed_rdev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
-	.dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
-	.clk_rate	= 166000000UL,
-	.lanes		= 2,
-	.hs_settle	= 12,
-};
-
-#define GPIO_CAM_MEGA_RST	EXYNOS4_GPY3(7) /* ISP_RESET */
-#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPL2(5)
-#define GPIO_CAM_VT_NSTBY	EXYNOS4_GPL2(0)
-#define GPIO_CAM_VT_NRST	EXYNOS4_GPL2(1)
-
-static struct s5k6aa_platform_data s5k6aa_pldata = {
-	.mclk_frequency	= 24000000UL,
-	.gpio_reset	= { GPIO_CAM_VT_NRST, 0 },
-	.gpio_stby	= { GPIO_CAM_VT_NSTBY, 0 },
-	.bus_type	= V4L2_MBUS_PARALLEL,
-	.horiz_flip	= 1,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
-	I2C_BOARD_INFO("S5K6AA", 0x3c),
-	.platform_data = &s5k6aa_pldata,
-};
-
-static struct m5mols_platform_data m5mols_platdata = {
-	.gpio_reset = GPIO_CAM_MEGA_RST,
-};
-
-static struct i2c_board_info m5mols_board_info = {
-	I2C_BOARD_INFO("M5MOLS", 0x1F),
-	.platform_data	= &m5mols_platdata,
-};
-
-static struct fimc_source_info nuri_camera_sensors[] = {
-	{
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_RISING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.fimc_bus_type	= FIMC_BUS_TYPE_ITU_601,
-		.board_info	= &s5k6aa_board_info,
-		.clk_frequency	= 24000000UL,
-		.i2c_bus_num	= 6,
-	}, {
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.fimc_bus_type	= FIMC_BUS_TYPE_MIPI_CSI2,
-		.board_info	= &m5mols_board_info,
-		.clk_frequency	= 24000000UL,
-	},
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
-	.source_info	= nuri_camera_sensors,
-	.num_clients	= ARRAY_SIZE(nuri_camera_sensors),
-};
-
-static struct gpio nuri_camera_gpios[] = {
-	{ GPIO_CAM_VT_NSTBY,	GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
-	{ GPIO_CAM_VT_NRST,	GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST"  },
-	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,           "8M_ISP_INT"  },
-	{ GPIO_CAM_MEGA_RST,	GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
-};
-
-static void __init nuri_camera_init(void)
-{
-	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
-			 &s5p_device_mipi_csis0);
-	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
-			 &s5p_device_fimc_md);
-
-	if (gpio_request_array(nuri_camera_gpios,
-			       ARRAY_SIZE(nuri_camera_gpios))) {
-		pr_err("%s: GPIO request failed\n", __func__);
-		return;
-	}
-
-	m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
-	if (m5mols_board_info.irq >= 0)
-		s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
-	else
-		pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
-
-	/* Free GPIOs controlled directly by the sensor drivers. */
-	gpio_free(GPIO_CAM_VT_NRST);
-	gpio_free(GPIO_CAM_VT_NSTBY);
-	gpio_free(GPIO_CAM_MEGA_RST);
-
-	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
-		pr_err("%s: Camera port A setup failed\n", __func__);
-		return;
-	}
-	/* Increase drive strength of the sensor clock output */
-	s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
-}
-
-static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
-	.frequency	= 400000U,
-	.sda_delay	= 200,
-	.bus_num	= 6,
-};
-
-static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
-	.frequency	= 400000U,
-	.sda_delay	= 200,
-};
-
-/* DEVFREQ controlling memory/bus */
-static struct platform_device exynos4_bus_devfreq = {
-	.name			= "exynos4210-busfreq",
-};
-
-static struct platform_device *nuri_devices[] __initdata = {
-	/* Samsung Platform Devices */
-	&s3c_device_i2c5, /* PMIC should initialize first */
-	&s3c_device_i2c0,
-	&s3c_device_i2c6,
-	&emmc_fixed_voltage,
-	&s5p_device_mipi_csis0,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_fimd0,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_wdt,
-	&s3c_device_timer[0],
-	&s5p_device_ehci,
-	&s3c_device_i2c3,
-	&i2c9_gpio,
-	&s3c_device_adc,
-	&s5p_device_g2d,
-	&s5p_device_jpeg,
-	&s3c_device_rtc,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&s5p_device_fimc_md,
-	&s3c_device_usb_hsotg,
-
-	/* NURI Devices */
-	&nuri_gpio_keys,
-	&nuri_lcd_device,
-	&nuri_backlight_device,
-	&max8903_fixed_reg_dev,
-	&nuri_max8903_device,
-	&cam_vt_cam15_fixed_rdev,
-	&cam_vdda_fixed_rdev,
-	&cam_8m_12v_fixed_rdev,
-	&exynos4_bus_devfreq,
-};
-
-static void __init nuri_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
-	xxti_f = 0;
-	xusbxti_f = 24000000;
-}
-
-static void __init nuri_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init nuri_machine_init(void)
-{
-	nuri_sdhci_init();
-	nuri_tsp_init();
-	nuri_power_init();
-
-	s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
-	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-	s3c_i2c3_set_platdata(&i2c3_data);
-	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
-	s3c_i2c5_set_platdata(NULL);
-	i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
-	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
-	i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
-	i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
-	s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
-
-#ifdef CONFIG_DRM_EXYNOS
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
-	s5p_fimd0_set_platdata(&nuri_fb_pdata);
-#endif
-
-	nuri_camera_init();
-
-	nuri_ehci_init();
-	s3c_hsotg_set_platdata(&nuri_hsotg_pdata);
-
-	/* Last */
-	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
-}
-
-MACHINE_START(NURI, "NURI")
-	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= nuri_map_io,
-	.init_machine	= nuri_machine_init,
-	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
-	.reserve        = &nuri_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
deleted file mode 100644
index 27f03ed5d06..00000000000
--- a/arch/arm/mach-exynos/mach-origen.c
+++ /dev/null
@@ -1,823 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-origen.c
- *
- * Copyright (c) 2011 Insignal Co., Ltd.
