Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (236 commits)
  [ARM] 5300/1: fixup spitz reset during boot
  [ARM] 5295/1: make ZONE_DMA optional
  [ARM] 5239/1: Palm Zire 72 power management support
  [ARM] 5298/1: Drop desc_handle_irq()
  [ARM] 5297/1: [KS8695] Fix two compile-time warnings
  [ARM] 5296/1: [KS8695] Replace macro's with trailing underscores.
  [ARM] pxa: allow multi-machine PCMCIA builds
  [ARM] pxa: add preliminary CPUFREQ support for PXA3xx
  [ARM] pxa: add missing ACCR bit definitions to pxa3xx-regs.h
  [ARM] pxa: rename cpu-pxa.c to cpufreq-pxa2xx.c
  [ARM] pxa/zylonite: add support for USB OHCI
  [ARM] ohci-pxa27x: use ioremap() and offset for register access
  [ARM] ohci-pxa27x: introduce pxa27x_clear_otgph()
  [ARM] ohci-pxa27x: use platform_get_{irq,resource} for the resource
  [ARM] ohci-pxa27x: move OHCI controller specific registers into the driver
  [ARM] ohci-pxa27x: introduce flags to avoid direct access to OHCI registers
  [ARM] pxa: move I2S register and bit definitions into pxa2xx-i2s.c
  [ARM] pxa: simplify DMA register definitions
  [ARM] pxa: make additional DCSR bits valid for PXA3xx
  [ARM] pxa: move i2c register and bit definitions into i2c-pxa.c
  ...

Fixed up conflicts in
	arch/arm/mach-versatile/core.c
	sound/soc/pxa/pxa2xx-ac97.c
	sound/soc/pxa/pxa2xx-i2s.c
manually.

1 files changed, 4 insertions, 468 deletions

diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index af003a26953..a82dad1a8cc 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -14,46 +14,22 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 
-#include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
-#include <linux/leds.h>
 
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa27x.h>
-#include <mach/pxa-regs.h>
-#include <mach/audio.h>
-#include <mach/pxafb.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
-#include <mach/bitfield.h>
-
-#include <asm/hardware/it8152.h>
 
 #include "generic.h"
-#include "cm-x270-pci.h"
-
-/* virtual addresses for statically mapped regions */
-#define CMX270_VIRT_BASE	(0xe8000000)
-#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
 
+/* physical address if local-bus attached devices */
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
-#define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
 
 /* GPIO IRQ usage */
-#define GPIO10_ETHIRQ		(10)
-#define GPIO22_IT8152_IRQ	(22)
 #define GPIO83_MMC_IRQ		(83)
-#define GPIO95_GFXIRQ		(95)
 
-#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
-#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
 #define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
-#define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
 
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
@@ -157,62 +133,6 @@ static unsigned long cmx270_pin_config[] = {
 	GPIO83_GPIO,	/* MMC card detect */
 };
 
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource cmx270_dm9000_resource[] = {
-	[0] = {
-		.start = DM9000_PHYS_BASE,
-		.end   = DM9000_PHYS_BASE + 4,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DM9000_PHYS_BASE + 8,
-		.end   = DM9000_PHYS_BASE + 8 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = CMX270_ETHIRQ,
-		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
-
-static struct dm9000_plat_data cmx270_dm9000_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
-};
-
-static struct platform_device cmx270_dm9000_device = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
-	.resource	= cmx270_dm9000_resource,
-	.dev		= {
-		.platform_data = &cmx270_dm9000_platdata,
-	}
-};
-
-static void __init cmx270_init_dm9000(void)
-{
-	platform_device_register(&cmx270_dm9000_device);
-}
-#else
-static inline void cmx270_init_dm9000(void) {}
-#endif
-
-/* UCB1400 touchscreen controller */
-#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
-static struct platform_device cmx270_ts_device = {
-	.name		= "ucb1400_ts",
-	.id		= -1,
-};
-
-static void __init cmx270_init_touchscreen(void)
-{
-	platform_device_register(&cmx270_ts_device);
-}
-#else
-static inline void cmx270_init_touchscreen(void) {}
-#endif
-
 /* V3020 RTC */
 #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
@@ -242,45 +162,7 @@ static void __init cmx270_init_rtc(void)
 	platform_device_register(&cmx270_rtc_device);
 }
 #else
-static inline void cmx270_init_rtc(void) {}
-#endif
-
-/* CM-X270 LEDs */
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-static struct gpio_led cmx270_leds[] = {
-	[0] = {
-		.name = "cm-x270:red",
-		.default_trigger = "nand-disk",
-		.gpio = 93,
-		.active_low = 1,
-	},
-	[1] = {
-		.name = "cm-x270:green",
-		.default_trigger = "heartbeat",
-		.gpio = 94,
-		.active_low = 1,
-	},
-};
-
-static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
-	.num_leds = ARRAY_SIZE(cmx270_leds),
-	.leds = cmx270_leds,
-};
-
-static struct platform_device cmx270_led_device = {
-	.name		= "leds-gpio",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &cmx270_gpio_led_pdata,
-	},
-};
-
-static void __init cmx270_init_leds(void)
-{
-	platform_device_register(&cmx270_led_device);
-}
-#else
-static inline void cmx270_init_leds(void) {}
+static inline void cmx2xx_init_rtc(void) {}
 #endif
 
