Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

43 files changed, 893 insertions, 244 deletions

diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 5ad74c85a03..3df0146b797 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -1122,12 +1122,12 @@ exit:
 static void at76_dump_mib_local(struct at76_priv *priv)
 {
 	int ret;
-	struct mib_local *m = kmalloc(sizeof(struct mib_phy), GFP_KERNEL);
+	struct mib_local *m = kmalloc(sizeof(*m), GFP_KERNEL);
 
 	if (!m)
 		return;
 
-	ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(struct mib_local));
+	ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m));
 	if (ret < 0) {
 		wiphy_err(priv->hw->wiphy,
 			  "at76_get_mib (LOCAL) failed: %d\n", ret);
diff --git a/drivers/net/wireless/brcm80211/Kconfig b/drivers/net/wireless/brcm80211/Kconfig
index c5104533e24..b480088b3db 100644
--- a/drivers/net/wireless/brcm80211/Kconfig
+++ b/drivers/net/wireless/brcm80211/Kconfig
@@ -36,6 +36,15 @@ config BRCMFMAC_SDIO
 	  IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
 	  use the driver for a SDIO wireless card.
 
+config BRCMFMAC_SDIO_OOB
+	bool "Out of band interrupt support for SDIO interface chipset"
+	depends on BRCMFMAC_SDIO
+	---help---
+	  This option enables out-of-band interrupt support for Broadcom
+	  SDIO Wifi chipset using fullmac in order to gain better
+	  performance and deep sleep wake up capability on certain
+	  platforms. Say N if you are unsure.
+
 config BRCMFMAC_USB
 	bool "USB bus interface support for FullMAC driver"
 	depends on USB
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
index e925290b432..4add7da2468 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
@@ -39,37 +39,113 @@
 
 #define SDIOH_API_ACCESS_RETRY_LIMIT	2
 
-static void brcmf_sdioh_irqhandler(struct sdio_func *func)
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static irqreturn_t brcmf_sdio_irqhandler(int irq, void *dev_id)
 {
-	struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(&func->card->dev);
+	struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(dev_id);
 
-	brcmf_dbg(TRACE, "***IRQHandler\n");
+	brcmf_dbg(INTR, "oob intr triggered\n");
 
-	sdio_release_host(func);
+	/*
+	 * out-of-band interrupt is level-triggered which won't
+	 * be cleared until dpc
+	 */
+	if (sdiodev->irq_en) {
+		disable_irq_nosync(irq);
+		sdiodev->irq_en = false;
+	}
 
 	brcmf_sdbrcm_isr(sdiodev->bus);
 
-	sdio_claim_host(func);
+	return IRQ_HANDLED;
+}
+
+int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
+{
+	int ret = 0;
+	u8 data;
+	unsigned long flags;
+
+	brcmf_dbg(TRACE, "Entering\n");
+
+	brcmf_dbg(ERROR, "requesting irq %d\n", sdiodev->irq);
+	ret = request_irq(sdiodev->irq, brcmf_sdio_irqhandler,
+			  sdiodev->irq_flags, "brcmf_oob_intr",
+			  &sdiodev->func[1]->card->dev);
+	if (ret != 0)
+		return ret;
+	spin_lock_init(&sdiodev->irq_en_lock);
+	spin_lock_irqsave(&sdiodev->irq_en_lock, flags);
+	sdiodev->irq_en = true;
+	spin_unlock_irqrestore(&sdiodev->irq_en_lock, flags);
+
+	ret = enable_irq_wake(sdiodev->irq);
+	if (ret != 0)
+		return ret;
+	sdiodev->irq_wake = true;
+
+	/* must configure SDIO_CCCR_IENx to enable irq */
+	data = brcmf_sdcard_cfg_read(sdiodev, SDIO_FUNC_0,
+				     SDIO_CCCR_IENx, &ret);
+	data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx,
+			       data, &ret);
+
+	/* redirect, configure ane enable io for interrupt signal */
+	data = SDIO_SEPINT_MASK | SDIO_SEPINT_OE;
+	if (sdiodev->irq_flags | IRQF_TRIGGER_HIGH)
+		data |= SDIO_SEPINT_ACT_HI;
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT,
+			       data, &ret);
+
+	return 0;
+}
+
+int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
+{
+	brcmf_dbg(TRACE, "Entering\n");
+
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_BRCM_SEPINT,
+			       0, NULL);
+	brcmf_sdcard_cfg_write(sdiodev, SDIO_FUNC_0, SDIO_CCCR_IENx, 0, NULL);
+
+	if (sdiodev->irq_wake) {
+		disable_irq_wake(sdiodev->irq);
+		sdiodev->irq_wake = false;
+	}
+	free_irq(sdiodev->irq, &sdiodev->func[1]->card->dev);
+	sdiodev->irq_en = false;
+
+	return 0;
+}
+#else		/* CONFIG_BRCMFMAC_SDIO_OOB */
+static void brcmf_sdio_irqhandler(struct sdio_func *func)
+{
+	struct brcmf_sdio_dev *sdiodev = dev_get_drvdata(&func->card->dev);
+
+	brcmf_dbg(INTR, "ib intr triggered\n");
+
+	brcmf_sdbrcm_isr(sdiodev->bus);
 }
 