- *		http://www.insignal.co.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/max8997.h>
-#include <linux/lcd.h>
-#include <linux/rfkill-gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-ohci-exynos.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-#include <plat/hdmi.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define ORIGEN_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define ORIGEN_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= ORIGEN_UCON_DEFAULT,
-		.ulcon		= ORIGEN_ULCON_DEFAULT,
-		.ufcon		= ORIGEN_UFCON_DEFAULT,
-	},
-};
-
-static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
-	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
-	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
-	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
-	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */
-};
-static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
-	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
-	REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
-};
-static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
-	REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
-	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
-	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */
-};
-static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
-	REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
-	REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
-};
-static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
-	REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
-	REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata buck1_consumer[] = {
-	REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata buck2_consumer[] = {
-	REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata buck3_consumer[] = {
-	REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
-};
-static struct regulator_consumer_supply __initdata buck7_consumer[] = {
-	REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
-	.constraints	= {
-		.name		= "VDD_ABB_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data	= {
-	.constraints	= {
-		.name		= "VDD_ALIVE_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
-	.constraints	= {
-		.name		= "VMIPI_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo3_consumer),
-	.consumer_supplies	= ldo3_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
-	.constraints	= {
-		.name		= "VDD_RTC_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
-	.constraints	= {
-		.name		= "VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo6_consumer),
-	.consumer_supplies	= ldo6_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
-	.constraints	= {
-		.name		= "VDD_AUD_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo7_consumer),
-	.consumer_supplies	= ldo7_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
-	.constraints	= {
-		.name		= "VADC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo8_consumer),
-	.consumer_supplies	= ldo8_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
-	.constraints	= {
-		.name		= "DVDD_SWB_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo9_consumer),
-	.consumer_supplies	= ldo9_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
-	.constraints	= {
-		.name		= "VDD_PLL_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
-	.constraints	= {
-		.name		= "VDD_AUD_3V",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo11_consumer),
-	.consumer_supplies	= ldo11_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
-	.constraints	= {
-		.name		= "AVDD18_SWB_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo14_consumer),
-	.consumer_supplies	= ldo14_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo17_data = {
-	.constraints	= {
-		.name		= "VDD_SWB_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ldo17_consumer),
-	.consumer_supplies	= ldo17_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
-	.constraints	= {
-		.name		= "VDD_MIF_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
-	.constraints	= {
-		.name		= "VDD_ARM_1.2V",
-		.min_uV		= 950000,
-		.max_uV		= 1350000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck1_consumer),
-	.consumer_supplies	= buck1_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
-	.constraints	= {
-		.name		= "VDD_INT_1.1V",
-		.min_uV		= 900000,
-		.max_uV		= 1100000,
-		.always_on	= 1,
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck2_consumer),
-	.consumer_supplies	= buck2_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
-	.constraints	= {
-		.name		= "VDD_G3D_1.1V",
-		.min_uV		= 900000,
-		.max_uV		= 1100000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-					REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck3_consumer),
-	.consumer_supplies	= buck3_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
-	.constraints	= {
-		.name		= "VDDQ_M1M2_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
-	.constraints	= {
-		.name		= "VDD_LCD_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.boot_on	= 1,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(buck7_consumer),
-	.consumer_supplies	= buck7_consumer,
-};
-
-static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
-	{ MAX8997_LDO1,		&max8997_ldo1_data },
-	{ MAX8997_LDO2,		&max8997_ldo2_data },
-	{ MAX8997_LDO3,		&max8997_ldo3_data },
-	{ MAX8997_LDO4,		&max8997_ldo4_data },
-	{ MAX8997_LDO6,		&max8997_ldo6_data },
-	{ MAX8997_LDO7,		&max8997_ldo7_data },
-	{ MAX8997_LDO8,		&max8997_ldo8_data },
-	{ MAX8997_LDO9,		&max8997_ldo9_data },
-	{ MAX8997_LDO10,	&max8997_ldo10_data },
-	{ MAX8997_LDO11,	&max8997_ldo11_data },
-	{ MAX8997_LDO14,	&max8997_ldo14_data },
-	{ MAX8997_LDO17,	&max8997_ldo17_data },
-	{ MAX8997_LDO21,	&max8997_ldo21_data },
-	{ MAX8997_BUCK1,	&max8997_buck1_data },
-	{ MAX8997_BUCK2,	&max8997_buck2_data },
-	{ MAX8997_BUCK3,	&max8997_buck3_data },
-	{ MAX8997_BUCK5,	&max8997_buck5_data },
-	{ MAX8997_BUCK7,	&max8997_buck7_data },
-};
-
-static struct max8997_platform_data __initdata origen_max8997_pdata = {
-	.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
-	.regulators	= origen_max8997_regulators,
-
-	.wakeup	= true,
-	.buck1_gpiodvs	= false,
-	.buck2_gpiodvs	= false,
-	.buck5_gpiodvs	= false,
-
-	.ignore_gpiodvs_side_effect = true,
-	.buck125_default_idx = 0x0,
-
-	.buck125_gpios[0]	= EXYNOS4_GPX0(0),
-	.buck125_gpios[1]	= EXYNOS4_GPX0(1),
-	.buck125_gpios[2]	= EXYNOS4_GPX0(2),
-
-	.buck1_voltage[0]	= 1350000,
-	.buck1_voltage[1]	= 1300000,
-	.buck1_voltage[2]	= 1250000,
-	.buck1_voltage[3]	= 1200000,
-	.buck1_voltage[4]	= 1150000,
-	.buck1_voltage[5]	= 1100000,
-	.buck1_voltage[6]	= 1000000,
-	.buck1_voltage[7]	= 950000,
-
-	.buck2_voltage[0]	= 1100000,
-	.buck2_voltage[1]	= 1100000,
-	.buck2_voltage[2]	= 1100000,
-	.buck2_voltage[3]	= 1100000,
-	.buck2_voltage[4]	= 1000000,
-	.buck2_voltage[5]	= 1000000,
-	.buck2_voltage[6]	= 1000000,
-	.buck2_voltage[7]	= 1000000,
-
-	.buck5_voltage[0]	= 1200000,
-	.buck5_voltage[1]	= 1200000,
-	.buck5_voltage[2]	= 1200000,
-	.buck5_voltage[3]	= 1200000,
-	.buck5_voltage[4]	= 1200000,
-	.buck5_voltage[5]	= 1200000,
-	.buck5_voltage[6]	= 1200000,
-	.buck5_voltage[7]	= 1200000,
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("max8997", (0xCC >> 1)),
-		.platform_data	= &origen_max8997_pdata,
-		.irq		= IRQ_EINT(4),
-	},
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-};
-
-/* USB EHCI */
-static struct s5p_ehci_platdata origen_ehci_pdata;
-
-static void __init origen_ehci_init(void)
-{
-	struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
-
-	s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OHCI */
-static struct exynos4_ohci_platdata origen_ohci_pdata;
-
-static void __init origen_ohci_init(void)
-{
