Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - New drivers for MAX6697 and compatibles and for INA209.

 - Added support for IT8771E, IT8772E, MAX34460, MAX34461, MCP98244, and
   ADT7420 to existing drivers.

 - Added support for additional attributes to various drivers.

 - Replaced SENSORS_LIMIT with clamp_val; retire SENSORS_LIMIT;

 - Clean up PMBus code to reduce its size; clean up adt7410 driver.

 - A couple of minor bug fixes as well as documentation cleanup.

 - Out-of-tree change: Replace SENSORS_LIMIT with clamp_val in
   platform/x86/eeepc-laptop driver.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (32 commits)
  hwmon: (ntc_thermistor): Fix sparse warnings
  hwmon: (adt7410) Add device table entry for the adt7420
  hwmon: (adt7410) Use I2C_ADDRS helper macro
  hwmon: (adt7410) Use the SIMPLE_DEV_PM_OPS helper macro
  hwmon: (adt7410) Let suspend/resume depend on CONFIG_PM_SLEEP
  hwmon: (adt7410) Clear unwanted bits in the config register
  hwmon: (jc42) Add support for MCP98244
  hwmon: (pmbus) Clean up for code size reduction
  hwmon: (pmbus/max34440) Add support for MAX34460 and MAX34461
  hwmon: (pmbus) Add support for word status register
  hwmon: (pmbus/zl6100) Add support for VMON/VDRV
  hwmon: (pmbus) Add function to clear sensor cache
  hwmon: (pmbus) Add support for additional voltage sensor
  hwmon: (pmbus) Use krealloc to allocate attribute memory
  hwmon: (pmbus) Simplify memory allocation for sensor attributes
  hwmon: (pmbus) Improve boolean handling
  hwmon: (pmbus) Simplify memory allocation for labels and booleans
  hwmon: (pmbus) Use dev variable to represent client->dev
  hwmon: (pmbus) Fix 'Macros with multiple statements' checkpatch error
  hwmon: (pmbus) Drop unnecessary error messages in probe error path
  ...

82 files changed, 3048 insertions, 876 deletions

diff --git a/Documentation/devicetree/bindings/i2c/ina209.txt b/Documentation/devicetree/bindings/i2c/ina209.txt
new file mode 100644
index 00000000000..9dd2bee8084
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/ina209.txt
@@ -0,0 +1,18 @@
+ina209 properties
+
+Required properties:
+- compatible: Must be "ti,ina209"
+- reg: I2C address
+
+Optional properties:
+
+- shunt-resistor
+	Shunt resistor value in micro-Ohm
+
+Example:
+
+temp-sensor@4c {
+	compatible = "ti,ina209";
+	reg = <0x4c>;
+	shunt-resistor = <5000>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/max6697.txt b/Documentation/devicetree/bindings/i2c/max6697.txt
new file mode 100644
index 00000000000..5f793998e4a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/max6697.txt
@@ -0,0 +1,64 @@
+max6697 properties
+
+Required properties:
+- compatible:
+	Should be one of
+		maxim,max6581
+		maxim,max6602
+		maxim,max6622
+		maxim,max6636
+		maxim,max6689
+		maxim,max6693
+		maxim,max6694
+		maxim,max6697
+		maxim,max6698
+		maxim,max6699
+- reg: I2C address
+
+Optional properties:
+
+- smbus-timeout-disable
+	Set to disable SMBus timeout. If not specified, SMBus timeout will be
+	enabled.
+- extended-range-enable
+	Only valid for MAX6581. Set to enable extended temperature range.
+	Extended temperature will be disabled if not specified.
+- beta-compensation-enable
+	Only valid for MAX6693 and MX6694. Set to enable beta compensation on
+	remote temperature channel 1.
+	Beta compensation will be disabled if not specified.
+- alert-mask
+	Alert bit mask. Alert disabled for bits set.
+	Select bit 0 for local temperature, bit 1..7 for remote temperatures.
+	If not specified, alert will be enabled for all channels.
+- over-temperature-mask
+	Over-temperature bit mask. Over-temperature reporting disabled for
+	bits set.
+	Select bit 0 for local temperature, bit 1..7 for remote temperatures.
+	If not specified, over-temperature reporting will be enabled for all
+	channels.
+- resistance-cancellation
+	Boolean for all chips other than MAX6581. Set to enable resistance
+	cancellation on remote temperature channel 1.
+	For MAX6581, resistance cancellation enabled for all channels if
+	specified as boolean, otherwise as per bit mask specified.
+	Only supported for remote temperatures (bit 1..7).
+	If not specified, resistance cancellation will be disabled for all
+	channels.
+- transistor-ideality
+	For MAX6581 only. Two values; first is bit mask, second is ideality
+	select value as per MAX6581 data sheet. Select bit 1..7 for remote
+	channels.
+	Transistor ideality will be initialized to default (1.008) if not
+	specified.
+
+Example:
+
+temp-sensor@1a {
+	compatible = "maxim,max6697";
+	reg = <0x1a>;
+	smbus-timeout-disable;
+	resistance-cancellation;
+	alert-mask = <0x72>;
+	over-temperature-mask = <0x7f>;
+};
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index 3374c085678..fec5a9bf755 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -66,6 +66,7 @@ Process		Processor					TjMax(C)
 		i5 3470T					91
 