 /* dummy handler for SDIO function 2 interrupt */
-static void brcmf_sdioh_dummy_irq_handler(struct sdio_func *func)
+static void brcmf_sdio_dummy_irqhandler(struct sdio_func *func)
 {
 }
 
-int brcmf_sdcard_intr_reg(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev)
 {
 	brcmf_dbg(TRACE, "Entering\n");
 
 	sdio_claim_host(sdiodev->func[1]);
-	sdio_claim_irq(sdiodev->func[1], brcmf_sdioh_irqhandler);
-	sdio_claim_irq(sdiodev->func[2], brcmf_sdioh_dummy_irq_handler);
+	sdio_claim_irq(sdiodev->func[1], brcmf_sdio_irqhandler);
+	sdio_claim_irq(sdiodev->func[2], brcmf_sdio_dummy_irqhandler);
 	sdio_release_host(sdiodev->func[1]);
 
 	return 0;
 }
 
-int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev)
+int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev)
 {
 	brcmf_dbg(TRACE, "Entering\n");
 
@@ -80,6 +156,7 @@ int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev)
 
 	return 0;
 }
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
 
 u8 brcmf_sdcard_cfg_read(struct brcmf_sdio_dev *sdiodev, uint fnc_num, u32 addr,
 			 int *err)
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 758c115b556..dd07d33a927 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -27,6 +27,7 @@
 #include <linux/errno.h>
 #include <linux/sched.h>	/* request_irq() */
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <net/cfg80211.h>
 
 #include <defs.h>
@@ -55,6 +56,15 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = {
 };
 MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids);
 
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static struct list_head oobirq_lh;
+struct brcmf_sdio_oobirq {
+	unsigned int irq;
+	unsigned long flags;
+	struct list_head list;
+};
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
+
 static bool
 brcmf_pm_resume_error(struct brcmf_sdio_dev *sdiodev)
 {
@@ -107,7 +117,8 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
 			}
 			sdio_release_host(sdfunc);
 		}
-	} else if (regaddr == SDIO_CCCR_ABORT) {
+	} else if ((regaddr == SDIO_CCCR_ABORT) ||
+		   (regaddr == SDIO_CCCR_IENx)) {
 		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
 				 GFP_KERNEL);
 		if (!sdfunc)
@@ -467,12 +478,40 @@ void brcmf_sdioh_detach(struct brcmf_sdio_dev *sdiodev)
 