-	struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
-
-	exynos4_ohci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat origen_hsotg_pdata;
-
-static struct gpio_led origen_gpio_leds[] = {
-	{
-		.name			= "origen::status1",
-		.default_trigger	= "heartbeat",
-		.gpio			= EXYNOS4_GPX1(3),
-		.active_low		= 1,
-	},
-	{
-		.name			= "origen::status2",
-		.default_trigger	= "mmc0",
-		.gpio			= EXYNOS4_GPX1(4),
-		.active_low		= 1,
-	},
-};
-
-static struct gpio_led_platform_data origen_gpio_led_info = {
-	.leds		= origen_gpio_leds,
-	.num_leds	= ARRAY_SIZE(origen_gpio_leds),
-};
-
-static struct platform_device origen_leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &origen_gpio_led_info,
-	},
-};
-
-static struct gpio_keys_button origen_gpio_keys_table[] = {
-	{
-		.code			= KEY_MENU,
-		.gpio			= EXYNOS4_GPX1(5),
-		.desc			= "gpio-keys: KEY_MENU",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_HOME,
-		.gpio			= EXYNOS4_GPX1(6),
-		.desc			= "gpio-keys: KEY_HOME",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_BACK,
-		.gpio			= EXYNOS4_GPX1(7),
-		.desc			= "gpio-keys: KEY_BACK",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_UP,
-		.gpio			= EXYNOS4_GPX2(0),
-		.desc			= "gpio-keys: KEY_UP",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_DOWN,
-		.gpio			= EXYNOS4_GPX2(1),
-		.desc			= "gpio-keys: KEY_DOWN",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.wakeup			= 1,
-		.debounce_interval	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data origen_gpio_keys_data = {
-	.buttons	= origen_gpio_keys_table,
-	.nbuttons	= ARRAY_SIZE(origen_gpio_keys_table),
-};
-
-static struct platform_device origen_device_gpiokeys = {
-	.name		= "gpio-keys",
-	.dev		= {
-		.platform_data	= &origen_gpio_keys_data,
-	},
-};
-
-static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
-	int ret;
-
-	if (power)
-		ret = gpio_request_one(EXYNOS4_GPE3(4),
-					GPIOF_OUT_INIT_HIGH, "GPE3_4");
-	else
-		ret = gpio_request_one(EXYNOS4_GPE3(4),
-					GPIOF_OUT_INIT_LOW, "GPE3_4");
-
-	gpio_free(EXYNOS4_GPE3(4));
-
-	if (ret)
-		pr_err("failed to request gpio for LCD power: %d\n", ret);
-}
-
-static struct plat_lcd_data origen_lcd_hv070wsa_data = {
-	.set_power = lcd_hv070wsa_set_power,
-};
-
-static struct platform_device origen_lcd_hv070wsa = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &origen_lcd_hv070wsa_data,
-};
-
-static struct pwm_lookup origen_pwm_lookup[] = {
-	PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL),
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel	= {
-		.timing	= {
-			.left_margin	= 64,
-			.right_margin	= 16,
-			.upper_margin	= 64,
-			.lower_margin	= 16,
-			.hsync_len	= 48,
-			.vsync_len	= 3,
-			.xres		= 1024,
-			.yres		= 600,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-				VIDCON1_INV_VCLK,
-	.default_win	= 0,
-	.bpp		= 32,
-};
-#else
-static struct s3c_fb_pd_win origen_fb_win0 = {
-	.xres			= 1024,
-	.yres			= 600,
-	.max_bpp		= 32,
-	.default_bpp		= 24,
-	.virtual_x		= 1024,
-	.virtual_y		= 2 * 600,
-};
-
-static struct fb_videomode origen_lcd_timing = {
-	.left_margin	= 64,
-	.right_margin	= 16,
-	.upper_margin	= 64,
-	.lower_margin	= 16,
-	.hsync_len	= 48,
-	.vsync_len	= 3,
-	.xres		= 1024,
-	.yres		= 600,
-};
-
-static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
-	.win[0]		= &origen_fb_win0,
-	.vtiming	= &origen_lcd_timing,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
-				VIDCON1_INV_VCLK,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-/* Bluetooth rfkill gpio platform data */
-static struct rfkill_gpio_platform_data origen_bt_pdata = {
-	.reset_gpio	= EXYNOS4_GPX2(2),
-	.shutdown_gpio	= -1,
-	.type		= RFKILL_TYPE_BLUETOOTH,
-	.name		= "origen-bt",
-};
-
-/* Bluetooth Platform device */
-static struct platform_device origen_device_bluetooth = {
-	.name		= "rfkill_gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data	= &origen_bt_pdata,
-	},
-};
-
-static struct platform_device *origen_devices[] __initdata = {
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc0,
-	&s3c_device_i2c0,
-	&s3c_device_rtc,
-	&s3c_device_usb_hsotg,
-	&s3c_device_wdt,
-	&s5p_device_ehci,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_fimc_md,
-	&s5p_device_fimd0,
-	&s5p_device_g2d,
-	&s5p_device_hdmi,
-	&s5p_device_i2c_hdmiphy,
-	&s5p_device_jpeg,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&s5p_device_mixer,
-	&exynos4_device_ohci,
-	&origen_device_gpiokeys,
-	&origen_lcd_hv070wsa,
-	&origen_leds_gpio,
-	&origen_device_bluetooth,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info origen_bl_gpio_info = {
-	.no		= EXYNOS4_GPD0(0),
-	.func		= S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data origen_bl_data = {
-	.pwm_id		= 0,
-	.pwm_period_ns	= 1000,
-};
-
-static void __init origen_bt_setup(void)
-{
-	gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
-	/* 4 UART Pins configuration */
-	s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
-	/* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
-	s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
-	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
-}
-
-/* I2C module and id for HDMIPHY */
-static struct i2c_board_info hdmiphy_info = {
-	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
-};
-
-static void s5p_tv_setup(void)
-{
-	/* Direct HPD to HDMI chip */
-	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
-	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
-	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init origen_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
-	xxti_f = 0;
-	xusbxti_f = 24000000;
-}
-
-static void __init origen_power_init(void)
-{
-	gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
-	s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
-}
-
-static void __init origen_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init origen_machine_init(void)
-{
-	origen_power_init();
-
-	s3c_i2c0_set_platdata(NULL);
-	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
-
-	/*
-	 * Since sdhci instance 2 can contain a bootable media,
-	 * sdhci instance 0 is registered after instance 2.
-	 */
-	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
-	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
-
-	origen_ehci_init();
-	origen_ohci_init();
-	s3c_hsotg_set_platdata(&origen_hsotg_pdata);
-
-	s5p_tv_setup();
-	s5p_i2c_hdmiphy_set_platdata(NULL);
-	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
-	s5p_fimd0_set_platdata(&origen_lcd_pdata);
-#endif
-
-	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
-
-	pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
-	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
-
-	origen_bt_setup();
-}
-
-MACHINE_START(ORIGEN, "ORIGEN")
-	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= origen_map_io,
-	.init_machine	= origen_machine_init,
-	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
-	.reserve	= &origen_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
deleted file mode 100644
index 2c8af961792..00000000000
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/lcd.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_core.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <plat/backlight.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/keypad.h>
-#include <plat/mfc.h>
-#include <plat/regs-serial.h>
-#include <plat/sdhci.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK4X12_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDK4X12_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDK4X12_UCON_DEFAULT,
-		.ulcon		= SMDK4X12_ULCON_DEFAULT,
-		.ufcon		= SMDK4X12_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDK4X12_UCON_DEFAULT,
-		.ulcon		= SMDK4X12_ULCON_DEFAULT,
