x86, platforms: Remove SGI Visual Workstation

The SGI Visual Workstation seems to be dead; remove support so we
don't have to continue maintaining it.

Cc: Andrey Panin <pazke@donpac.ru>
Cc: Michael Reed <mdr@sgi.com>
Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

33 files changed, 5 insertions, 6454 deletions

diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX
index 38f8444bdd0..ad6c290235e 100644
--- a/Documentation/00-INDEX
+++ b/Documentation/00-INDEX
@@ -401,8 +401,6 @@ serial-console.txt
 	- how to set up Linux with a serial line console as the default.
 sgi-ioc4.txt
 	- description of the SGI IOC4 PCI (multi function) device.
-sgi-visws.txt
-	- short blurb on the SGI Visual Workstations.
 sh/
 	- directory with info on porting Linux to a new architecture.
 smsc_ece1099.txt
diff --git a/Documentation/sgi-visws.txt b/Documentation/sgi-visws.txt
deleted file mode 100644
index 7ff0811ca2b..00000000000
--- a/Documentation/sgi-visws.txt
+++ /dev/null
@@ -1,13 +0,0 @@
-
-The SGI Visual Workstations (models 320 and 540) are based around
-the Cobalt, Lithium, and Arsenic ASICs.  The Cobalt ASIC is the
-main system ASIC which interfaces the 1-4 IA32 cpus, the memory
-system, and the I/O system in the Lithium ASIC.  The Cobalt ASIC
-also contains the 3D gfx rendering engine which renders to main
-system memory -- part of which is used as the frame buffer which
-is DMA'ed to a video connector using the Arsenic ASIC.  A PIIX4
-chip and NS87307 are used to provide legacy device support (IDE,
-serial, floppy, and parallel).
-
-The Visual Workstation chipset largely conforms to the PC architecture
-with some notable exceptions such as interrupt handling.
diff --git a/Documentation/sound/oss/vwsnd b/Documentation/sound/oss/vwsnd
deleted file mode 100644
index 4c6cbdb3c54..00000000000
--- a/Documentation/sound/oss/vwsnd
+++ /dev/null
@@ -1,293 +0,0 @@
-vwsnd - Sound driver for the Silicon Graphics 320 and 540 Visual
-Workstations' onboard audio.
-
-Copyright 1999 Silicon Graphics, Inc.  All rights reserved.
-
-
-At the time of this writing, March 1999, there are two models of
-Visual Workstation, the 320 and the 540.  This document only describes
-those models.  Future Visual Workstation models may have different
-sound capabilities, and this driver will probably not work on those
-boxes.
-
-The Visual Workstation has an Analog Devices AD1843 "SoundComm" audio
-codec chip.  The AD1843 is accessed through the Cobalt I/O ASIC, also
-known as Lithium.  This driver programs both chips.
-
-==============================================================================
-QUICK CONFIGURATION
-
-	# insmod soundcore
-	# insmod vwsnd
-
-==============================================================================
-I/O CONNECTIONS
-
-On the Visual Workstation, only three of the AD1843 inputs are hooked
-up.  The analog line in jacks are connected to the AD1843's AUX1
-input.  The CD audio lines are connected to the AD1843's AUX2 input.
-The microphone jack is connected to the AD1843's MIC input.  The mic
-jack is mono, but the signal is delivered to both the left and right
-MIC inputs.  You can record in stereo from the mic input, but you will
-get the same signal on both channels (within the limits of A/D
-accuracy).  Full scale on the Line input is +/- 2.0 V.  Full scale on
-the MIC input is 20 dB less, or +/- 0.2 V.
-
-The AD1843's LOUT1 outputs are connected to the Line Out jacks.  The
-AD1843's HPOUT outputs are connected to the speaker/headphone jack.
-LOUT2 is not connected.  Line out's maximum level is +/- 2.0 V peak to