 }
 
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static int brcmf_sdio_getintrcfg(struct brcmf_sdio_dev *sdiodev)
+{
+	struct brcmf_sdio_oobirq *oobirq_entry;
+
+	if (list_empty(&oobirq_lh)) {
+		brcmf_dbg(ERROR, "no valid oob irq resource\n");
+		return -ENXIO;
+	}
+
+	oobirq_entry = list_first_entry(&oobirq_lh, struct brcmf_sdio_oobirq,
+					list);
+
+	sdiodev->irq = oobirq_entry->irq;
+	sdiodev->irq_flags = oobirq_entry->flags;
+	list_del(&oobirq_entry->list);
+	kfree(oobirq_entry);
+
+	return 0;
+}
+#else
+static inline int brcmf_sdio_getintrcfg(struct brcmf_sdio_dev *sdiodev)
+{
+	return 0;
+}
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
+
 static int brcmf_ops_sdio_probe(struct sdio_func *func,
 			      const struct sdio_device_id *id)
 {
 	int ret = 0;
 	struct brcmf_sdio_dev *sdiodev;
 	struct brcmf_bus *bus_if;
+
 	brcmf_dbg(TRACE, "Enter\n");
 	brcmf_dbg(TRACE, "func->class=%x\n", func->class);
 	brcmf_dbg(TRACE, "sdio_vendor: 0x%04x\n", func->vendor);
@@ -511,6 +550,10 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
 		sdiodev = dev_get_drvdata(&func->card->dev);
 		if ((!sdiodev) || (sdiodev->func[1]->card != func->card))
 			return -ENODEV;
+
+		ret = brcmf_sdio_getintrcfg(sdiodev);
+		if (ret)
+			return ret;
 		sdiodev->func[2] = func;
 
 		bus_if = sdiodev->bus_if;
@@ -603,6 +646,65 @@ static struct sdio_driver brcmf_sdmmc_driver = {
 #endif	/* CONFIG_PM_SLEEP */
 };
 
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static int brcmf_sdio_pd_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct brcmf_sdio_oobirq *oobirq_entry;
+	int i, ret;
+
+	INIT_LIST_HEAD(&oobirq_lh);
+
+	for (i = 0; ; i++) {
+		res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+		if (!res)
+			break;
+
+		oobirq_entry = kzalloc(sizeof(struct brcmf_sdio_oobirq),
+				       GFP_KERNEL);
+		oobirq_entry->irq = res->start;
+		oobirq_entry->flags = res->flags & IRQF_TRIGGER_MASK;
+		list_add_tail(&oobirq_entry->list, &oobirq_lh);
+	}
+	if (i == 0)
+		return -ENXIO;
+
+	ret = sdio_register_driver(&brcmf_sdmmc_driver);
+
+	if (ret)
+		brcmf_dbg(ERROR, "sdio_register_driver failed: %d\n", ret);
+
+	return ret;
+}
+
+static struct platform_driver brcmf_sdio_pd = {
+	.probe		= brcmf_sdio_pd_probe,
+	.driver		= {
+		.name	= "brcmf_sdio_pd"
+	}
+};
+
+void brcmf_sdio_exit(void)
+{
+	brcmf_dbg(TRACE, "Enter\n");
+
+	sdio_unregister_driver(&brcmf_sdmmc_driver);
+
+	platform_driver_unregister(&brcmf_sdio_pd);
+}
+
+void brcmf_sdio_init(void)
+{
+	int ret;
+
+	brcmf_dbg(TRACE, "Enter\n");
+
+	ret = platform_driver_register(&brcmf_sdio_pd);
+
+	if (ret)
+		brcmf_dbg(ERROR, "platform_driver_register failed: %d\n", ret);
+}
+#else
 void brcmf_sdio_exit(void)
 {
 	brcmf_dbg(TRACE, "Enter\n");
@@ -621,3 +723,4 @@ void brcmf_sdio_init(void)
 	if (ret)
 		brcmf_dbg(ERROR, "sdio_register_driver failed: %d\n", ret);
 }
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index a80b840051a..149ee67beb2 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -2352,6 +2352,24 @@ static void brcmf_sdbrcm_bus_stop(struct device *dev)
 	up(&bus->sdsem);
 }
 
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->sdiodev->irq_en_lock, flags);
+	if (!bus->sdiodev->irq_en && !bus->ipend) {
+		enable_irq(bus->sdiodev->irq);
+		bus->sdiodev->irq_en = true;
+	}
+	spin_unlock_irqrestore(&bus->sdiodev->irq_en_lock, flags);
+}
+#else
+static inline void brcmf_sdbrcm_clrintr(struct brcmf_sdio *bus)
+{
+}
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
+
 static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 {
 	u32 intstatus, newstatus = 0;
@@ -2509,6 +2527,8 @@ static bool brcmf_sdbrcm_dpc(struct brcmf_sdio *bus)
 	bus->intstatus = intstatus;
 
 clkwait:
+	brcmf_sdbrcm_clrintr(bus);
+
 	if (data_ok(bus) && bus->ctrl_frame_stat &&
 		(bus->clkstate == CLK_AVAIL)) {
 		int ret, i;
@@ -3508,8 +3528,14 @@ static int brcmf_sdbrcm_bus_init(struct device *dev)
 	brcmf_sdcard_cfg_write(bus->sdiodev, SDIO_FUNC_1,
 			       SBSDIO_FUNC1_CHIPCLKCSR, saveclk, &err);
 