-		.ufcon		= SMDK4X12_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDK4X12_UCON_DEFAULT,
-		.ulcon		= SMDK4X12_ULCON_DEFAULT,
-		.ufcon		= SMDK4X12_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDK4X12_UCON_DEFAULT,
-		.ulcon		= SMDK4X12_ULCON_DEFAULT,
-		.ufcon		= SMDK4X12_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-};
-
-static struct regulator_consumer_supply max8997_buck1 =
-	REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_consumer_supply max8997_buck2 =
-	REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply max8997_buck3 =
-	REGULATOR_SUPPLY("vdd_g3d", NULL);
-
-static struct regulator_init_data max8997_buck1_data = {
-	.constraints	= {
-		.name		= "VDD_ARM_SMDK4X12",
-		.min_uV		= 925000,
-		.max_uV		= 1350000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck1,
-};
-
-static struct regulator_init_data max8997_buck2_data = {
-	.constraints	= {
-		.name		= "VDD_INT_SMDK4X12",
-		.min_uV		= 950000,
-		.max_uV		= 1150000,
-		.always_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck2,
-};
-
-static struct regulator_init_data max8997_buck3_data = {
-	.constraints	= {
-		.name		= "VDD_G3D_SMDK4X12",
-		.min_uV		= 950000,
-		.max_uV		= 1150000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-				  REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8997_buck3,
-};
-
-static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
-	{ MAX8997_BUCK1, &max8997_buck1_data },
-	{ MAX8997_BUCK2, &max8997_buck2_data },
-	{ MAX8997_BUCK3, &max8997_buck3_data },
-};
-
-static struct max8997_platform_data smdk4x12_max8997_pdata = {
-	.num_regulators	= ARRAY_SIZE(smdk4x12_max8997_regulators),
-	.regulators	= smdk4x12_max8997_regulators,
-
-	.buck1_voltage[0] = 1100000,	/* 1.1V */
-	.buck1_voltage[1] = 1100000,	/* 1.1V */
-	.buck1_voltage[2] = 1100000,	/* 1.1V */
-	.buck1_voltage[3] = 1100000,	/* 1.1V */
-	.buck1_voltage[4] = 1100000,	/* 1.1V */
-	.buck1_voltage[5] = 1100000,	/* 1.1V */
-	.buck1_voltage[6] = 1000000,	/* 1.0V */
-	.buck1_voltage[7] = 950000,	/* 0.95V */
-
-	.buck2_voltage[0] = 1100000,	/* 1.1V */
-	.buck2_voltage[1] = 1000000,	/* 1.0V */
-	.buck2_voltage[2] = 950000,	/* 0.95V */
-	.buck2_voltage[3] = 900000,	/* 0.9V */
-	.buck2_voltage[4] = 1100000,	/* 1.1V */
-	.buck2_voltage[5] = 1000000,	/* 1.0V */
-	.buck2_voltage[6] = 950000,	/* 0.95V */
-	.buck2_voltage[7] = 900000,	/* 0.9V */
-
-	.buck5_voltage[0] = 1100000,	/* 1.1V */
-	.buck5_voltage[1] = 1100000,	/* 1.1V */
-	.buck5_voltage[2] = 1100000,	/* 1.1V */
-	.buck5_voltage[3] = 1100000,	/* 1.1V */
-	.buck5_voltage[4] = 1100000,	/* 1.1V */
-	.buck5_voltage[5] = 1100000,	/* 1.1V */
-	.buck5_voltage[6] = 1100000,	/* 1.1V */
-	.buck5_voltage[7] = 1100000,	/* 1.1V */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
-	{
-		I2C_BOARD_INFO("max8997", 0x66),
-		.platform_data	= &smdk4x12_max8997_pdata,
-	}
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
-	{ I2C_BOARD_INFO("wm8994", 0x1a), }
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
-	/* nothing here yet */
-};
-
-static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk4x12_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static struct pwm_lookup smdk4x12_pwm_lookup[] = {
-	PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
-};
-
-static uint32_t smdk4x12_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
-	KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
-	KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
-	KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
-};
-
-static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
-	.keymap		= smdk4x12_keymap,
-	.keymap_size	= ARRAY_SIZE(smdk4x12_keymap),
-};
-
-static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
-	.keymap_data	= &smdk4x12_keymap_data,
-	.rows		= 3,
-	.cols		= 8,
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel	= {
-		.timing	= {
-			.left_margin	= 8,
-			.right_margin	= 8,
-			.upper_margin	= 6,
-			.lower_margin	= 6,
-			.hsync_len	= 6,
-			.vsync_len	= 4,
-			.xres		= 480,
-			.yres		= 800,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.default_win	= 0,
-	.bpp		= 32,
-};
-#else
-static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
-	.xres		= 480,
-	.yres		= 800,
-	.virtual_x	= 480,
-	.virtual_y	= 800 * 2,
-	.max_bpp	= 32,
-	.default_bpp	= 24,
-};
-
-static struct fb_videomode smdk4x12_lcd_timing = {
-	.left_margin	= 8,
-	.right_margin	= 8,
-	.upper_margin	= 6,
-	.lower_margin	= 6,
-	.hsync_len	= 6,
-	.vsync_len	= 4,
-	.xres		= 480,
-	.yres		= 800,
-};
-
-static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
-	.win[0]		= &smdk4x12_fb_win0,
-	.vtiming	= &smdk4x12_lcd_timing,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-/* USB OTG */
-static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
-
-static struct platform_device *smdk4x12_devices[] __initdata = {
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c0,
-	&s3c_device_i2c1,
-	&s3c_device_i2c3,
-	&s3c_device_i2c7,
-	&s3c_device_rtc,
-	&s3c_device_usb_hsotg,
-	&s3c_device_wdt,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_fimc_md,
-	&s5p_device_fimd0,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&samsung_device_keypad,
-};
-
-static void __init smdk4x12_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
-}
-
-static void __init smdk4x12_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdk4x12_machine_init(void)
-{
-	s3c_i2c0_set_platdata(NULL);
-	i2c_register_board_info(0, smdk4x12_i2c_devs0,
-				ARRAY_SIZE(smdk4x12_i2c_devs0));
-
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, smdk4x12_i2c_devs1,
-				ARRAY_SIZE(smdk4x12_i2c_devs1));
-
-	s3c_i2c3_set_platdata(NULL);
-	i2c_register_board_info(3, smdk4x12_i2c_devs3,
-				ARRAY_SIZE(smdk4x12_i2c_devs3));
-
-	s3c_i2c7_set_platdata(NULL);
-	i2c_register_board_info(7, smdk4x12_i2c_devs7,
-				ARRAY_SIZE(smdk4x12_i2c_devs7));
-
-	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
-	pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup));
-
-	samsung_keypad_set_platdata(&smdk4x12_keypad_data);
-
-	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
-
-	s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
-	s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
-#endif
-
-	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
-}
-
-MACHINE_START(SMDK4212, "SMDK4212")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdk4x12_map_io,
-	.init_machine	= smdk4x12_machine_init,
-	.init_time	= exynos_init_time,
-	.restart	= exynos4_restart,
-	.reserve	= &smdk4x12_reserve,
-MACHINE_END
-
-MACHINE_START(SMDK4412, "SMDK4412")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdk4x12_map_io,
-	.init_machine	= smdk4x12_machine_init,
-	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
-	.restart	= exynos4_restart,
-	.reserve	= &smdk4x12_reserve,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
deleted file mode 100644
index d95b8cf8525..00000000000
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkv310.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-ohci-exynos.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/keypad.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-#include <plat/mfc.h>
-#include <plat/clock.h>
-#include <plat/hdmi.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKV310_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKV310_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKV310_UCON_DEFAULT,
-		.ulcon		= SMDKV310_ULCON_DEFAULT,
-		.ufcon		= SMDKV310_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKV310_UCON_DEFAULT,
-		.ulcon		= SMDKV310_ULCON_DEFAULT,
-		.ufcon		= SMDKV310_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKV310_UCON_DEFAULT,
-		.ulcon		= SMDKV310_ULCON_DEFAULT,
-		.ufcon		= SMDKV310_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKV310_UCON_DEFAULT,