-peak.  The speaker/headphone out's maximum is +/- 4.0 V peak to peak.
-
-The AD1843's PCM input channel and one of its output channels (DAC1)
-are connected to Lithium.  The other output channel (DAC2) is not
-connected.
-
-==============================================================================
-CAPABILITIES
-
-The AD1843 has PCM input and output (Pulse Code Modulation, also known
-as wavetable).  PCM input and output can be mono or stereo in any of
-four formats.  The formats are 16 bit signed and 8 bit unsigned,
-u-Law, and A-Law format.  Any sample rate from 4 KHz to 49 KHz is
-available, in 1 Hz increments.
-
-The AD1843 includes an analog mixer that can mix all three input
-signals (line, mic and CD) into the analog outputs.  The mixer has a
-separate gain control and mute switch for each input.
-
-There are two outputs, line out and speaker/headphone out.  They
-always produce the same signal, and the speaker always has 3 dB more
-gain than the line out.  The speaker/headphone output can be muted,
-but this driver does not export that function.
-
-The hardware can sync audio to the video clock, but this driver does
-not have a way to specify syncing to video.
-
-==============================================================================
-PROGRAMMING
-
-This section explains the API supported by the driver.  Also see the
-Open Sound Programming Guide at http://www.opensound.com/pguide/ .
-This section assumes familiarity with that document.
-
-The driver has two interfaces, an I/O interface and a mixer interface.
-There is no MIDI or sequencer capability.
-
-==============================================================================
-PROGRAMMING PCM I/O
-
-The I/O interface is usually accessed as /dev/audio or /dev/dsp.
-Using the standard Open Sound System (OSS) ioctl calls, the sample
-rate, number of channels, and sample format may be set within the
-limitations described above.  The driver supports triggering.  It also
-supports getting the input and output pointers with one-sample
-accuracy.
-
-The SNDCTL_DSP_GETCAP ioctl returns these capabilities.
-
-	DSP_CAP_DUPLEX - driver supports full duplex.
-
-	DSP_CAP_TRIGGER - driver supports triggering.
-
-	DSP_CAP_REALTIME - values returned by SNDCTL_DSP_GETIPTR
-	and SNDCTL_DSP_GETOPTR are accurate to a few samples.
-
-Memory mapping (mmap) is not implemented.
-
-The driver permits subdivided fragment sizes from 64 to 4096 bytes.
-The number of fragments can be anything from 3 fragments to however
-many fragments fit into 124 kilobytes.  It is up to the user to
-determine how few/small fragments can be used without introducing
-glitches with a given workload.  Linux is not realtime, so we can't
-promise anything.  (sigh...)
-
-When this driver is switched into or out of mu-Law or A-Law mode on
-output, it may produce an audible click.  This is unavoidable.  To
-prevent clicking, use signed 16-bit mode instead, and convert from
-mu-Law or A-Law format in software.
-
-==============================================================================
-PROGRAMMING THE MIXER INTERFACE
-
-The mixer interface is usually accessed as /dev/mixer.  It is accessed
-through ioctls.  The mixer allows the application to control gain or
-mute several audio signal paths, and also allows selection of the
-recording source.
-
-Each of the constants described here can be read using the
-MIXER_READ(SOUND_MIXER_xxx) ioctl.  Those that are not read-only can
-also be written using the MIXER_WRITE(SOUND_MIXER_xxx) ioctl.  In most
