Merge tag 'mvebu-soc-3.15-2' of git://git.infradead.org/linux-mvebu into next/soc

Merge "mvebu soc changes for v3.15 (incremental pull #2)" from Jason Cooper:

 - mvebu
    - Add Armada 375, 380 and 385 SoCs

 - kirkwood
    - move kirkwood DT support to mach-mvebu
    - add mostly DT support for HP T5325 thin client

* tag 'mvebu-soc-3.15-2' of git://git.infradead.org/linux-mvebu:
  ARM: kirkwood: Add HP T5325 thin client
  ARM: kirkwood: select dtbs based on SoC
  ARM: kirkwood: Remove redundant kexec code
  ARM: mvebu: Armada 375/38x depend on MULTI_V7
  ARM: mvebu: Simplify headers and make local
  ARM: mvebu: Enable mvebu-soc-id on Kirkwood
  ARM: mvebu: Let kirkwood use the system controller for restart
  ARM: mvebu: Move kirkwood DT boards into mach-mvebu
  ARM: MM Enable building Feroceon L2 cache controller with ARCH_MVEBU
  ARM: Fix default CPU selection for ARCH_MULTI_V5
  ARM: MM: Add DT binding for Feroceon L2 cache
  ARM: orion: Move cache-feroceon-l2.h out of plat-orion
  ARM: mvebu: Add ARCH_MULTI_V7 to SoCs
  ARM: kirkwood: ioremap memory control register
  ARM: kirkwood: ioremap the cpu_config register before using it.
  ARM: kirkwood: Separate board-dt from common and pcie code.
  ARM: kirkwood: Drop printing the SoC type and revision
  ARM: kirkwood: Convert mv88f6281gtw_ge switch setup to DT
  ARM: kirkwood: Give pm.c its own header file.
  ARM: mvebu: Rename the ARCH_MVEBU menu option

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 67 insertions, 2 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4a89023f55a..87c99d3cfa3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -82,8 +82,8 @@ dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
 	integratorcp.dtb
-dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
-dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+kirkwood := \
+	kirkwood-cloudbox.dtb \
 	kirkwood-db-88f6281.dtb \
 	kirkwood-db-88f6282.dtb \
 	kirkwood-dns320.dtb \
@@ -117,6 +117,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
 	kirkwood-topkick.dtb \
 	kirkwood-ts219-6281.dtb \
 	kirkwood-ts219-6282.dtb
+dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood)
+dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
 dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index dc86429756d..2cb0dc52916 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -122,4 +122,66 @@
 			gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth0>;
+		dsa,mii-bus = <&ethphy0>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy0: ethernet-phy@ff {
+		reg = <0xff>; 	/* No phy attached */
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy0>;
+	};
 };