-		.ulcon		= SMDKV310_ULCON_DEFAULT,
-		.ufcon		= SMDKV310_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-		/* fire nRESET on power up */
-		gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
-		mdelay(100);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 0);
-		mdelay(10);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 1);
-		mdelay(10);
-
-		gpio_free(EXYNOS4_GPX0(6));
-	} else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-	}
-}
-
-static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
-	.set_power		= lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkv310_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel	= {
-		.timing	= {
-			.left_margin	= 13,
-			.right_margin	= 8,
-			.upper_margin	= 7,
-			.lower_margin	= 5,
-			.hsync_len	= 3,
-			.vsync_len	= 1,
-			.xres		= 800,
-			.yres		= 480,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.default_win	= 0,
-	.bpp		= 32,
-};
-#else
-static struct s3c_fb_pd_win smdkv310_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 24,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct fb_videomode smdkv310_lcd_timing = {
-	.left_margin	= 13,
-	.right_margin	= 8,
-	.upper_margin	= 7,
-	.lower_margin	= 5,
-	.hsync_len	= 3,
-	.vsync_len	= 1,
-	.xres		= 800,
-	.yres		= 480,
-};
-
-static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
-	.win[0]		= &smdkv310_fb_win0,
-	.vtiming	= &smdkv310_lcd_timing,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static struct resource smdkv310_smsc911x_resources[] = {
-	[0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K),
-	[1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \
-						| IRQF_TRIGGER_LOW),
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkv310_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smdkv310_smsc911x_resources),
-	.resource	= smdkv310_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static uint32_t smdkv310_keymap[] __initdata = {
-	/* KEY(row, col, keycode) */
-	KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
-	KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
-	KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
-	KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkv310_keymap_data __initdata = {
-	.keymap		= smdkv310_keymap,
-	.keymap_size	= ARRAY_SIZE(smdkv310_keymap),
-};
-
-static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = {
-	.keymap_data	= &smdkv310_keymap_data,
-	.rows		= 2,
-	.cols		= 8,
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-/* USB EHCI */
-static struct s5p_ehci_platdata smdkv310_ehci_pdata;
-
-static void __init smdkv310_ehci_init(void)
-{
-	struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
-
-	s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OHCI */
-static struct exynos4_ohci_platdata smdkv310_ohci_pdata;
-
-static void __init smdkv310_ohci_init(void)
-{
-	struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;
-
-	exynos4_ohci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
-
-/* Audio device */
-static struct platform_device smdkv310_device_audio = {
-	.name = "smdk-audio",
-	.id = -1,
-};
-
-static struct platform_device *smdkv310_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c1,
-	&s5p_device_i2c_hdmiphy,
-	&s3c_device_rtc,
-	&s3c_device_usb_hsotg,
-	&s3c_device_wdt,
-	&s5p_device_ehci,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_fimc_md,
-	&s5p_device_g2d,
-	&s5p_device_jpeg,
-	&exynos4_device_ac97,
-	&exynos4_device_i2s0,
-	&exynos4_device_ohci,
-	&samsung_device_keypad,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&exynos4_device_spdif,
-	&samsung_asoc_idma,
-	&s5p_device_fimd0,
-	&smdkv310_device_audio,
-	&smdkv310_lcd_lte480wv,
-	&smdkv310_smsc911x,
-	&exynos4_device_ahci,
-	&s5p_device_hdmi,
-	&s5p_device_mixer,
-};
-
-static void __init smdkv310_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkv310_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-/* I2C module and id for HDMIPHY */
-static struct i2c_board_info hdmiphy_info = {
-	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
-};
-
-static struct pwm_lookup smdkv310_pwm_lookup[] = {
-	PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
-};
-
-static void s5p_tv_setup(void)
-{
-	/* direct HPD to HDMI chip */
-	WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
-	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
-	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init smdkv310_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
-	xxti_f = 12000000;
-	xusbxti_f = 24000000;
-}
-
-static void __init smdkv310_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdkv310_machine_init(void)
-{
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	smdkv310_smsc911x_init();
-
-	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
-
-	s5p_tv_setup();
-	s5p_i2c_hdmiphy_set_platdata(NULL);
-	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
-
-	samsung_keypad_set_platdata(&smdkv310_keypad_data);
-
-	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
-	pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup));
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
-	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
-#endif
-
-	smdkv310_ehci_init();
-	smdkv310_ohci_init();
-	s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
-
-	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
-}
-
-MACHINE_START(SMDKV310, "SMDKV310")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkv310_map_io,
-	.init_machine	= smdkv310_machine_init,
-	.init_time	= exynos_init_time,
-	.reserve	= &smdkv310_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END
-
-MACHINE_START(SMDKC210, "SMDKC210")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkv310_map_io,
-	.init_machine	= smdkv310_machine_init,
-	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
-	.reserve	= &smdkv310_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
deleted file mode 100644
index 74ddb2b5561..00000000000
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ /dev/null
@@ -1,1159 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mfd/max8998.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max8952.h>
-#include <linux/mmc/host.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/mcs.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mipi-csis.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <drm/exynos_drm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <plat/regs-serial.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-#include <plat/sdhci.h>
-#include <plat/fimc-core.h>
-#include <plat/camport.h>
-
-#include <mach/map.h>
-
-#include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define UNIVERSAL_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define UNIVERSAL_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG256 |	\
-				 S5PV210_UFCON_RXTRIG256)
-
-static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.ucon		= UNIVERSAL_UCON_DEFAULT,
-		.ulcon		= UNIVERSAL_ULCON_DEFAULT,
-		.ufcon		= UNIVERSAL_UFCON_DEFAULT,
-	},
-};
-
-static struct regulator_consumer_supply max8952_consumer =
-	REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_init_data universal_max8952_reg_data = {
-	.constraints	= {
-		.name		= "VARM_1.2V",
-		.min_uV		= 770000,
-		.max_uV		= 1400000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
-		.always_on	= 1,
-		.boot_on	= 1,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &max8952_consumer,
-};
-
-static struct max8952_platform_data universal_max8952_pdata __initdata = {
-	.gpio_vid0	= EXYNOS4_GPX0(3),
-	.gpio_vid1	= EXYNOS4_GPX0(4),
-	.gpio_en	= -1, /* Not controllable, set "Always High" */
-	.default_mode	= 0, /* vid0 = 0, vid1 = 0 */
-	.dvs_mode	= { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