-cases, <sys/soundcard.h> defines constants SOUND_MIXER_READ_xxx and
-SOUND_MIXER_WRITE_xxx which work just as well.
-
-SOUND_MIXER_CAPS	Read-only
-
-This is a mask of optional driver capabilities that are implemented.
-This driver's only capability is SOUND_CAP_EXCL_INPUT, which means
-that only one recording source can be active at a time.
-
-SOUND_MIXER_DEVMASK	Read-only
-
-This is a mask of the sound channels.  This driver's channels are PCM,
-LINE, MIC, CD, and RECLEV.
-
-SOUND_MIXER_STEREODEVS	Read-only
-
-This is a mask of which sound channels are capable of stereo.  All
-channels are capable of stereo.  (But see caveat on MIC input in I/O
-CONNECTIONS section above).
-
-SOUND_MIXER_OUTMASK	Read-only
-
-This is a mask of channels that route inputs through to outputs.
-Those are LINE, MIC, and CD.
-
-SOUND_MIXER_RECMASK	Read-only
-
-This is a mask of channels that can be recording sources.  Those are
-PCM, LINE, MIC, CD.
-
-SOUND_MIXER_PCM		Default: 0x5757 (0 dB)
-
-This is the gain control for PCM output.  The left and right channel
-gain are controlled independently.  This gain control has 64 levels,
-which range from -82.5 dB to +12.0 dB in 1.5 dB steps.  Those 64
-levels are mapped onto 100 levels at the ioctl, see below.
-
-SOUND_MIXER_LINE	Default: 0x4a4a (0 dB)
-
-This is the gain control for mixing the Line In source into the
-outputs.  The left and right channel gain are controlled
-independently.  This gain control has 32 levels, which range from
--34.5 dB to +12.0 dB in 1.5 dB steps.  Those 32 levels are mapped onto
-100 levels at the ioctl, see below.
-
-SOUND_MIXER_MIC		Default: 0x4a4a (0 dB)
-
-This is the gain control for mixing the MIC source into the outputs.
-The left and right channel gain are controlled independently.  This
-gain control has 32 levels, which range from -34.5 dB to +12.0 dB in
-1.5 dB steps.  Those 32 levels are mapped onto 100 levels at the
-ioctl, see below.
-
-SOUND_MIXER_CD		Default: 0x4a4a (0 dB)
-
-This is the gain control for mixing the CD audio source into the
-outputs.  The left and right channel gain are controlled
-independently.  This gain control has 32 levels, which range from
--34.5 dB to +12.0 dB in 1.5 dB steps.  Those 32 levels are mapped onto
-100 levels at the ioctl, see below.
-
-SOUND_MIXER_RECLEV	 Default: 0 (0 dB)
-
-This is the gain control for PCM input (RECording LEVel).  The left
-and right channel gain are controlled independently.  This gain
-control has 16 levels, which range from 0 dB to +22.5 dB in 1.5 dB
-steps.  Those 16 levels are mapped onto 100 levels at the ioctl, see
-below.
-
-SOUND_MIXER_RECSRC	 Default: SOUND_MASK_LINE
-
-This is a mask of currently selected PCM input sources (RECording
-SouRCes).  Because the AD1843 can only have a single recording source
-at a time, only one bit at a time can be set in this mask.  The
-allowable values are SOUND_MASK_PCM, SOUND_MASK_LINE, SOUND_MASK_MIC,
-or SOUND_MASK_CD.  Selecting SOUND_MASK_PCM sets up internal
-resampling which is useful for loopback testing and for hardware
-sample rate conversion.  But software sample rate conversion is
-probably faster, so I don't know how useful that is.
-
-SOUND_MIXER_OUTSRC	DEFAULT: SOUND_MASK_LINE|SOUND_MASK_MIC|SOUND_MASK_CD
-
-This is a mask of sources that are currently passed through to the
-outputs.  Those sources whose bits are not set are muted.
-
-==============================================================================
-GAIN CONTROL
-
-There are five gain controls listed above.  Each has 16, 32, or 64
-steps.  Each control has 1.5 dB of gain per step.  Each control is
