Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
 "While we generally attempt to get rid of board specific files and
  replace them with device tree based descriptions, a lot of platforms
  have not come that far:

  In shmobile, we add two new board files because their recently started
  effort to add DT support has not proceeded enough to use it for all of
  the important hardware.

  In Kirkwood, we are adding support for new boards with a combination
  of DT and board file contents in multiple cases.

  pxa/mmp and imx are extending support for existing board files but not
  adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: shmobile: fix smp build
  ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
  kirkwood: Add iconnect support
  orion/kirkwood: create a generic function for gpio led blinking
  kirkwood/orion: fix orion_gpio_set_blink
  ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
  kirkwood: Allow nand to be configured via. devicetree
  mtd: Add orion_nand devicetree bindings
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
  ARM: pxa: Use REGULATOR_SUPPLY macro
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ...

1 files changed, 0 insertions, 301 deletions

diff --git a/arch/arm/mach-imx/mach-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c
deleted file mode 100644
index 944025da833..00000000000
--- a/arch/arm/mach-imx/mach-cpuimx51.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-
-#define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
-#define CPUIMX51_QUARTB_GPIO	IMX_GPIO_NR(3, 25)
-#define CPUIMX51_QUARTC_GPIO	IMX_GPIO_NR(3, 26)
-#define CPUIMX51_QUARTD_GPIO	IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUART_XTAL	14745600
-#define CPUIMX51_QUART_REGSHIFT	17
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET		0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ		0x02
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&serial_device,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* I2C2 */
-	MX51_PAD_GPIO1_2__I2C2_SCL,
-	MX51_PAD_GPIO1_3__I2C2_SDA,
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* QUART IRQ */
-	MX51_PAD_NANDF_D15__GPIO3_25,
-	MX51_PAD_NANDF_D14__GPIO3_26,
-	MX51_PAD_NANDF_D13__GPIO3_27,
-	MX51_PAD_NANDF_D12__GPIO3_28,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	MX51_PAD_USBH1_STP__USBH1_STP,
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx51_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const
-struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx51_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
-					ARRAY_SIZE(eukrea_cpuimx51_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
-
-	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
-	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
-	gpio_free(CPUIMX51_QUARTA_GPIO);
-	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
-	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
-	gpio_free(CPUIMX51_QUARTB_GPIO);
-	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
-	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
-	gpio_free(CPUIMX51_QUARTC_GPIO);
-	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
-	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
-	gpio_free(CPUIMX51_QUARTD_GPIO);
-
-	imx51_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
-	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
-	eukrea_mbimx51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
-	.init	= eukrea_cpuimx51_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
-	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mxc_timer,
-	.init_machine = eukrea_cpuimx51_init,
-	.restart	= mxc_restart,
-MACHINE_END