Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...

13 files changed, 80 insertions, 560 deletions

diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README
index 8f08a86e03b..da0151db996 100644
--- a/Documentation/arm/Marvell/README
+++ b/Documentation/arm/Marvell/README
@@ -88,6 +88,7 @@ EBU Armada family
         MV78230
         MV78260
         MV78460
+    NOTE: not to be confused with the non-SMP 78xx0 SoCs
 
   Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
   No public datasheet available.
diff --git a/Documentation/arm/sunxi/README b/Documentation/arm/sunxi/README
index e3f93fb9224..7945238453e 100644
--- a/Documentation/arm/sunxi/README
+++ b/Documentation/arm/sunxi/README
@@ -10,6 +10,10 @@ SunXi family
   Linux kernel mach directory: arch/arm/mach-sunxi
 
   Flavors:
+    * ARM926 based SoCs
+      - Allwinner F20 (sun3i)
+        + Not Supported
+
     * ARM Cortex-A8 based SoCs
       - Allwinner A10 (sun4i)
         + Datasheet
@@ -25,4 +29,24 @@ SunXi family
         + Datasheet
 	  http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
         + User Manual
-	  http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-08-08%29.pdf
+          http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
+
+    * Dual ARM Cortex-A7 based SoCs
+      - Allwinner A20 (sun7i)
+        + User Manual
+          http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
+
+      - Allwinner A23
+        + Not Supported
+
+    * Quad ARM Cortex-A7 based SoCs
+      - Allwinner A31 (sun6i)
+        + Datasheet
+          http://dl.linux-sunxi.org/A31/A31%20Datasheet%20-%20v1.00%20(2012-12-24).pdf
+
+      - Allwinner A31s (sun6i)
+        + Not Supported
+
+    * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
+      - Allwinner A80
+        + Not Supported
\ No newline at end of file
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index db5858e32d3..5fac246a953 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -9,9 +9,53 @@ Required properties (in root node):
 
 FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
 
-In the root node the Integrator/CP must have a /cpcon node pointing
-to the CP control registers, and the Integrator/AP must have a
-/syscon node pointing to the Integrator/AP system controller.
+Required nodes:
+
+- core-module: the root node to the Integrator platforms must have
+  a core-module with regs and the compatible string
+  "arm,core-module-integrator"
+
+  Required properties for the core module:
+  - regs: the location and size of the core module registers, one
+    range of 0x200 bytes.
+
+- syscon: the root node of the Integrator platforms must have a
+  system controller node pointong to the control registers,
+  with the compatible string
+  "arm,integrator-ap-syscon"
+  "arm,integrator-cp-syscon"
+  respectively.
+
+  Required properties for the system controller:
+  - regs: the location and size of the system controller registers,
+    one range of 0x100 bytes.
+
+  Required properties for the AP system controller:
+  - interrupts: the AP syscon node must include the logical module
+    interrupts, stated in order of module instance <module 0>,
+    <module 1>, <module 2> ... for the CP system controller this
+    is not required not of any use.
+
+/dts-v1/;
+/include/ "integrator.dtsi"
+
+/ {
+	model = "ARM Integrator/AP";
+	compatible = "arm,integrator-ap";
+
+	core-module@10000000 {
+		compatible = "arm,core-module-integrator";
+		reg = <0x10000000 0x200>;
+	};
+
+	syscon {
+		compatible = "arm,integrator-ap-syscon";
+		reg = <0x11000000 0x100>;
+		interrupt-parent = <&pic>;
+		/* These are the logic module IRQs */
+		interrupts = <9>, <10>, <11>, <12>;
+	};
+};
 
 
 ARM Versatile Application and Platform Baseboards
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index 5a90a724b52..6aab72bf67e 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -215,6 +215,11 @@ clocks and IDs.
 	cko2      		200
 	cko      		201
 	vdoa      		202
+	pll4_audio_div		203
+	lvds1_sel		204
+	lvds2_sel		205
+	lvds1_gate		206
+	lvds2_gate		207
 
 Examples:
 
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 00a5c26454e..91a748fed13 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -45,8 +45,8 @@ Additionally, "allwinner,*-gates-clk" clocks require:
 
 Clock consumers should specify the desired clocks they use with a
 "clocks" phandle cell. Consumers that are using a gated clock should
-provide an additional ID in their clock property. The values of this
-ID are documented in sunxi/<soc>-gates.txt.
+provide an additional ID in their clock property. This ID is the
+offset of the bit controlling this particular gate in the register.
 