-stereo.
-
-The OSS defines the argument to a channel gain ioctl as having two
-components, left and right, each of which ranges from 0 to 100.  The
-two components are packed into the same word, with the left side gain
-in the least significant byte, and the right side gain in the second
-least significant byte.  In C, we would say this.
-
-	#include <assert.h>
-
-	...
-
-	 	assert(leftgain >= 0 && leftgain <= 100);
-		assert(rightgain >= 0 && rightgain <= 100);
-		arg = leftgain | rightgain << 8;
-
-So each OSS gain control has 101 steps.  But the hardware has 16, 32,
-or 64 steps.  The hardware steps are spread across the 101 OSS steps
-nearly evenly.  The conversion formulas are like this, given N equals
-16, 32, or 64.
-
-	int round = N/2 - 1;
-	OSS_gain_steps = (hw_gain_steps * 100 + round) / (N - 1);
-	hw_gain_steps = (OSS_gain_steps * (N - 1) + round) / 100;
-
-Here is a snippet of C code that will return the left and right gain
-of any channel in dB.  Pass it one of the predefined gain_desc_t
-structures to access any of the five channels' gains.
-
-	typedef struct gain_desc {
-		float min_gain;
-		float gain_step;
-		int nbits;
-		int chan;
-	} gain_desc_t;
-
-	const gain_desc_t gain_pcm    = { -82.5, 1.5, 6, SOUND_MIXER_PCM    };
-	const gain_desc_t gain_line   = { -34.5, 1.5, 5, SOUND_MIXER_LINE   };
-	const gain_desc_t gain_mic    = { -34.5, 1.5, 5, SOUND_MIXER_MIC    };
-	const gain_desc_t gain_cd     = { -34.5, 1.5, 5, SOUND_MIXER_CD     };
-	const gain_desc_t gain_reclev = {   0.0, 1.5, 4, SOUND_MIXER_RECLEV };
-
-	int get_gain_dB(int fd, const gain_desc_t *gp,
-			float *left, float *right)
-	{
-		int word;
-		int lg, rg;
-		int mask = (1 << gp->nbits) - 1;
-
-		if (ioctl(fd, MIXER_READ(gp->chan), &word) != 0)
-			return -1;	/* fail */
-		lg = word & 0xFF;
-		rg = word >> 8 & 0xFF;
-		lg = (lg * mask + mask / 2) / 100;
-		rg = (rg * mask + mask / 2) / 100;
-		*left = gp->min_gain + gp->gain_step * lg;
-		*right = gp->min_gain + gp->gain_step * rg;
-		return 0;
-	}	
-
-And here is the corresponding routine to set a channel's gain in dB.
-
-	int set_gain_dB(int fd, const gain_desc_t *gp, float left, float right)
-	{
-		float max_gain =
-			gp->min_gain + (1 << gp->nbits) * gp->gain_step;
-		float round = gp->gain_step / 2;
-		int mask = (1 << gp->nbits) - 1;
-		int word;
-		int lg, rg;
-
-		if (left < gp->min_gain || right < gp->min_gain)
-			return EINVAL;
-		lg = (left - gp->min_gain + round) / gp->gain_step;
-		rg = (right - gp->min_gain + round) / gp->gain_step;
-		if (lg >= (1 << gp->nbits) || rg >= (1 << gp->nbits))
-			return EINVAL;
-		lg = (100 * lg + mask / 2) / mask;
-		rg = (100 * rg + mask / 2) / mask;
-		word = lg | rg << 8;
-
-		return ioctl(fd, MIXER_WRITE(gp->chan), &word);
-	}
-
diff --git a/MAINTAINERS b/MAINTAINERS
index b2cf5cfb4d2..7f9bc840cc4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7757,13 +7757,6 @@ F:	Documentation/ia64/serial.txt
 F:	drivers/tty/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
-SGI VISUAL WORKSTATION 320 AND 540
-M:	Andrey Panin <pazke@donpac.ru>
-L:	linux-visws-devel@lists.sf.net
-W:	http://linux-visws.sf.net
-S:	Maintained for 2.6.
-F:	Documentation/sgi-visws.txt
-
 SGI XP/XPC/XPNET DRIVER
 M:	Cliff Whickman <cpw@sgi.com>
 M:	Robin Holt <robinmholt@gmail.com>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4c33fc2336e..3c7f6dbf849 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -517,19 +517,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
 	depends on X86_64 || !SPARSEMEM
 	select ARCH_SUPPORTS_MEMORY_FAILURE
 