+	if (ret == 0) {
+		ret = brcmf_sdio_intr_register(bus->sdiodev);
+		if (ret != 0)
+			brcmf_dbg(ERROR, "intr register failed:%d\n", ret);
+	}
+
 	/* If we didn't come up, turn off backplane clock */
-	if (!ret)
+	if (bus_if->state != BRCMF_BUS_DATA)
 		brcmf_sdbrcm_clkctl(bus, CLK_NONE, false);
 
 exit:
@@ -3867,7 +3893,7 @@ static void brcmf_sdbrcm_release(struct brcmf_sdio *bus)
 
 	if (bus) {
 		/* De-register interrupt handler */
-		brcmf_sdcard_intr_dereg(bus->sdiodev);
+		brcmf_sdio_intr_unregister(bus->sdiodev);
 
 		if (bus->sdiodev->bus_if->drvr) {
 			brcmf_detach(bus->sdiodev->dev);
@@ -3968,15 +3994,6 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev)
 		goto fail;
 	}
 
-	/* Register interrupt callback, but mask it (not operational yet). */
-	brcmf_dbg(INTR, "disable SDIO interrupts (not interested yet)\n");
-	ret = brcmf_sdcard_intr_reg(bus->sdiodev);
-	if (ret != 0) {
-		brcmf_dbg(ERROR, "FAILED: sdcard_intr_reg returned %d\n", ret);
-		goto fail;
-	}
-	brcmf_dbg(INTR, "registered SDIO interrupt function ok\n");
-
 	brcmf_dbg(INFO, "completed!!\n");
 
 	/* if firmware path present try to download and bring up bus */
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
index 0281d207d99..7010eaf71f9 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
+++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h
@@ -43,6 +43,13 @@
 /* as of sdiod rev 0, supports 3 functions */
 #define SBSDIO_NUM_FUNCTION		3
 
+/* function 0 vendor specific CCCR registers */
+#define SDIO_CCCR_BRCM_SEPINT		0xf2
+
+#define  SDIO_SEPINT_MASK		0x01
+#define  SDIO_SEPINT_OE			0x02
+#define  SDIO_SEPINT_ACT_HI		0x04
+
 /* function 1 miscellaneous registers */
 
 /* sprom command and status */
@@ -144,13 +151,18 @@ struct brcmf_sdio_dev {
 	wait_queue_head_t request_buffer_wait;
 	struct device *dev;
 	struct brcmf_bus *bus_if;
+#ifdef CONFIG_BRCMFMAC_SDIO_OOB
+	unsigned int irq;		/* oob interrupt number */
+	unsigned long irq_flags;	/* board specific oob flags */
+	bool irq_en;			/* irq enable flags */
+	spinlock_t irq_en_lock;
+	bool irq_wake;			/* irq wake enable flags */
+#endif		/* CONFIG_BRCMFMAC_SDIO_OOB */
 };
 
-/* Register/deregister device interrupt handler. */
-extern int
-brcmf_sdcard_intr_reg(struct brcmf_sdio_dev *sdiodev);
-
-extern int brcmf_sdcard_intr_dereg(struct brcmf_sdio_dev *sdiodev);
+/* Register/deregister interrupt handler. */
+extern int brcmf_sdio_intr_register(struct brcmf_sdio_dev *sdiodev);
+extern int brcmf_sdio_intr_unregister(struct brcmf_sdio_dev *sdiodev);
 