 For example:
 
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt
deleted file mode 100644
index 6a03475bbfe..00000000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2*
-    EHCI1					3
-    OHCI1					4*
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-    MS						12**
-    NAND					13
-    SDRAM					14
-
-    ACE						16
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-    PATA					24
-    SATA					25**
-    GPS						26*
-
-    VE						32
-    TVD						33
-    TVE0					34
-    TVE1					35
-    LCD0					36
-    LCD1					37
-
-    CSI0					40
-    CSI1					41
-
-    HDMI					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    MP						50
-
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
-
-    CODEC					0
-    SPDIF					1*
-    AC97					2
-    IIS						3
-
-    PIO						5
-    IR0						6
-    IR1						7
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    CAN						4
-    SCR						5
-    PS20					6
-    PS21					7
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-    UART6					22
-    UART7					23
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt
deleted file mode 100644
index d24279fe142..00000000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun5i-a10s-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2
-
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-
-    NAND					13
-    SDRAM					14
-
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-
-    GPS						26
-
-    HSTIMER					28
-
-    VE						32
-
-    TVE						34
-
-    LCD						36
-
-    CSI						40
-
-    HDMI					43
-    DE_BE					44
-
-    DE_FE					46
-
-    IEP						51
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun5i-a10s-apb0-gates-clk")
-
-    CODEC					0
-
-    IIS						3
-
-    PIO						5
-    IR						6
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun5i-a10s-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt
deleted file mode 100644
index 006b6dfc470..00000000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun5i-a13-ahb-gates-clk")
-
-    USBOTG					0
-    EHCI					1
-    OHCI					2
-
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-
-    NAND					13
-    SDRAM					14
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-
-    STIMER					28
-
-    VE						32
-
-    LCD						36
-
-    CSI						40
-
-    DE_BE					44
-
-    DE_FE					46
-
-    IEP						51
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun5i-a13-apb0-gates-clk")
-
-    CODEC					0
-
-    PIO						5
-    IR						6
-
-  * APB1 gates ("allwinner,sun5i-a13-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-
-    UART1					17
-
-    UART3					19
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
deleted file mode 100644
index fe44932b5c6..00000000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
-
-    MIPI DSI					1
-
-    SS						5
-    DMA						6
-
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-
-    NAND1					12
-    NAND0					13
-    SDRAM					14
-
-    GMAC					17
-    TS						18
-    HSTIMER					19
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-    USB_OTG					24
-
-    EHCI0					26
-    EHCI1					27
-
-    OHCI0					29
-    OHCI1					30
-    OHCI2					31
-    VE						32
-
-    LCD0					36
-    LCD1					37
-
-    CSI						40
-
-    HDMI					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    MP						50
-
-    GPU						52
-
-    DEU0					55
-    DEU1					56
-    DRC0					57
-    DRC1					58
-
-  * APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
-
-    CODEC					0
-
-    DIGITAL MIC					4
-    PIO						5
-
-    DAUDIO0					12
-    DAUDIO1					13
-
-  * APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-    I2C3					3
-
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt b/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
deleted file mode 100644
index 357f4fdc02e..00000000000
--- a/Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-Gate clock outputs
-------------------
-
-  * AXI gates ("allwinner,sun4i-axi-gates-clk")
-
-    DRAM					0
-
-  * AHB gates ("allwinner,sun7i-a20-ahb-gates-clk")
-
-    USB0					0
-    EHCI0					1
-    OHCI0					2
-    EHCI1					3
-    OHCI1					4
-    SS						5
-    DMA						6
-    BIST					7
-    MMC0					8
-    MMC1					9
-    MMC2					10
-    MMC3					11
-    MS						12
-    NAND					13
-    SDRAM					14
-
-    ACE						16
-    EMAC					17
-    TS						18
-
-    SPI0					20
-    SPI1					21
-    SPI2					22
-    SPI3					23
-
-    SATA					25
-
-    HSTIMER					28
-
-    VE						32
-    TVD						33
-    TVE0					34
-    TVE1					35
-    LCD0					36
-    LCD1					37
-
-    CSI0					40
-    CSI1					41
-
-    HDMI1					42
-    HDMI0					43
-    DE_BE0					44
-    DE_BE1					45
-    DE_FE1					46
-    DE_FE1					47
-
-    GMAC					49
-    MP						50
-
-    MALI400					52
-
-  * APB0 gates ("allwinner,sun7i-a20-apb0-gates-clk")
-
-    CODEC					0
-    SPDIF					1
-    AC97					2
-    IIS0					3
-    IIS1					4
-    PIO						5
-    IR0						6
-    IR1						7
-    IIS2					8
-
-    KEYPAD					10
-
-  * APB1 gates ("allwinner,sun7i-a20-apb1-gates-clk")
-
-    I2C0					0
-    I2C1					1
-    I2C2					2
-    I2C3					3
-    CAN						4
-    SCR						5
-    PS20					6
-    PS21					7
-
-    I2C4					15
-    UART0					16
-    UART1					17
-    UART2					18
-    UART3					19
-    UART4					20
-    UART5					21
-    UART6					22
-    UART7					23
-
-Notation:
- [*]:  The datasheet didn't mention these, but they are present on AW code
- [**]: The datasheet had this marked as "NC" but they are used on AW code
diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
index 57edb30dbbc..3d3b2b91e33 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
@@ -8,9 +8,6 @@ Required properties:
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source. The value shall be 1.
 