-	.sync_freq	= 0, /* default: fastest */
-	.ramp_speed	= 0, /* default: fastest */
-	.reg_data	= &universal_max8952_reg_data,
-};
-
-static struct regulator_consumer_supply lp3974_buck1_consumer =
-	REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply lp3974_buck2_consumer =
-	REGULATOR_SUPPLY("vddg3d", NULL);
-
-static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
-	REGULATOR_SUPPLY("vdet", "s5p-sdo"),
-	REGULATOR_SUPPLY("vdd_reg", "0-003c"),
-};
-
-static struct regulator_init_data lp3974_buck1_data = {
-	.constraints	= {
-		.name		= "VINT_1.1V",
-		.min_uV		= 750000,
-		.max_uV		= 1500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &lp3974_buck1_consumer,
-};
-
-static struct regulator_init_data lp3974_buck2_data = {
-	.constraints	= {
-		.name		= "VG3D_1.1V",
-		.min_uV		= 750000,
-		.max_uV		= 1500000,
-		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &lp3974_buck2_consumer,
-};
-
-static struct regulator_init_data lp3974_buck3_data = {
-	.constraints	= {
-		.name		= "VCC_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
-	.consumer_supplies = lp3974_buck3_consumer,
-};
-
-static struct regulator_init_data lp3974_buck4_data = {
-	.constraints	= {
-		.name		= "VMEM_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.apply_uV	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo2_data = {
-	.constraints	= {
-		.name		= "VALIVE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
-	REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
-	REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
-	REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
-	REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo3_data = {
-	.constraints	= {
-		.name		= "VUSB+MIPI_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
-	.consumer_supplies = lp3974_ldo3_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
-	REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
-};
-
-static struct regulator_init_data lp3974_ldo4_data = {
-	.constraints	= {
-		.name		= "VADC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
-	.consumer_supplies = lp3974_ldo4_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo5_data = {
-	.constraints	= {
-		.name		= "VTF_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo6_data = {
-	.constraints	= {
-		.name		= "LDO6",
-		.min_uV		= 2000000,
-		.max_uV		= 2000000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
-	REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo7_data = {
-	.constraints	= {
-		.name		= "VLCD+VMIPI_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo7_consumer),
-	.consumer_supplies	= lp3974_ldo7_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
-	REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
-	REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
-};
-
-static struct regulator_init_data lp3974_ldo8_data = {
-	.constraints	= {
-		.name		= "VUSB+VDAC_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
-	.consumer_supplies = lp3974_ldo8_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo9_consumer =
-	REGULATOR_SUPPLY("vddio", "0-003c");
-
-static struct regulator_init_data lp3974_ldo9_data = {
-	.constraints	= {
-		.name		= "VCC_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo9_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo10_data = {
-	.constraints	= {
-		.name		= "VPLL_1.1V",
-		.min_uV		= 1100000,
-		.max_uV		= 1100000,
-		.boot_on	= 1,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo11_consumer =
-	REGULATOR_SUPPLY("dig_28", "0-001f");
-
-static struct regulator_init_data lp3974_ldo11_data = {
-	.constraints	= {
-		.name		= "CAM_AF_3.3V",
-		.min_uV		= 3300000,
-		.max_uV		= 3300000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo11_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo12_data = {
-	.constraints	= {
-		.name		= "PS_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_ldo13_data = {
-	.constraints	= {
-		.name		= "VHIC_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_consumer_supply lp3974_ldo14_consumer =
-	REGULATOR_SUPPLY("dig_18", "0-001f");
-
-static struct regulator_init_data lp3974_ldo14_data = {
-	.constraints	= {
-		.name		= "CAM_I_HOST_1.8V",
-		.min_uV		= 1800000,
-		.max_uV		= 1800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo14_consumer,
-};
-
-
-static struct regulator_consumer_supply lp3974_ldo15_consumer =
-	REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data lp3974_ldo15_data = {
-	.constraints	= {
-		.name		= "CAM_S_DIG+FM33_CORE_1.2V",
-		.min_uV		= 1200000,
-		.max_uV		= 1200000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &lp3974_ldo15_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
-	REGULATOR_SUPPLY("vdda", "0-003c"),
-	REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data lp3974_ldo16_data = {
-	.constraints	= {
-		.name		= "CAM_S_ANA_2.8V",
-		.min_uV		= 2800000,
-		.max_uV		= 2800000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(lp3974_ldo16_consumer),
-	.consumer_supplies	= lp3974_ldo16_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo17_data = {
-	.constraints	= {
-		.name		= "VCC_3.0V_LCD",
-		.min_uV		= 3000000,
-		.max_uV		= 3000000,
-		.apply_uV	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.boot_on	= 1,
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_32khz_ap_data = {
-	.constraints	= {
-		.name		= "32KHz AP",
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_32khz_cp_data = {
-	.constraints	= {
-		.name		= "32KHz CP",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_vichg_data = {
-	.constraints	= {
-		.name		= "VICHG",
-		.state_mem	= {
-			.disabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_esafeout1_data = {
-	.constraints	= {
-		.name		= "SAFEOUT1",
-		.min_uV		= 4800000,
-		.max_uV		= 4800000,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.always_on	= 1,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct regulator_init_data lp3974_esafeout2_data = {
-	.constraints	= {
-		.name		= "SAFEOUT2",
-		.boot_on	= 1,
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-		.state_mem	= {
-			.enabled	= 1,
-		},
-	},
-};
-
-static struct max8998_regulator_data lp3974_regulators[] = {
-	{ MAX8998_LDO2,  &lp3974_ldo2_data },
-	{ MAX8998_LDO3,  &lp3974_ldo3_data },
-	{ MAX8998_LDO4,  &lp3974_ldo4_data },
-	{ MAX8998_LDO5,  &lp3974_ldo5_data },
-	{ MAX8998_LDO6,  &lp3974_ldo6_data },
-	{ MAX8998_LDO7,  &lp3974_ldo7_data },
-	{ MAX8998_LDO8,  &lp3974_ldo8_data },
-	{ MAX8998_LDO9,  &lp3974_ldo9_data },
-	{ MAX8998_LDO10, &lp3974_ldo10_data },
-	{ MAX8998_LDO11, &lp3974_ldo11_data },
-	{ MAX8998_LDO12, &lp3974_ldo12_data },
-	{ MAX8998_LDO13, &lp3974_ldo13_data },
-	{ MAX8998_LDO14, &lp3974_ldo14_data },
-	{ MAX8998_LDO15, &lp3974_ldo15_data },
-	{ MAX8998_LDO16, &lp3974_ldo16_data },
-	{ MAX8998_LDO17, &lp3974_ldo17_data },
-	{ MAX8998_BUCK1, &lp3974_buck1_data },
-	{ MAX8998_BUCK2, &lp3974_buck2_data },
-	{ MAX8998_BUCK3, &lp3974_buck3_data },
-	{ MAX8998_BUCK4, &lp3974_buck4_data },
-	{ MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
-	{ MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
-	{ MAX8998_ENVICHG, &lp3974_vichg_data },
-	{ MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
-	{ MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
-};
-
-static struct max8998_platform_data universal_lp3974_pdata = {
-	.num_regulators		= ARRAY_SIZE(lp3974_regulators),
-	.regulators		= lp3974_regulators,
-	.buck1_voltage1		= 1100000,	/* INT */
-	.buck1_voltage2		= 1000000,
-	.buck1_voltage3		= 1100000,
-	.buck1_voltage4		= 1000000,
-	.buck1_set1		= EXYNOS4_GPX0(5),
-	.buck1_set2		= EXYNOS4_GPX0(6),
-	.buck2_voltage1		= 1200000,	/* G3D */
-	.buck2_voltage2		= 1100000,
-	.buck1_default_idx	= 0,