-config X86_VISWS
-	bool "SGI 320/540 (Visual Workstation)"
-	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
-	depends on X86_32_NON_STANDARD
-	---help---
-	  The SGI Visual Workstation series is an IA32-based workstation
-	  based on SGI systems chips with some legacy PC hardware attached.
-
-	  Say Y here to create a kernel to run on the SGI 320 or 540.
-
-	  A kernel compiled for the Visual Workstation will run on general
-	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
-
 config STA2X11
 	bool "STA2X11 Companion Chip Support"
 	depends on X86_32_NON_STANDARD && PCI
@@ -860,10 +847,6 @@ config X86_IO_APIC
 	def_bool y
 	depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI
 
-config X86_VISWS_APIC
-	def_bool y
-	depends on X86_32 && X86_VISWS
-
 config X86_REROUTE_FOR_BROKEN_BOOT_IRQS
 	bool "Reroute for broken boot IRQs"
 	depends on X86_IO_APIC
diff --git a/arch/x86/include/asm/fixmap.h b/arch/x86/include/asm/fixmap.h
index 7252cd33917..f690ee420bf 100644
--- a/arch/x86/include/asm/fixmap.h
+++ b/arch/x86/include/asm/fixmap.h
@@ -98,12 +98,6 @@ enum fixed_addresses {
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
 #endif
-#ifdef CONFIG_X86_VISWS_APIC
-	FIX_CO_CPU,	/* Cobalt timer */
-	FIX_CO_APIC,	/* Cobalt APIC Redirection Table */
-	FIX_LI_PCIA,	/* Lithium PCI Bridge A */
-	FIX_LI_PCIB,	/* Lithium PCI Bridge B */
-#endif
 	FIX_RO_IDT,	/* Virtual mapping for read-only IDT */
 #ifdef CONFIG_X86_32
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
diff --git a/arch/x86/include/asm/hw_irq.h b/arch/x86/include/asm/hw_irq.h
index 67d69b8e2d2..a307b7530e5 100644
--- a/arch/x86/include/asm/hw_irq.h
+++ b/arch/x86/include/asm/hw_irq.h
@@ -98,7 +98,6 @@ extern void trace_call_function_single_interrupt(void);
 #define IO_APIC_IRQ(x) (((x) >= NR_IRQS_LEGACY) || ((1<<(x)) & io_apic_irqs))
 extern unsigned long io_apic_irqs;
 