 /* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
  *   fn:   function number
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index c72136c0777..9cfae0c0870 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1963,10 +1963,8 @@ static int ipw2100_wdev_init(struct net_device *dev)
 	wdev->wiphy->n_cipher_suites = ARRAY_SIZE(ipw_cipher_suites);
 
 	set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
-	if (wiphy_register(wdev->wiphy)) {
-		ipw2100_down(priv);
+	if (wiphy_register(wdev->wiphy))
 		return -EIO;
-	}
 	return 0;
 }
 
@@ -6331,6 +6329,11 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 	printk(KERN_INFO DRV_NAME
 	       ": Detected Intel PRO/Wireless 2100 Network Connection\n");
 
+	err = ipw2100_wdev_init(dev);
+	if (err)
+		goto fail;
+	registered = 1;
+
 	/* Bring up the interface.  Pre 0.46, after we registered the
 	 * network device we would call ipw2100_up.  This introduced a race
 	 * condition with newer hotplug configurations (network was coming
@@ -6347,11 +6350,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
 		       "Error calling register_netdev.\n");
 		goto fail;
 	}
-	registered = 1;
-
-	err = ipw2100_wdev_init(dev);
-	if (err)
-		goto fail;
+	registered = 2;
 
 	mutex_lock(&priv->action_mutex);
 
@@ -6390,13 +6389,16 @@ out:
 
       fail_unlock:
 	mutex_unlock(&priv->action_mutex);
-	wiphy_unregister(priv->ieee->wdev.wiphy);
-	kfree(priv->ieee->bg_band.channels);
       fail:
 	if (dev) {
-		if (registered)
+		if (registered >= 2)
 			unregister_netdev(dev);
 
+		if (registered) {
+			wiphy_unregister(priv->ieee->wdev.wiphy);
+			kfree(priv->ieee->bg_band.channels);
+		}
+
 		ipw2100_hw_stop_adapter(priv);
 
 		ipw2100_disable_interrupts(priv);
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index b3707dadad1..0036737fe8e 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11443,20 +11443,6 @@ static void ipw_bg_down(struct work_struct *work)
 	mutex_unlock(&priv->mutex);
 }
 
-/* Called by register_netdev() */
-static int ipw_net_init(struct net_device *dev)
-{
-	int rc = 0;
-	struct ipw_priv *priv = libipw_priv(dev);
-
-	mutex_lock(&priv->mutex);
-	if (ipw_up(priv))
-		rc = -EIO;
-	mutex_unlock(&priv->mutex);
-
-	return rc;
-}
-
 static int ipw_wdev_init(struct net_device *dev)
 {
 	int i, rc = 0;
@@ -11725,7 +11711,6 @@ static void ipw_prom_free(struct ipw_priv *priv)
 #endif
 
 static const struct net_device_ops ipw_netdev_ops = {
-	.ndo_init		= ipw_net_init,
 	.ndo_open		= ipw_net_open,
 	.ndo_stop		= ipw_net_stop,
 	.ndo_set_rx_mode	= ipw_net_set_multicast_list,
@@ -11848,17 +11833,24 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 		goto out_release_irq;
 	}
 
-	mutex_unlock(&priv->mutex);
-	err = register_netdev(net_dev);
-	if (err) {
-		IPW_ERROR("failed to register network device\n");
+	if (ipw_up(priv)) {
+		mutex_unlock(&priv->mutex);
+		err = -EIO;
 		goto out_remove_sysfs;
 	}
 
+	mutex_unlock(&priv->mutex);
+
 	err = ipw_wdev_init(net_dev);
 	if (err) {
 		IPW_ERROR("failed to register wireless device\n");
-		goto out_unregister_netdev;
+		goto out_remove_sysfs;
+	}
+
+	err = register_netdev(net_dev);
+	if (err) {
+		IPW_ERROR("failed to register network device\n");
+		goto out_unregister_wiphy;
 	}
 
 #ifdef CONFIG_IPW2200_PROMISCUOUS
@@ -11867,10 +11859,8 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 		if (err) {
 			IPW_ERROR("Failed to register promiscuous network "
 				  "device (error %d).\n", err);
-			wiphy_unregister(priv->ieee->wdev.wiphy);
-			kfree(priv->ieee->a_band.channels);
-			kfree(priv->ieee->bg_band.channels);
-			goto out_unregister_netdev;
+			unregister_netdev(priv->net_dev);
+			goto out_unregister_wiphy;
 		}
 	}
 #endif
@@ -11882,8 +11872,10 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev,
 
 	return 0;
 
