ARM: mxs: move timer driver into drivers/clocksource

Move mxs timer driver into drivers/clocksource as mxs_timer.c.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

2 files changed, 1 insertions, 305 deletions

diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 3d3c8a97306..76c336e6f5b 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,5 +1,5 @@
 # Common support
-obj-y := icoll.o ocotp.o system.o timer.o mm.o
+obj-y := icoll.o ocotp.o system.o mm.o
 
 obj-$(CONFIG_PM) += pm.o
 
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
deleted file mode 100644
index a4d469b21d9..00000000000
--- a/arch/arm/mach-mxs/timer.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- *  Copyright (C) 2000-2001 Deep Blue Solutions
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *  Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *  Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/err.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/stmp_device.h>
-
-#include <asm/mach/time.h>
-#include <asm/sched_clock.h>
-
-/*
- * There are 2 versions of the timrot on Freescale MXS-based SoCs.
- * The v1 on MX23 only gets 16 bits counter, while v2 on MX28
- * extends the counter to 32 bits.
- *
- * The implementation uses two timers, one for clock_event and
- * another for clocksource. MX28 uses timrot 0 and 1, while MX23
- * uses 0 and 2.
- */
-
-#define MX23_TIMROT_VERSION_OFFSET	0x0a0
-#define MX28_TIMROT_VERSION_OFFSET	0x120
-#define BP_TIMROT_MAJOR_VERSION		24
-#define BV_TIMROT_VERSION_1		0x01
-#define BV_TIMROT_VERSION_2		0x02
-#define timrot_is_v1()	(timrot_major_version == BV_TIMROT_VERSION_1)
-
-/*
- * There are 4 registers for each timrotv2 instance, and 2 registers
- * for each timrotv1. So address step 0x40 in macros below strides
- * one instance of timrotv2 while two instances of timrotv1.
- *
- * As the result, HW_TIMROT_XXXn(1) defines the address of timrot1
- * on MX28 while timrot2 on MX23.
- */
-/* common between v1 and v2 */
-#define HW_TIMROT_ROTCTRL		0x00
-#define HW_TIMROT_TIMCTRLn(n)		(0x20 + (n) * 0x40)
-/* v1 only */
-#define HW_TIMROT_TIMCOUNTn(n)		(0x30 + (n) * 0x40)
-/* v2 only */
-#define HW_TIMROT_RUNNING_COUNTn(n)	(0x30 + (n) * 0x40)
-#define HW_TIMROT_FIXED_COUNTn(n)	(0x40 + (n) * 0x40)
-
-#define BM_TIMROT_TIMCTRLn_RELOAD	(1 << 6)
-#define BM_TIMROT_TIMCTRLn_UPDATE	(1 << 7)
-#define BM_TIMROT_TIMCTRLn_IRQ_EN	(1 << 14)
-#define BM_TIMROT_TIMCTRLn_IRQ		(1 << 15)
-#define BP_TIMROT_TIMCTRLn_SELECT	0
-#define BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL		0x8
-#define BV_TIMROTv2_TIMCTRLn_SELECT__32KHZ_XTAL		0xb
-#define BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS	0xf
-
-static struct clock_event_device mxs_clockevent_device;
-static enum clock_event_mode mxs_clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-static void __iomem *mxs_timrot_base;
-static u32 timrot_major_version;
-
-static inline void timrot_irq_disable(void)
-{
-	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
-		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
-}
-
-static inline void timrot_irq_enable(void)
-{
-	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ_EN, mxs_timrot_base +
-		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_SET);
-}
-
-static void timrot_irq_acknowledge(void)
-{
-	__raw_writel(BM_TIMROT_TIMCTRLn_IRQ, mxs_timrot_base +
-		     HW_TIMROT_TIMCTRLn(0) + STMP_OFFSET_REG_CLR);
-}
-
-static cycle_t timrotv1_get_cycles(struct clocksource *cs)
-{
-	return ~((__raw_readl(mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1))
-			& 0xffff0000) >> 16);
-}
-
-static int timrotv1_set_next_event(unsigned long evt,
-					struct clock_event_device *dev)
-{
-	/* timrot decrements the count */
-	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_TIMCOUNTn(0));
-
-	return 0;
-}
-
-static int timrotv2_set_next_event(unsigned long evt,
-					struct clock_event_device *dev)
-{
-	/* timrot decrements the count */
-	__raw_writel(evt, mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(0));
-
-	return 0;
-}
-
-static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
-{
-	struct clock_event_device *evt = dev_id;
-
-	timrot_irq_acknowledge();
-	evt->event_handler(evt);
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction mxs_timer_irq = {
-	.name		= "MXS Timer Tick",
-	.dev_id		= &mxs_clockevent_device,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= mxs_timer_interrupt,
-};
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[] const = {