 /* 2700G graphics */
@@ -373,238 +255,11 @@ static void __init cmx270_init_2700G(void)
 static inline void cmx270_init_2700G(void) {}
 #endif
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-/*
-  Display definitions
-  keep these for backwards compatibility, although symbolic names (as
-  e.g. in lpd270.c) looks better
-*/
-#define MTYPE_STN320x240	0
-#define MTYPE_TFT640x480	1
-#define MTYPE_CRT640x480	2
-#define MTYPE_CRT800x600	3
-#define MTYPE_TFT320x240	6
-#define MTYPE_STN640x480	7
-
-static struct pxafb_mode_info generic_stn_320x240_mode = {
-	.pixclock	= 76923,
-	.bpp		= 8,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 3,
-	.vsync_len	= 2,
-	.left_margin	= 3,
-	.upper_margin	= 0,
-	.right_margin	= 3,
-	.lower_margin	= 0,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_320x240 = {
-	.modes		= &generic_stn_320x240_mode,
-	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x03) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 60,
-	.vsync_len	= 2,
-	.left_margin	= 70,
-	.upper_margin	= 10,
-	.right_margin	= 70,
-	.lower_margin	= 5,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_640x480 = {
-	.modes		= &generic_tft_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 81,
-	.upper_margin	= 33,
-	.right_margin	= 16,
-	.lower_margin	= 10,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_640x480 = {
-	.modes		= &generic_crt_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_800x600_mode = {
-	.pixclock	= 28846,
-	.bpp		= 8,
-	.xres		= 800,
-	.yres	  	= 600,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 26,
-	.upper_margin	= 21,
-	.right_margin	= 26,
-	.lower_margin	= 11,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_800x600 = {
-	.modes		= &generic_crt_800x600_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_320x240_mode = {
-	.pixclock	= 134615,
-	.bpp		= 16,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 63,
-	.vsync_len	= 7,
-	.left_margin	= 75,
-	.upper_margin	= 0,
-	.right_margin	= 15,
-	.lower_margin	= 15,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_320x240 = {
-	.modes		= &generic_tft_320x240_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x06) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_stn_640x480_mode = {
-	.pixclock	= 57692,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 4,
-	.vsync_len	= 2,
-	.left_margin	= 10,
-	.upper_margin	= 5,
-	.right_margin	= 10,
-	.lower_margin	= 5,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_640x480 = {
-	.modes		= &generic_stn_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
-
-static int __init cmx270_set_display(char *str)
-{
-	int disp_type = simple_strtol(str, NULL, 0);
-	switch (disp_type) {
-	case MTYPE_STN320x240:
-		cmx270_display = &generic_stn_320x240;
-		break;
-	case MTYPE_TFT640x480:
-		cmx270_display = &generic_tft_640x480;
-		break;
-	case MTYPE_CRT640x480:
-		cmx270_display = &generic_crt_640x480;
-		break;
-	case MTYPE_CRT800x600:
-		cmx270_display = &generic_crt_800x600;
-		break;
-	case MTYPE_TFT320x240:
-		cmx270_display = &generic_tft_320x240;
-		break;
-	case MTYPE_STN640x480:
-		cmx270_display = &generic_stn_640x480;
-		break;
-	default: /* fallback to CRT 640x480 */
-		cmx270_display = &generic_crt_640x480;
-		break;
-	}
-	return 1;
-}
-
-/*
-   This should be done really early to get proper configuration for
-   frame buffer.
-   Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
-   has limitied line length for kernel command line, and also it will
-   break compatibitlty with proprietary releases already in field.
-*/
-__setup("monitor=", cmx270_set_display);
-
-static void __init cmx270_init_display(void)
-{
-	set_pxa_fb_info(cmx270_display);
-}
-#else
-static inline void cmx270_init_display(void) {}
-#endif
-
 /* PXA27x OHCI controller setup */
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static int cmx270_ohci_init(struct device *dev)
-{
-	/* Set the Power Control Polarity Low */
-	UHCHR = (UHCHR | UHCHR_PCPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= cmx270_ohci_init,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 };
 
