Merge tag 'omap-for-v3.8/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/pm

From Tony Lindgren <tony@atomide.com>:

PM updates for omaps via Kevin Hilman <khilman@deeprootsystems.com>:

- Minor pr_warn() cleanup for OMAP2+ Voltage Processor (VP)

- OMAP: SmartReflex: pass device-independent data via platform_data

- OMAP voltage layer updates towards supporting auto-retention/auto-off

* tag 'omap-for-v3.8/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: OPP: add OMAP4460 definitions
  ARM: OMAP4: TWL: enable high speed mode for PMIC communication
  ARM: OMAP4: VC: setup I2C parameters based on board data
  ARM: OMAP4: vc: fix channel configuration
  ARM: OMAP3+: voltage: remove unused volt_setup_time parameter
  ARM: OMAP: TWL: change the vddmin / vddmax voltages to spec
  ARM: OMAP3+: voltage: use oscillator data to calculate setup times
  ARM: OMAP3+: vp: use new vp_params for calculating vddmin and vddmax
  ARM: OMAP: add support for oscillator setup
  ARM: OMAP4: VC: calculate ramp times
  ARM: OMAP4: voltage: add support for VOLTSETUP_x_OFF register
  ARM: OMAP3: VC: calculate ramp times
  ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
  ARM: OMAP: voltage: renamed vp_vddmin and vp_vddmax fields
  ARM: OMAP3+: PM: VP: use uV for max and min voltage limits
  ARM: OMAP2+: PM: VP: minor pr_warn updates
  ARM: OMAP: SmartReflex: pass device dependent data via platform data
  ARM: OMAP: hwmod: align the SmartReflex fck names

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 14 insertions, 59 deletions

diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index f515a1a056d..7ff9667d976 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -30,16 +30,6 @@
 #define OMAP3_VP_VSTEPMAX_VSTEPMAX	0x04
 #define OMAP3_VP_VLIMITTO_TIMEOUT_US	200
 
-#define OMAP3430_VP1_VLIMITTO_VDDMIN	0x14
-#define OMAP3430_VP1_VLIMITTO_VDDMAX	0x42
-#define OMAP3430_VP2_VLIMITTO_VDDMIN	0x18
-#define OMAP3430_VP2_VLIMITTO_VDDMAX	0x2c
-
-#define OMAP3630_VP1_VLIMITTO_VDDMIN	0x18
-#define OMAP3630_VP1_VLIMITTO_VDDMAX	0x3c
-#define OMAP3630_VP2_VLIMITTO_VDDMIN	0x18
-#define OMAP3630_VP2_VLIMITTO_VDDMAX	0x30
-
 #define OMAP4_SRI2C_SLAVE_ADDR		0x12
 #define OMAP4_VDD_MPU_SR_VOLT_REG	0x55
 #define OMAP4_VDD_MPU_SR_CMD_REG	0x56
@@ -53,13 +43,6 @@
 #define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
 #define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
 
-#define OMAP4_VP_MPU_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_MPU_VLIMITTO_VDDMAX	0x39
-#define OMAP4_VP_IVA_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_IVA_VLIMITTO_VDDMAX	0x2D
-#define OMAP4_VP_CORE_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_CORE_VLIMITTO_VDDMAX	0x28
-
 static bool is_offset_valid;
 static u8 smps_offset;
 /*
@@ -158,16 +141,11 @@ static u8 twl6030_uv_to_vsel(unsigned long uv)
 static struct omap_voltdm_pmic omap3_mpu_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12500,
-	.on_volt		= 1200000,
-	.onlp_volt		= 1000000,
-	.ret_volt		= 975000,
-	.off_volt		= 600000,
-	.volt_setup_time	= 0xfff,
 	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP3430_VP1_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP3430_VP1_VLIMITTO_VDDMAX,
+	.vddmin			= 600000,
+	.vddmax			= 1450000,
 	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP3_VDD_MPU_SR_CONTROL_REG,
@@ -179,16 +157,11 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = {
 static struct omap_voltdm_pmic omap3_core_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12500,
-	.on_volt                = 1200000,
-	.onlp_volt              = 1000000,
-	.ret_volt               = 975000,
-	.off_volt               = 600000,
-	.volt_setup_time        = 0xfff,
 	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP3430_VP2_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP3430_VP2_VLIMITTO_VDDMAX,
+	.vddmin			= 600000,
+	.vddmax			= 1450000,
 	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP3_VDD_CORE_SR_CONTROL_REG,
@@ -200,21 +173,17 @@ static struct omap_voltdm_pmic omap3_core_pmic = {
 static struct omap_voltdm_pmic omap4_mpu_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1375000,
-	.onlp_volt		= 1375000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_MPU_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_MPU_VLIMITTO_VDDMAX,
+	.vddmin			= 0,
+	.vddmax			= 2100000,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP4_VDD_MPU_SR_VOLT_REG,
 	.cmd_reg_addr		= OMAP4_VDD_MPU_SR_CMD_REG,
 	.i2c_high_speed		= true,
+	.i2c_pad_load		= 3,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
@@ -222,21 +191,17 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = {
 static struct omap_voltdm_pmic omap4_iva_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1188000,
-	.onlp_volt		= 1188000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_IVA_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_IVA_VLIMITTO_VDDMAX,
+	.vddmin			= 0,
+	.vddmax			= 2100000,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP4_VDD_IVA_SR_VOLT_REG,
 	.cmd_reg_addr		= OMAP4_VDD_IVA_SR_CMD_REG,
 	.i2c_high_speed		= true,
+	.i2c_pad_load		= 3,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
@@ -244,20 +209,17 @@ static struct omap_voltdm_pmic omap4_iva_pmic = {
 static struct omap_voltdm_pmic omap4_core_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1200000,
-	.onlp_volt		= 1200000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_CORE_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_CORE_VLIMITTO_VDDMAX,
+	.vddmin			= 0,
+	.vddmax			= 2100000,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP4_VDD_CORE_SR_VOLT_REG,
 	.cmd_reg_addr		= OMAP4_VDD_CORE_SR_CMD_REG,
+	.i2c_high_speed		= true,
+	.i2c_pad_load		= 3,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
@@ -288,13 +250,6 @@ int __init omap3_twl_init(void)
 	if (!cpu_is_omap34xx())
 		return -ENODEV;
 
-	if (cpu_is_omap3630()) {
-		omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
-		omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
-		omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
-		omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
-	}
-
 	/*
 	 * The smartreflex bit on twl4030 specifies if the setting of voltage
 	 * is done over the I2C_SR path. Since this setting is independent of