-	[CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
-	[CLOCK_EVT_MODE_ONESHOT]  = "CLOCK_EVT_MODE_ONESHOT",
-	[CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
-	[CLOCK_EVT_MODE_UNUSED]   = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /* DEBUG */
-
-static void mxs_set_mode(enum clock_event_mode mode,
-				struct clock_event_device *evt)
-{
-	/* Disable interrupt in timer module */
-	timrot_irq_disable();
-
-	if (mode != mxs_clockevent_mode) {
-		/* Set event time into the furthest future */
-		if (timrot_is_v1())
-			__raw_writel(0xffff,
-				mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
-		else
-			__raw_writel(0xffffffff,
-				mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
-
-		/* Clear pending interrupt */
-		timrot_irq_acknowledge();
-	}
-
-#ifdef DEBUG
-	pr_info("%s: changing mode from %s to %s\n", __func__,
-		clock_event_mode_label[mxs_clockevent_mode],
-		clock_event_mode_label[mode]);
-#endif /* DEBUG */
-
-	/* Remember timer mode */
-	mxs_clockevent_mode = mode;
-
-	switch (mode) {
-	case CLOCK_EVT_MODE_PERIODIC:
-		pr_err("%s: Periodic mode is not implemented\n", __func__);
-		break;
-	case CLOCK_EVT_MODE_ONESHOT:
-		timrot_irq_enable();
-		break;
-	case CLOCK_EVT_MODE_SHUTDOWN:
-	case CLOCK_EVT_MODE_UNUSED:
-	case CLOCK_EVT_MODE_RESUME:
-		/* Left event sources disabled, no more interrupts appear */
-		break;
-	}
-}
-
-static struct clock_event_device mxs_clockevent_device = {
-	.name		= "mxs_timrot",
-	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.set_mode	= mxs_set_mode,
-	.set_next_event	= timrotv2_set_next_event,
-	.rating		= 200,
-};
-
-static int __init mxs_clockevent_init(struct clk *timer_clk)
-{
-	if (timrot_is_v1())
-		mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
-	mxs_clockevent_device.cpumask = cpumask_of(0);
-	clockevents_config_and_register(&mxs_clockevent_device,
-					clk_get_rate(timer_clk),
-					timrot_is_v1() ? 0xf : 0x2,
-					timrot_is_v1() ? 0xfffe : 0xfffffffe);
-
-	return 0;
-}
-
-static struct clocksource clocksource_mxs = {
-	.name		= "mxs_timer",
-	.rating		= 200,
-	.read		= timrotv1_get_cycles,
-	.mask		= CLOCKSOURCE_MASK(16),
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static u32 notrace mxs_read_sched_clock_v2(void)
-{
-	return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
-}
-
-static int __init mxs_clocksource_init(struct clk *timer_clk)
-{
-	unsigned int c = clk_get_rate(timer_clk);
-
-	if (timrot_is_v1())
-		clocksource_register_hz(&clocksource_mxs, c);
-	else {
-		clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
-			"mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
-		setup_sched_clock(mxs_read_sched_clock_v2, 32, c);
-	}
-
-	return 0;
-}
-
-static void __init mxs_timer_init(struct device_node *np)
-{
-	struct clk *timer_clk;
-	int irq;
-
-	mxs_timrot_base = of_iomap(np, 0);
-	WARN_ON(!mxs_timrot_base);
-
-	timer_clk = of_clk_get(np, 0);
-	if (IS_ERR(timer_clk)) {
-		pr_err("%s: failed to get clk\n", __func__);
-		return;
-	}
-
-	clk_prepare_enable(timer_clk);
-
-	/*
-	 * Initialize timers to a known state
-	 */
-	stmp_reset_block(mxs_timrot_base + HW_TIMROT_ROTCTRL);
-
-	/* get timrot version */
-	timrot_major_version = __raw_readl(mxs_timrot_base +
-			(of_device_is_compatible(np, "fsl,imx23-timrot") ?
-						MX23_TIMROT_VERSION_OFFSET :
-						MX28_TIMROT_VERSION_OFFSET));
-	timrot_major_version >>= BP_TIMROT_MAJOR_VERSION;
-
-	/* one for clock_event */
-	__raw_writel((timrot_is_v1() ?
-			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
-			BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
-			BM_TIMROT_TIMCTRLn_UPDATE |
-			BM_TIMROT_TIMCTRLn_IRQ_EN,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(0));
-
-	/* another for clocksource */
-	__raw_writel((timrot_is_v1() ?
-			BV_TIMROTv1_TIMCTRLn_SELECT__32KHZ_XTAL :
-			BV_TIMROTv2_TIMCTRLn_SELECT__TICK_ALWAYS) |
-			BM_TIMROT_TIMCTRLn_RELOAD,
-			mxs_timrot_base + HW_TIMROT_TIMCTRLn(1));
-
-	/* set clocksource timer fixed count to the maximum */
-	if (timrot_is_v1())
-		__raw_writel(0xffff,
-			mxs_timrot_base + HW_TIMROT_TIMCOUNTn(1));
-	else
-		__raw_writel(0xffffffff,
-			mxs_timrot_base + HW_TIMROT_FIXED_COUNTn(1));
-
-	/* init and register the timer to the framework */
-	mxs_clocksource_init(timer_clk);
-	mxs_clockevent_init(timer_clk);
-
-	/* Make irqs happen */
-	irq = irq_of_parse_and_map(np, 0);
-	setup_irq(irq, &mxs_timer_irq);
-}
-CLOCKSOURCE_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init)