 static void __init cmx270_init_ohci(void)
@@ -676,131 +331,12 @@ static void __init cmx270_init_mmc(void)
 static inline void cmx270_init_mmc(void) {}
 #endif
 
-#ifdef CONFIG_PM
-static unsigned long sleep_save_msc[10];
-
-static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
-{
-	cmx270_pci_suspend();
-
-	/* save MSC registers */
-	sleep_save_msc[0] = MSC0;
-	sleep_save_msc[1] = MSC1;
-	sleep_save_msc[2] = MSC2;
-
-	/* setup power saving mode registers */
-	PCFR = 0x0;
-	PSLR = 0xff400000;
-	PMCR  = 0x00000005;
-	PWER  = 0x80000000;
-	PFER  = 0x00000000;
-	PRER  = 0x00000000;
-	PGSR0 = 0xC0018800;
-	PGSR1 = 0x004F0002;
-	PGSR2 = 0x6021C000;
-	PGSR3 = 0x00020000;
-
-	return 0;
-}
-
-static int cmx270_resume(struct sys_device *dev)
-{
-	cmx270_pci_resume();
-
-	/* restore MSC registers */
-	MSC0 = sleep_save_msc[0];
-	MSC1 = sleep_save_msc[1];
-	MSC2 = sleep_save_msc[2];
-
-	return 0;
-}
-
-static struct sysdev_class cmx270_pm_sysclass = {
-	.name = "pm",
-	.resume = cmx270_resume,
-	.suspend = cmx270_suspend,
-};
-
-static struct sys_device cmx270_pm_device = {
-	.cls = &cmx270_pm_sysclass,
-};
-
-static int __init cmx270_pm_init(void)
-{
-	int error;
-	error = sysdev_class_register(&cmx270_pm_sysclass);
-	if (error == 0)
-		error = sysdev_register(&cmx270_pm_device);
-	return error;
-}
-#else
-static int __init cmx270_pm_init(void) { return 0; }
-#endif
-
-#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
-static void __init cmx270_init_ac97(void)
-{
-	pxa_set_ac97_info(NULL);
-}
-#else
-static inline void cmx270_init_ac97(void) {}
-#endif
-
-static void __init cmx270_init(void)
+void __init cmx270_init(void)
 {
-	cmx270_pm_init();
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
-	cmx270_init_dm9000();
 	cmx270_init_rtc();
-	cmx270_init_display();
 	cmx270_init_mmc();
 	cmx270_init_ohci();
-	cmx270_init_ac97();
-	cmx270_init_touchscreen();
-	cmx270_init_leds();
 	cmx270_init_2700G();
 }
-
-static void __init cmx270_init_irq(void)
-{
-	pxa27x_init_irq();
-
-	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
-}
-
-#ifdef CONFIG_PCI
-/* Map PCI companion statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
-
-static void __init cmx270_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
-
-	it8152_base_address = CMX270_IT8152_VIRT;
-}
-#else
-static void __init cmx270_map_io(void)
-{
-	pxa_map_io();
-}
-#endif
-
-MACHINE_START(ARMCORE, "Compulab CM-x270")
-	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= cmx270_map_io,
-	.init_irq	= cmx270_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= cmx270_init,
-MACHINE_END