-	.buck2_set3		= EXYNOS4_GPE2(0),
-	.buck2_default_idx	= 0,
-	.wakeup			= true,
-};
-
-
-enum fixed_regulator_id {
-	FIXED_REG_ID_MMC0,
-	FIXED_REG_ID_HDMI_5V,
-	FIXED_REG_ID_CAM_S_IF,
-	FIXED_REG_ID_CAM_I_CORE,
-	FIXED_REG_ID_CAM_VT_DIO,
-};
-
-static struct regulator_consumer_supply hdmi_fixed_consumer =
-	REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
-
-static struct regulator_init_data hdmi_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "HDMI_5V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &hdmi_fixed_consumer,
-};
-
-static struct fixed_voltage_config hdmi_fixed_voltage_config = {
-	.supply_name		= "HDMI_EN1",
-	.microvolts		= 5000000,
-	.gpio			= EXYNOS4_GPE0(1),
-	.enable_high		= true,
-	.init_data		= &hdmi_fixed_voltage_init_data,
-};
-
-static struct platform_device hdmi_fixed_voltage = {
-	.name			= "reg-fixed-voltage",
-	.id			= FIXED_REG_ID_HDMI_5V,
-	.dev			= {
-		.platform_data	= &hdmi_fixed_voltage_config,
-	},
-};
-
-/* GPIO I2C 5 (PMIC) */
-static struct i2c_board_info i2c5_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("max8952", 0xC0 >> 1),
-		.platform_data	= &universal_max8952_pdata,
-	}, {
-		I2C_BOARD_INFO("lp3974", 0xCC >> 1),
-		.platform_data	= &universal_lp3974_pdata,
-	},
-};
-
-/* I2C3 (TSP) */
-static struct mxt_platform_data qt602240_platform_data = {
-	.x_line		= 19,
-	.y_line		= 11,
-	.x_size		= 800,
-	.y_size		= 480,
-	.blen		= 0x11,
-	.threshold	= 0x28,
-	.voltage	= 2800000,		/* 2.8V */
-	.orient		= MXT_DIAGONAL,
-	.irqflags	= IRQF_TRIGGER_FALLING,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("qt602240_ts", 0x4a),
-		.platform_data = &qt602240_platform_data,
-	},
-};
-
-static void __init universal_tsp_init(void)
-{
-	int gpio;
-
-	/* TSP_LDO_ON: XMDMADDR_11 */
-	gpio = EXYNOS4_GPE2(3);
-	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
-	gpio_export(gpio, 0);
-
-	/* TSP_INT: XMDMADDR_7 */
-	gpio = EXYNOS4_GPE1(7);
-	gpio_request(gpio, "TSP_INT");
-
-	s5p_register_gpio_interrupt(gpio);
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-	i2c3_devs[0].irq = gpio_to_irq(gpio);
-}
-
-
-/* GPIO I2C 12 (3 Touchkey) */
-static uint32_t touchkey_keymap[] = {
-	/* MCS_KEY_MAP(value, keycode) */
-	MCS_KEY_MAP(0, KEY_MENU),		/* KEY_SEND */
-	MCS_KEY_MAP(1, KEY_BACK),		/* KEY_END */
-};
-
-static struct mcs_platform_data touchkey_data = {
-	.keymap		= touchkey_keymap,
-	.keymap_size	= ARRAY_SIZE(touchkey_keymap),
-	.key_maxval	= 2,
-};
-
-/* GPIO I2C 3_TOUCH 2.8V */
-#define I2C_GPIO_BUS_12		12
-static struct i2c_gpio_platform_data i2c_gpio12_data = {
-	.sda_pin	= EXYNOS4_GPE4(0),	/* XMDMDATA_8 */
-	.scl_pin	= EXYNOS4_GPE4(1),	/* XMDMDATA_9 */
-};
-
-static struct platform_device i2c_gpio12 = {
-	.name		= "i2c-gpio",
-	.id		= I2C_GPIO_BUS_12,
-	.dev		= {
-		.platform_data	= &i2c_gpio12_data,
-	},
-};
-
-static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
-		.platform_data = &touchkey_data,
-	},
-};
-
-static void __init universal_touchkey_init(void)
-{
-	int gpio;
-
-	gpio = EXYNOS4_GPE3(7);			/* XMDMDATA_7 */
-	gpio_request(gpio, "3_TOUCH_INT");
-	s5p_register_gpio_interrupt(gpio);
-	s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
-	i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
-
-	gpio = EXYNOS4_GPE3(3);			/* XMDMDATA_3 */
-	gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
-}
-
-static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
-	.frequency	= 300 * 1000,
-	.sda_delay	= 200,
-};
-
-/* GPIO KEYS */
-static struct gpio_keys_button universal_gpio_keys_tables[] = {
-	{
-		.code			= KEY_VOLUMEUP,
-		.gpio			= EXYNOS4_GPX2(0),	/* XEINT16 */
-		.desc			= "gpio-keys: KEY_VOLUMEUP",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_VOLUMEDOWN,
-		.gpio			= EXYNOS4_GPX2(1),	/* XEINT17 */
-		.desc			= "gpio-keys: KEY_VOLUMEDOWN",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_CONFIG,
-		.gpio			= EXYNOS4_GPX2(2),	/* XEINT18 */
-		.desc			= "gpio-keys: KEY_CONFIG",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_CAMERA,
-		.gpio			= EXYNOS4_GPX2(3),	/* XEINT19 */
-		.desc			= "gpio-keys: KEY_CAMERA",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	}, {
-		.code			= KEY_OK,
-		.gpio			= EXYNOS4_GPX3(5),	/* XEINT29 */
-		.desc			= "gpio-keys: KEY_OK",
-		.type			= EV_KEY,
-		.active_low		= 1,
-		.debounce_interval	= 1,
-	},
-};
-
-static struct gpio_keys_platform_data universal_gpio_keys_data = {
-	.buttons	= universal_gpio_keys_tables,
-	.nbuttons	= ARRAY_SIZE(universal_gpio_keys_tables),
-};
-
-static struct platform_device universal_gpio_keys = {
-	.name			= "gpio-keys",
-	.dev			= {
-		.platform_data	= &universal_gpio_keys_data,
-	},
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
-	.max_width		= 8,
-	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
-	.cd_type		= S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct regulator_consumer_supply mmc0_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
-};
-
-static struct regulator_init_data mmc0_fixed_voltage_init_data = {
-	.constraints		= {
-		.name		= "VMEM_VDD_2.8V",
-		.valid_ops_mask	= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(mmc0_supplies),
-	.consumer_supplies	= mmc0_supplies,
-};
-
-static struct fixed_voltage_config mmc0_fixed_voltage_config = {
-	.supply_name		= "MASSMEMORY_EN",
-	.microvolts		= 2800000,
-	.gpio			= EXYNOS4_GPE1(3),
-	.enable_high		= true,
-	.init_data		= &mmc0_fixed_voltage_init_data,
-};
-
-static struct platform_device mmc0_fixed_voltage = {
-	.name			= "reg-fixed-voltage",
-	.id			= FIXED_REG_ID_MMC0,
-	.dev			= {
-		.platform_data	= &mmc0_fixed_voltage_config,
-	},
-};
-
-/* SD */
-static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.ext_cd_gpio		= EXYNOS4_GPX3(4),      /* XEINT_28 */
-	.ext_cd_gpio_invert	= 1,
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-};
-
-/* WiFi */
-static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
-	.max_width		= 4,
-	.host_caps		= MMC_CAP_4_BIT_DATA |
-				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
-	.cd_type		= S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init universal_sdhci_init(void)
-{
-	s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
-	s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
-	s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
-}
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
-	/* Gyro, To be updated */
-};
-
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
-	.panel = {
-		.timing	= {
-			.left_margin	= 16,
-			.right_margin	= 16,
-			.upper_margin	= 2,
-			.lower_margin	= 28,
-			.hsync_len	= 2,
-			.vsync_len	= 1,
-			.xres		= 480,
-			.yres		= 800,
-			.refresh	= 55,
-		},
-	},
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
-			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.default_win	= 3,
-	.bpp		= 32,
-};
-#else
-/* Frame Buffer */
-static struct s3c_fb_pd_win universal_fb_win0 = {
-	.max_bpp	= 32,
-	.default_bpp	= 16,
-	.xres		= 480,
-	.yres		= 800,
-	.virtual_x	= 480,
-	.virtual_y	= 2 * 800,
-};
-
-static struct fb_videomode universal_lcd_timing = {
-	.left_margin	= 16,
-	.right_margin	= 16,
-	.upper_margin	= 2,
-	.lower_margin	= 28,
-	.hsync_len	= 2,
-	.vsync_len	= 1,
-	.xres		= 480,
-	.yres		= 800,
-	.refresh	= 55,
-};
-
-static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
-	.win[0]		= &universal_fb_win0,
-	.vtiming	= &universal_lcd_timing,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
-			  VIDCON0_CLKSEL_LCD,
-	.vidcon1	= VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
-			  | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static struct regulator_consumer_supply cam_vt_dio_supply =
-	REGULATOR_SUPPLY("vdd_core", "0-003c");
-
-static struct regulator_init_data cam_vt_dio_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_vt_dio_supply,