-extern void init_VISWS_APIC_irqs(void);
 extern void setup_IO_APIC(void);
 extern void disable_IO_APIC(void);
 
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index d62c9f809bc..9264f04a4c5 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -39,12 +39,6 @@ static inline void vsmp_init(void) { }
 
 void setup_bios_corruption_check(void);
 
-#ifdef CONFIG_X86_VISWS
-extern void visws_early_detect(void);
-#else
-static inline void visws_early_detect(void) { }
-#endif
-
 extern unsigned long saved_video_mode;
 
 extern void reserve_standard_io_resources(void);
diff --git a/arch/x86/include/asm/visws/cobalt.h b/arch/x86/include/asm/visws/cobalt.h
deleted file mode 100644
index 2edb37637ea..00000000000
--- a/arch/x86/include/asm/visws/cobalt.h
+++ /dev/null
@@ -1,127 +0,0 @@
-#ifndef _ASM_X86_VISWS_COBALT_H
-#define _ASM_X86_VISWS_COBALT_H
-
-#include <asm/fixmap.h>
-
-/*
- * Cobalt SGI Visual Workstation system ASIC
- */ 
-
-#define CO_CPU_NUM_PHYS 0x1e00
-#define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
-
-#define CO_CPU_MAX 4
-
-#define	CO_CPU_PHYS		0xc2000000
-#define	CO_APIC_PHYS		0xc4000000
-
-/* see set_fixmap() and asm/fixmap.h */
-#define	CO_CPU_VADDR		(fix_to_virt(FIX_CO_CPU))
-#define	CO_APIC_VADDR		(fix_to_virt(FIX_CO_APIC))
-
-/* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
-#define	CO_CPU_REV		0x08
-#define	CO_CPU_CTRL		0x10
-#define	CO_CPU_STAT		0x20
-#define	CO_CPU_TIMEVAL		0x30
-
-/* CO_CPU_CTRL bits */
-#define	CO_CTRL_TIMERUN		0x04		/* 0 == disabled */
-#define	CO_CTRL_TIMEMASK	0x08		/* 0 == unmasked */
-
-/* CO_CPU_STATUS bits */
-#define	CO_STAT_TIMEINTR	0x02	/* (r) 1 == int pend, (w) 0 == clear */
-
-/* CO_CPU_TIMEVAL value */
-#define	CO_TIME_HZ		100000000	/* Cobalt core rate */
-
-/* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
-#define	CO_APIC_HI(n)		(((n) * 0x10) + 4)
-#define	CO_APIC_LO(n)		((n) * 0x10)
-#define	CO_APIC_ID		0x0ffc
-
-/* CO_APIC_ID bits */
-#define	CO_APIC_ENABLE		0x00000100
-
-/* CO_APIC_LO bits */
-#define	CO_APIC_MASK		0x00010000	/* 0 = enabled */
-#define	CO_APIC_LEVEL		0x00008000	/* 0 = edge */
-
-/*
- * Where things are physically wired to Cobalt
- * #defines with no board _<type>_<rev>_ are common to all (thus far)
- */
-#define	CO_APIC_IDE0		4
-#define CO_APIC_IDE1		2		/* Only on 320 */
-
-#define	CO_APIC_8259		12		/* serial, floppy, par-l-l */
-
-/* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
-#define	CO_APIC_PCIA_BASE0	0 /* and 1 */	/* slot 0, line 0 */
-#define	CO_APIC_PCIA_BASE123	5 /* and 6 */	/* slot 0, line 1 */
-
-#define	CO_APIC_PIIX4_USB	7		/* this one is weird */
-
-/* Lithium PCI Bridge B -- "the one with PIIX4" */
-#define	CO_APIC_PCIB_BASE0	8 /* and 9-12 *//* slot 0, line 0 */
-#define	CO_APIC_PCIB_BASE123	13 /* 14.15 */	/* slot 0, line 1 */
-
-#define	CO_APIC_VIDOUT0		16
-#define	CO_APIC_VIDOUT1		17
-#define	CO_APIC_VIDIN0		18
-#define	CO_APIC_VIDIN1		19
-
-#define	CO_APIC_LI_AUDIO	22
-
-#define	CO_APIC_AS		24
-#define	CO_APIC_RE		25
-
-#define CO_APIC_CPU		28		/* Timer and Cache interrupt */
-#define	CO_APIC_NMI		29
-#define	CO_APIC_LAST		CO_APIC_NMI
-
-/*
- * This is how irqs are assigned on the Visual Workstation.
- * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
- * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
- */
-#define	CO_IRQ_APIC0	16			/* irq of apic entry 0 */
-#define	IS_CO_APIC(irq)	((irq) >= CO_IRQ_APIC0)
-#define	CO_IRQ(apic)	(CO_IRQ_APIC0 + (apic))	/* apic ent to irq */
-#define	CO_APIC(irq)	((irq) - CO_IRQ_APIC0)	/* irq to apic ent */
-#define CO_IRQ_IDE0	14			/* knowledge of... */
-#define CO_IRQ_IDE1	15			/* ... ide driver defaults! */
