Merge remote-tracking branch 'efi/chainsaw' into x86/efi

Resolved Conflicts:
	drivers/firmware/efivars.c
	fs/efivarsfs/file.c

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

1 files changed, 17 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 3ae852a522f..d43d9b608ed 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -451,6 +451,14 @@ struct omap_hwmod_omap4_prcm {
  *     enabled.  This prevents the hwmod code from being able to
  *     enable and reset the IP block early.  XXX Eventually it should
  *     be possible to query the clock framework for this information.
+ * HWMOD_BLOCK_WFI: Some OMAP peripherals apparently don't work
+ *     correctly if the MPU is allowed to go idle while the
+ *     peripherals are active.  This is apparently true for the I2C on
+ *     OMAP2420, and also the EMAC on AM3517/3505.  It's unlikely that
+ *     this is really true -- we're probably not configuring something
+ *     correctly, or this is being abused to deal with some PM latency
+ *     issues -- but we're currently suffering from a shortage of
+ *     folks who are able to track these issues down properly.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -462,6 +470,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
 #define HWMOD_16BIT_REG				(1 << 8)
 #define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
+#define HWMOD_BLOCK_WFI				(1 << 10)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -501,6 +510,7 @@ struct omap_hwmod_omap4_prcm {
  * @rev: revision of the IP class
  * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
  * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
+ * @enable_preprogram:  ptr to fn to be executed during device enable
  *
  * Represent the class of a OMAP hardware "modules" (e.g. timer,
  * smartreflex, gpio, uart...)
@@ -524,6 +534,7 @@ struct omap_hwmod_class {
 	u32					rev;
 	int					(*pre_shutdown)(struct omap_hwmod *oh);
 	int					(*reset)(struct omap_hwmod *oh);
+	int					(*enable_preprogram)(struct omap_hwmod *oh);
 };
 
 /**
@@ -671,6 +682,12 @@ extern void __init omap_hwmod_init(void);
 const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
 
 /*
+ *
+ */
+
+extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
+
+/*
  * Chip variant-specific hwmod init routines - XXX should be converted
  * to use initcalls once the initial boot ordering is straightened out
  */