-For the valid interrupt sources for your SoC, see the documentation in
-sunxi/<soc>.txt
-
 Example:
 
 intc: interrupt-controller {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt b/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt
deleted file mode 100644
index 76b98c83449..00000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-Allwinner A10 (sun4i) interrupt sources
----------------------------------------
-
-The interrupt sources available for the Allwinner A10 SoC are the
-following one:
-
-0: ENMI
-1: UART0
-2: UART1
-3: UART2
-4: UART3
-5: IR0
-6: IR1
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-13: SPDIF
-14: AC97
-15: TS
-16: I2S
-17: UART4
-18: UART5
-19: UART6
-20: UART7
-21: KEYPAD
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-26: CAN
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: MMC0
-33: MMC1
-34: MMC2
-35: MMC3
-36: MEMSTICK
-37: NAND
-38: USB0
-39: USB1
-40: USB2
-41: SCR
-42: CSI0
-43: CSI1
-44: LCDCTRL0
-45: LCDCTRL1
-46: MP
-47: DEFEBE0
-48: DEFEBE1
-49: PMU
-50: SPI3
-51: TZASC
-52: PATA
-53: VE
-54: SS
-55: EMAC
-56: SATA
-57: GPS
-58: HDMI
-59: TVE
-60: ACE
-61: TVD
-62: PS2_0
-63: PS2_1
-64: USB3
-65: USB4
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt b/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt
deleted file mode 100644
index 2ec3b5ce1a0..00000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Allwinner A13 (sun5i) interrupt sources
----------------------------------------
-
-The interrupt sources available for the Allwinner A13 SoC are the
-following one:
-
-0: ENMI
-2: UART1
-4: UART3
-5: IR
-7: I2C0
-8: I2C1
-9: I2C2
-10: SPI0
-11: SPI1
-12: SPI2
-22: TIMER0
-23: TIMER1
-24: TIMER2
-25: TIMER3
-27: DMA
-28: PIO
-29: TOUCH_PANEL
-30: AUDIO_CODEC
-31: LRADC
-32: MMC0
-33: MMC1
-34: MMC2
-37: NAND
-38: USB OTG
-39: USB EHCI
-40: USB OHCI
-42: CSI
-44: LCDCTRL
-47: DEFEBE
-49: PMU
-53: VE
-54: SS
-66: PLE_PFM
-67: TIMER4
-68: TIMER5
-69: GPU_GP
-70: GPU_GPMMU
-71: GPU_PP0
-72: GPU_PPMMU0
-73: GPU_PMU
-74: GPU_RSV0
-75: GPU_RSV1
-76: GPU_RSV2
-77: GPU_RSV3
-78: GPU_RSV4
-79: GPU_RSV5
-80: GPU_RSV6
-82: SYNC_TIMER0
-83: SYNC_TIMER1