Merge master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa

* master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] echoaudio - Remove kfree_nocheck()
  [ALSA] echoaudio - Fix Makefile
  [ALSA] Add Intel D965 board support
  [ALSA] Fix/add support of Realtek ALC883 / ALC888 and ALC861 codecs
  [ALSA] Fix a typo in echoaudio/midi.c
  [ALSA] snd-aoa: enable dual-edge in GPIOs
  [ALSA] snd-aoa: support iMac G5 iSight
  [ALSA] snd-aoa: not experimental
  [ALSA] Add echoaudio sound drivers
  [ALSA] ak4xxx-adda - Code clean-up
  [ALSA] Remove CONFIG_EXPERIMENTAL from intel8x0m driver
  [ALSA] Stereo controls for M-Audio Revolution cards
  [ALSA] Fix misuse of __list_add() in seq_ports.c
  [ALSA] hda-codec - Add model entry for Samsung X60 Chane
  [ALSA] make CONFIG_SND_DYNAMIC_MINORS non-experimental
  [ALSA] Fix wrong dependencies of snd-aoa driver
  [ALSA] fix build failure due to snd-aoa
  [ALSA] AD1888 mixer controls for DC mode
  [ALSA] Suppress irq handler mismatch messages in ALSA ISA drivers
  [ALSA] usb-audio support for Turtle Beach Roadie

1 files changed, 104 insertions, 2 deletions

diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 87d76a5c73d..f61af23dd85 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -472,6 +472,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-darla20
+  ------------------
+
+    Module for Echoaudio Darla20
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-darla24
+  ------------------
+
+    Module for Echoaudio Darla24
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-dt019x
   -----------------
 
@@ -499,6 +515,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-echo3g
+  -----------------
+
+    Module for Echoaudio 3G cards (Gina3G/Layla3G)
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-emu10k1
   ------------------
 
@@ -657,6 +681,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     
     The power-management is supported.
 
+  Module snd-gina20
+  -----------------
+
+    Module for Echoaudio Gina20
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-gina24
+  -----------------
+
+    Module for Echoaudio Gina24
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-gusclassic
   ---------------------
 
@@ -760,12 +800,18 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  basic		fixed pin assignment w/o SPDIF
 	  auto		auto-config reading BIOS (default)
 
-	ALC882/883/885
+	ALC882/885
 	  3stack-dig	3-jack with SPDIF I/O
 	  6stck-dig	6-jack digital with SPDIF I/O
 	  auto		auto-config reading BIOS (default)
 
-	ALC861
+	ALC883/888
+	  3stack-dig	3-jack with SPDIF I/O
+	  6stack-dig	6-jack digital with SPDIF I/O
+	  6stack-dig-demo  6-stack digital for Intel demo board
+	  auto		auto-config reading BIOS (default)
+
+	ALC861/660
 	  3stack	3-jack
 	  3stack-dig	3-jack with SPDIF I/O
 	  6stack-dig	6-jack with SPDIF I/O
@@ -937,6 +983,30 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  driver isn't configured properly or you want to try another
 	  type for testing.
 
+  Module snd-indigo
+  -----------------
+
+    Module for Echoaudio Indigo
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-indigodj
+  -------------------
+
+    Module for Echoaudio Indigo DJ
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-indigoio
+  -------------------
+
+    Module for Echoaudio Indigo IO
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-intel8x0
   -------------------
 
@@ -1036,6 +1106,22 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     This module supports multiple cards.
 
+  Module snd-layla20
+  ------------------
+
+    Module for Echoaudio Layla20
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
+  Module snd-layla24
+  ------------------
+
+    Module for Echoaudio Layla24
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-maestro3
   -------------------
 
@@ -1056,6 +1142,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-mia
+  ---------------
+
+    Module for Echoaudio Mia
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-miro
   ---------------
 
@@ -1088,6 +1182,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     When no hotplug fw loader is available, you need to load the
     firmware via mixartloader utility in alsa-tools package.
 
+  Module snd-mona
+  ---------------
+
+    Module for Echoaudio Mona
+
+    This module supports multiple cards.
+    The driver requires the firmware loader support on kernel.
+
   Module snd-mpu401
   -----------------