-};
-
-static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
-	.supply_name	= "CAM_VT_D_IO",
-	.microvolts	= 2800000,
-	.gpio		= EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
-	.enable_high	= 1,
-	.init_data	= &cam_vt_dio_reg_init_data,
-};
-
-static struct platform_device cam_vt_dio_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
-	.dev = { .platform_data	= &cam_vt_dio_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_i_core_supply =
-	REGULATOR_SUPPLY("core", "0-001f");
-
-static struct regulator_init_data cam_i_core_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_i_core_supply,
-};
-
-static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
-	.supply_name	= "CAM_I_CORE_1.2V",
-	.microvolts	= 1200000,
-	.gpio		= EXYNOS4_GPE2(2),	/* CAM_8M_CORE_EN */
-	.enable_high	= 1,
-	.init_data	= &cam_i_core_reg_init_data,
-};
-
-static struct platform_device cam_i_core_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
-	.dev = { .platform_data	= &cam_i_core_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_s_if_supply =
-	REGULATOR_SUPPLY("d_sensor", "0-001f");
-
-static struct regulator_init_data cam_s_if_reg_init_data = {
-	.constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
-	.num_consumer_supplies = 1,
-	.consumer_supplies = &cam_s_if_supply,
-};
-
-static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
-	.supply_name	= "CAM_S_IF_1.8V",
-	.microvolts	= 1800000,
-	.gpio		= EXYNOS4_GPE3(0),	/* CAM_PWR_EN1 */
-	.enable_high	= 1,
-	.init_data	= &cam_s_if_reg_init_data,
-};
-
-static struct platform_device cam_s_if_fixed_reg_dev = {
-	.name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
-	.dev = { .platform_data	= &cam_s_if_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
-	.clk_rate	= 166000000UL,
-	.lanes		= 2,
-	.hs_settle	= 12,
-};
-
-#define GPIO_CAM_LEVEL_EN(n)	EXYNOS4_GPE4(n + 3)
-#define GPIO_CAM_8M_ISP_INT	EXYNOS4_GPX1(5)	/* XEINT_13 */
-#define GPIO_CAM_MEGA_nRST	EXYNOS4_GPE2(5)
-#define GPIO_CAM_VGA_NRST	EXYNOS4_GPE4(7)
-#define GPIO_CAM_VGA_NSTBY	EXYNOS4_GPE4(6)
-
-static int s5k6aa_set_power(int on)
-{
-	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
-	return 0;
-}
-
-static struct s5k6aa_platform_data s5k6aa_platdata = {
-	.mclk_frequency	= 21600000UL,
-	.gpio_reset	= { GPIO_CAM_VGA_NRST, 0 },
-	.gpio_stby	= { GPIO_CAM_VGA_NSTBY, 0 },
-	.bus_type	= V4L2_MBUS_PARALLEL,
-	.horiz_flip	= 1,
-	.set_power	= s5k6aa_set_power,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
-	I2C_BOARD_INFO("S5K6AA", 0x3C),
-	.platform_data = &s5k6aa_platdata,
-};
-
-static int m5mols_set_power(struct device *dev, int on)
-{
-	gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
-	gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
-	return 0;
-}
-
-static struct m5mols_platform_data m5mols_platdata = {
-	.gpio_reset	= GPIO_CAM_MEGA_nRST,
-	.reset_polarity	= 0,
-	.set_power	= m5mols_set_power,
-};
-
-static struct i2c_board_info m5mols_board_info = {
-	I2C_BOARD_INFO("M5MOLS", 0x1F),
-	.platform_data = &m5mols_platdata,
-};
-
-static struct fimc_source_info universal_camera_sensors[] = {
-	{
-		.mux_id		= 0,
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.fimc_bus_type	= FIMC_BUS_TYPE_ITU_601,
-		.board_info	= &s5k6aa_board_info,
-		.i2c_bus_num	= 0,
-		.clk_frequency	= 24000000UL,
-	}, {
-		.mux_id		= 0,
-		.flags		= V4L2_MBUS_PCLK_SAMPLE_FALLING |
-				  V4L2_MBUS_VSYNC_ACTIVE_LOW,
-		.fimc_bus_type	= FIMC_BUS_TYPE_MIPI_CSI2,
-		.board_info	= &m5mols_board_info,
-		.i2c_bus_num	= 0,
-		.clk_frequency	= 24000000UL,
-	},
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
-	.source_info	= universal_camera_sensors,
-	.num_clients	= ARRAY_SIZE(universal_camera_sensors),
-};
-
-static struct gpio universal_camera_gpios[] = {
-	{ GPIO_CAM_LEVEL_EN(1),	GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
-	{ GPIO_CAM_LEVEL_EN(2),	GPIOF_OUT_INIT_LOW,  "CAM_LVL_EN2" },
-	{ GPIO_CAM_8M_ISP_INT,	GPIOF_IN,            "8M_ISP_INT"  },
-	{ GPIO_CAM_MEGA_nRST,	GPIOF_OUT_INIT_LOW,  "CAM_8M_NRST" },
-	{ GPIO_CAM_VGA_NRST,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NRST"  },
-	{ GPIO_CAM_VGA_NSTBY,	GPIOF_OUT_INIT_LOW,  "CAM_VGA_NSTBY" },
-};
-
-/* USB OTG */
-static struct s3c_hsotg_plat universal_hsotg_pdata;
-
-static void __init universal_camera_init(void)
-{
-	s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
-			 &s5p_device_mipi_csis0);
-	s3c_set_platdata(&fimc_md_platdata,  sizeof(fimc_md_platdata),
-			 &s5p_device_fimc_md);
-
-	if (gpio_request_array(universal_camera_gpios,
-			       ARRAY_SIZE(universal_camera_gpios))) {
-		pr_err("%s: GPIO request failed\n", __func__);
-		return;
-	}
-
-	if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
-		m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
-	else
-		pr_err("Failed to configure 8M_ISP_INT GPIO\n");
-
-	/* Free GPIOs controlled directly by the sensor drivers. */
-	gpio_free(GPIO_CAM_MEGA_nRST);
-	gpio_free(GPIO_CAM_8M_ISP_INT);
-	gpio_free(GPIO_CAM_VGA_NRST);
-	gpio_free(GPIO_CAM_VGA_NSTBY);
-
-	if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
-		pr_err("Camera port A setup failed\n");
-}
-
-static struct platform_device *universal_devices[] __initdata = {
-	/* Samsung Platform Devices */
-	&s5p_device_mipi_csis0,
-	&s5p_device_fimc0,
-	&s5p_device_fimc1,
-	&s5p_device_fimc2,
-	&s5p_device_fimc3,
-	&s5p_device_g2d,
-	&mmc0_fixed_voltage,
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c0,
-	&s3c_device_i2c3,
-	&s3c_device_i2c5,
-	&s5p_device_i2c_hdmiphy,
-	&hdmi_fixed_voltage,
-	&s5p_device_hdmi,
-	&s5p_device_sdo,
-	&s5p_device_mixer,
-
-	/* Universal Devices */
-	&i2c_gpio12,
-	&universal_gpio_keys,
-	&s5p_device_onenand,
-	&s5p_device_fimd0,
-	&s5p_device_jpeg,
-	&s3c_device_usb_hsotg,
-	&s5p_device_mfc,
-	&s5p_device_mfc_l,
-	&s5p_device_mfc_r,
-	&cam_vt_dio_fixed_reg_dev,
-	&cam_i_core_fixed_reg_dev,
-	&cam_s_if_fixed_reg_dev,
-	&s5p_device_fimc_md,
-};
-
-static void __init universal_map_io(void)
-{
-	exynos_init_io(NULL, 0);
-	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
-	exynos_set_timer_source(BIT(2) | BIT(4));
-	xxti_f = 0;
-	xusbxti_f = 24000000;
-}
-
-static void s5p_tv_setup(void)
-{
-	/* direct HPD to HDMI chip */
-	gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
-	s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
-	s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init universal_reserve(void)
-{
-	s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init universal_machine_init(void)
-{
-	universal_sdhci_init();
-	s5p_tv_setup();
-
-	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
-	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-
-	universal_tsp_init();
-	s3c_i2c3_set_platdata(NULL);
-	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
-
-	s3c_i2c5_set_platdata(NULL);
-	s5p_i2c_hdmiphy_set_platdata(NULL);
-	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
-
-#ifdef CONFIG_DRM_EXYNOS
-	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
-	exynos4_fimd0_gpio_setup_24bpp();
-#else
-	s5p_fimd0_set_platdata(&universal_lcd_pdata);
-#endif
-
-	universal_touchkey_init();
-	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
-			ARRAY_SIZE(i2c_gpio12_devs));
-
-	s3c_hsotg_set_platdata(&universal_hsotg_pdata);
-	universal_camera_init();
-
-	/* Last */
-	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
-}
-
-MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
-	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(exynos_smp_ops),
-	.init_irq	= exynos4_init_irq,
-	.map_io		= universal_map_io,
-	.init_machine	= universal_machine_init,
-	.init_late	= exynos_init_late,
-	.init_time	= exynos_init_time,
-	.reserve        = &universal_reserve,
-	.restart	= exynos4_restart,
-MACHINE_END