-#define	CO_IRQ_8259	CO_IRQ(CO_APIC_8259)
-
-#ifdef CONFIG_X86_VISWS_APIC
-static inline void co_cpu_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
-}
-
-static inline unsigned long co_cpu_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
-}            
-             
-static inline void co_apic_write(unsigned long reg, unsigned long v)
-{
-	*((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
-}            
-             
-static inline unsigned long co_apic_read(unsigned long reg)
-{
-	return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
-}
-#endif
-
-extern char visws_board_type;
-
-#define	VISWS_320	0
-#define	VISWS_540	1
-
-extern char visws_board_rev;
-
-extern int pci_visws_init(void);
-
-#endif /* _ASM_X86_VISWS_COBALT_H */
diff --git a/arch/x86/include/asm/visws/lithium.h b/arch/x86/include/asm/visws/lithium.h
deleted file mode 100644
index a10d89bc127..00000000000
--- a/arch/x86/include/asm/visws/lithium.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef _ASM_X86_VISWS_LITHIUM_H
-#define _ASM_X86_VISWS_LITHIUM_H
-
-#include <asm/fixmap.h>
-
-/*
- * Lithium is the SGI Visual Workstation I/O ASIC
- */
-
-#define	LI_PCI_A_PHYS		0xfc000000	/* Enet is dev 3 */
-#define	LI_PCI_B_PHYS		0xfd000000	/* PIIX4 is here */
-
-/* see set_fixmap() and asm/fixmap.h */
-#define LI_PCIA_VADDR   (fix_to_virt(FIX_LI_PCIA))
-#define LI_PCIB_VADDR   (fix_to_virt(FIX_LI_PCIB))
-
-/* Not a standard PCI? (not in linux/pci.h) */
-#define	LI_PCI_BUSNUM	0x44			/* lo8: primary, hi8: sub */
-#define LI_PCI_INTEN    0x46
-
-/* LI_PCI_INTENT bits */
-#define	LI_INTA_0	0x0001
-#define	LI_INTA_1	0x0002
-#define	LI_INTA_2	0x0004
-#define	LI_INTA_3	0x0008
-#define	LI_INTA_4	0x0010
-#define	LI_INTB		0x0020
-#define	LI_INTC		0x0040
-#define	LI_INTD		0x0080
-
-/* More special purpose macros... */
-static inline void li_pcia_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIA_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcia_read16(unsigned long reg)
-{
-	 return *((volatile unsigned short *)(LI_PCIA_VADDR+reg));
-}
-
-static inline void li_pcib_write16(unsigned long reg, unsigned short v)
-{
-	*((volatile unsigned short *)(LI_PCIB_VADDR+reg))=v;
-}
-
-static inline unsigned short li_pcib_read16(unsigned long reg)
-{
-	return *((volatile unsigned short *)(LI_PCIB_VADDR+reg));
-}
-
-#endif /* _ASM_X86_VISWS_LITHIUM_H */
-
diff --git a/arch/x86/include/asm/visws/piix4.h b/arch/x86/include/asm/visws/piix4.h
deleted file mode 100644
index d0af4d338e7..00000000000
--- a/arch/x86/include/asm/visws/piix4.h
+++ /dev/null
@@ -1,107 +0,0 @@
-#ifndef _ASM_X86_VISWS_PIIX4_H
-#define _ASM_X86_VISWS_PIIX4_H
-
-/*
- * PIIX4 as used on SGI Visual Workstations
- */
-
-#define	PIIX_PM_START		0x0F80
-
-#define	SIO_GPIO_START		0x0FC0
-
-#define	SIO_PM_START		0x0FC8
-
-#define	PMBASE			PIIX_PM_START
-#define	GPIREG0			(PMBASE+0x30)
-#define	GPIREG(x)		(GPIREG0+((x)/8))
-#define	GPIBIT(x)		(1 << ((x)%8))
-
-#define	PIIX_GPI_BD_ID1		18
-#define	PIIX_GPI_BD_ID2		19
-#define	PIIX_GPI_BD_ID3		20
-#define	PIIX_GPI_BD_ID4		21
-#define	PIIX_GPI_BD_REG		GPIREG(PIIX_GPI_BD_ID1)
-#define	PIIX_GPI_BD_MASK	(GPIBIT(PIIX_GPI_BD_ID1) | \
-				GPIBIT(PIIX_GPI_BD_ID2) | \
-				GPIBIT(PIIX_GPI_BD_ID3) | \
-				GPIBIT(PIIX_GPI_BD_ID4) )
-
-#define	PIIX_GPI_BD_SHIFT	(PIIX_GPI_BD_ID1 % 8)
-
-#define	SIO_INDEX		0x2e
-#define	SIO_DATA		0x2f
-
-#define	SIO_DEV_SEL		0x7
-#define	SIO_DEV_ENB		0x30
-#define	SIO_DEV_MSB		0x60
-#define	SIO_DEV_LSB		0x61
-
-#define	SIO_GP_DEV		0x7
-
-#define	SIO_GP_BASE		SIO_GPIO_START
-#define	SIO_GP_MSB		(SIO_GP_BASE>>8)
-#define	SIO_GP_LSB		(SIO_GP_BASE&0xff)
-
-#define	SIO_GP_DATA1		(SIO_GP_BASE+0)