-      out_unregister_netdev:
-	unregister_netdev(priv->net_dev);
+      out_unregister_wiphy:
+	wiphy_unregister(priv->ieee->wdev.wiphy);
+	kfree(priv->ieee->a_band.channels);
+	kfree(priv->ieee->bg_band.channels);
       out_remove_sysfs:
 	sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group);
       out_release_irq:
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
index e1c2bb80205..01dc4426731 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-lib.c
@@ -186,76 +186,8 @@ done:
 /*
  * BT coex
  */
-/*
- * Macros to access the lookup table.
- *
- * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req,
-* wifi_prio, wifi_txrx and wifi_sh_ant_req.
- *
- * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH
- *
- * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits
- * one after another in 32-bit registers, and "registers" 0 through 7 contain
- * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order).
- *
- * These macros encode that format.
- */
-#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \
-		  wifi_txrx, wifi_sh_ant_req) \
-	(bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \
-	(wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6))
-
-#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \
-	lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f)))
-#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-				 wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	(!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, \
-				   bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
-				   wifi_sh_ant_req))))
-#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-				wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \
-			       bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
-			       wifi_sh_ant_req))
-#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \
-				  wifi_req, wifi_prio, wifi_txrx, \
-				  wifi_sh_ant_req) \
-	LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \
-			       bt_rf_act, wifi_req, wifi_prio, wifi_txrx, \
-			       wifi_sh_ant_req))
-
-#define LUT_WLAN_KILL_OP(lut, op, val) \
-	lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e)))
-#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			   wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	(!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			     wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))))
-#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			  wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
-#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			    wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			 wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
-
-#define LUT_ANT_SWITCH_OP(lut, op, val) \
-	lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1)))
-#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			    wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	(!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			      wifi_req, wifi_prio, wifi_txrx, \
-			      wifi_sh_ant_req))))
-#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			   wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			  wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
-#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \
-			     wifi_prio, wifi_txrx, wifi_sh_ant_req) \
-	LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \
-			  wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req))
-
-static const __le32 iwlagn_def_3w_lookup[12] = {
+/* Notmal TDM */
+static const __le32 iwlagn_def_3w_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
 	cpu_to_le32(0xaaaaaaaa),
 	cpu_to_le32(0xaaaaaaaa),
 	cpu_to_le32(0xaeaaaaaa),
@@ -270,7 +202,25 @@ static const __le32 iwlagn_def_3w_lookup[12] = {
 	cpu_to_le32(0xf0005000),
 };
 
-static const __le32 iwlagn_concurrent_lookup[12] = {
+
+/* Loose Coex */
+static const __le32 iwlagn_loose_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xaeaaaaaa),
+	cpu_to_le32(0xaaaaaaaa),
+	cpu_to_le32(0xcc00ff28),
+	cpu_to_le32(0x0000aaaa),
+	cpu_to_le32(0xcc00aaaa),
+	cpu_to_le32(0x0000aaaa),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0x00000000),
+	cpu_to_le32(0xf0005000),
+	cpu_to_le32(0xf0005000),
+};
+
+/* Full concurrency */
+static const __le32 iwlagn_concurrent_lookup[IWLAGN_BT_DECISION_LUT_SIZE] = {
 	cpu_to_le32(0xaaaaaaaa),
 	cpu_to_le32(0xaaaaaaaa),
 	cpu_to_le32(0xaaaaaaaa),
@@ -325,6 +275,7 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv)
 
 	basic.kill_ack_mask = priv->kill_ack_mask;
 	basic.kill_cts_mask = priv->kill_cts_mask;
+	basic.reduce_txpower = priv->reduced_txpower;
 	basic.valid = priv->bt_valid;
 
 	/*
@@ -610,29 +561,62 @@ static void iwlagn_print_uartmsg(struct iwl_priv *priv,
 			BT_UART_MSG_FRAME7CONNECTABLE_POS);
 }
 
-static void iwlagn_set_kill_msk(struct iwl_priv *priv,
+static bool iwlagn_set_kill_msk(struct iwl_priv *priv,
 				struct iwl_bt_uart_m