-
-#define	SIO_PM_DEV		0x8
-
-#define	SIO_PM_BASE		SIO_PM_START
-#define	SIO_PM_MSB		(SIO_PM_BASE>>8)
-#define	SIO_PM_LSB		(SIO_PM_BASE&0xff)
-#define	SIO_PM_INDEX		(SIO_PM_BASE+0)
-#define	SIO_PM_DATA		(SIO_PM_BASE+1)
-
-#define	SIO_PM_FER2		0x1
-
-#define	SIO_PM_GP_EN		0x80
-
-
-
-/*
- * This is the dev/reg where generating a config cycle will
- * result in a PCI special cycle.
- */
-#define SPECIAL_DEV		0xff
-#define SPECIAL_REG		0x00
-
-/*
- * PIIX4 needs to see a special cycle with the following data
- * to be convinced the processor has gone into the stop grant
- * state.  PIIX4 insists on seeing this before it will power
- * down a system.
- */
-#define PIIX_SPECIAL_STOP		0x00120002
-
-#define PIIX4_RESET_PORT	0xcf9
-#define PIIX4_RESET_VAL		0x6
-
-#define PMSTS_PORT		0xf80	// 2 bytes	PM Status
-#define PMEN_PORT		0xf82	// 2 bytes	PM Enable
-#define	PMCNTRL_PORT		0xf84	// 2 bytes	PM Control
-
-#define PM_SUSPEND_ENABLE	0x2000	// start sequence to suspend state
-
-/*
- * PMSTS and PMEN I/O bit definitions.
- * (Bits are the same in both registers)
- */
-#define PM_STS_RSM		(1<<15)	// Resume Status
-#define PM_STS_PWRBTNOR		(1<<11)	// Power Button Override
-#define PM_STS_RTC		(1<<10)	// RTC status
-#define PM_STS_PWRBTN		(1<<8)	// Power Button Pressed?
-#define PM_STS_GBL		(1<<5)	// Global Status
-#define PM_STS_BM		(1<<4)	// Bus Master Status
-#define PM_STS_TMROF		(1<<0)	// Timer Overflow Status.
-
-/*
- * Stop clock GPI register
- */
-#define PIIX_GPIREG0			(0xf80 + 0x30)
-
-/*
- * Stop clock GPI bit in GPIREG0
- */
-#define	PIIX_GPI_STPCLK		0x4	// STPCLK signal routed back in
-
-#endif /* _ASM_X86_VISWS_PIIX4_H */
diff --git a/arch/x86/include/asm/visws/sgivw.h b/arch/x86/include/asm/visws/sgivw.h
deleted file mode 100644
index 5fbf63e1003..00000000000
--- a/arch/x86/include/asm/visws/sgivw.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * Frame buffer position and size:
- */
-extern unsigned long sgivwfb_mem_phys;
-extern unsigned long sgivwfb_mem_size;
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index f824d697db1..9edae8a8ed2 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -2132,7 +2132,6 @@ int generic_processor_info(int apicid, int version)
 	 *
 	 * - arch/x86/kernel/mpparse.c: MP_processor_info()
 	 * - arch/x86/mm/amdtopology.c: amd_numa_init()
-	 * - arch/x86/platform/visws/visws_quirks.c: MP_processor_info()
 	 *
 	 * This function is executed with the modified
 	 * boot_cpu_physical_apicid. So, disabled_cpu_apicid kernel
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 06853e67035..12907ab8f33 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -869,7 +869,6 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
-	visws_early_detect();
 
 	/*
 	 * copy kernel address range established so far and switch
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index e063eed0f91..758b8272c82 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -13,8 +13,6 @@ obj-y				+= legacy.o irq.o
 
 obj-$(CONFIG_STA2X11)           += sta2x11-fixup.o
 
-obj-$(CONFIG_X86_VISWS)		+= visws.o
-
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 obj-$(CONFIG_X86_NUMACHIP)	+= numachip.o
 
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 981c2dbd72c..ed11916310c 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -561,7 +561,6 @@ char * __init pcibios_setup(char *str)
 		pci_probe |= PCI_PROBE_NOEARLY;
 		return NULL;
 	}
-#ifndef CONFIG_X86_VISWS
 	else if (!strcmp(str, "usepirqmask")) {
 		pci_probe |= PCI_USE_PIRQ_MASK;
 		return NULL;
@@ -571,9 +570,7 @@ char * __init pcibios_setup(char *str)
 	} else if (!strncmp(str, "lastbus=", 8)) {
 		pcib