 32nm		Core i3/i5/i7 Processors
+		i7 2600						98
 		i7 660UM/640/620, 640LM/620, 620M, 610E		105
 		i5 540UM/520/430, 540M/520/450/430		105
 		i3 330E, 370M/350/330				90 rPGA, 105 BGA
@@ -79,7 +80,10 @@ Process		Processor					TjMax(C)
 		P4505/P4500 					90
 
 32nm		Atom Processors
+		S1260/1220					95
+		S1240						102
 		Z2460						90
+		Z2760						90
 		D2700/2550/2500					100
 		N2850/2800/2650/2600				100
 
@@ -98,6 +102,7 @@ Process		Processor					TjMax(C)
 
 45nm		Atom Processors
 		D525/510/425/410				100
+		K525/510/425/410				100
 		Z670/650					90
 		Z560/550/540/530P/530/520PT/520/515/510PT/510P	90
 		Z510/500					90
@@ -107,7 +112,11 @@ Process		Processor					TjMax(C)
 		330/230						125
 		E680/660/640/620				90
 		E680T/660T/640T/620T				110
+		E665C/645C					90
+		E665CT/645CT					110
 		CE4170/4150/4110				110
+		CE4200 series					unknown
+		CE5300 series					unknown
 
 45nm		Core2 Processors
 		Solo ULV SU3500/3300				100
diff --git a/Documentation/hwmon/ina209 b/Documentation/hwmon/ina209
new file mode 100644
index 00000000000..672501de450
--- /dev/null
+++ b/Documentation/hwmon/ina209
@@ -0,0 +1,93 @@
+Kernel driver ina209
+=====================
+
+Supported chips:
+  * Burr-Brown / Texas Instruments INA209
+    Prefix: 'ina209'
+    Addresses scanned: -
+    Datasheet:
+        http://www.ti.com/lit/gpn/ina209
+
+Author: Paul Hays <Paul.Hays@cattail.ca>
+Author: Ira W. Snyder <iws@ovro.caltech.edu>
+Author: Guenter Roeck <linux@roeck-us.net>
+
+
+Description
+-----------
+
+The TI / Burr-Brown INA209 monitors voltage, current, and power on the high side
+of a D.C. power supply. It can perform measurements and calculations in the
+background to supply readings at any time. It includes a programmable
+calibration multiplier to scale the displayed current and power values.
+
+
+Sysfs entries
+-------------
+
+The INA209 chip is highly configurable both via hardwiring and via
+the I2C bus. See the datasheet for details.
+
+This tries to expose most monitoring features of the hardware via
+sysfs. It does not support every feature of this chip.
+
+
+in0_input		shunt voltage (mV)
+in0_input_highest	shunt voltage historical maximum reading (mV)
+in0_input_lowest	shunt voltage historical minimum reading (mV)
+in0_reset_history	reset shunt voltage history
+in0_max			shunt voltage max alarm limit (mV)
+in0_min			shunt voltage min alarm limit (mV)
+in0_crit_max		shunt voltage crit max alarm limit (mV)
+in0_crit_min		shunt voltage crit min alarm limit (mV)
+in0_max_alarm		shunt voltage max alarm limit exceeded
+in0_min_alarm		shunt voltage min alarm limit exceeded
+in0_crit_max_alarm	shunt voltage crit max alarm limit exceeded
+in0_crit_min_alarm	shunt voltage crit min alarm limit exceeded
+
+in1_input		bus voltage (mV)
+in1_input_highest	bus voltage historical maximum reading (mV)
+in1_input_lowest	bus voltage historical minimum reading (mV)
+in1_reset_history	reset bus voltage history
+in1_max			bus voltage max alarm limit (mV)
+in1_min			bus voltage min alarm limit (mV)
+in1_crit_max		bus voltage crit max alarm limit (mV)
+in1_crit_min		bus voltage crit min alarm limit (mV)
+in1_max_alarm		bus voltage max alarm limit exceeded
+in1_min_alarm		bus voltage min alarm limit exceeded
+in1_crit_max_alarm	bus voltage crit max alarm limit exceeded
+in1_crit_min_alarm	bus voltage crit min alarm limit exceeded
+
+power1_input		power measurement (uW)
+power1_input_highest	power historical maximum reading (uW)
+power1_reset_history	reset power history
+power1_max		power max alarm limit (uW)
+power1_crit		power crit alarm limit (uW)
+power1_max_alarm	power max alarm limit exceeded
+power1_crit_alarm	power crit alarm limit exceeded
+
+curr1_input		current measurement (mA)
+
+update_interval		data conversion time; affects number of samples used
+			to average results for shunt and bus voltages.
+
+General Remarks
+---------------
+
+The power and current registers in this chip require that the calibration
+register is programmed correctly before they are used. Normally this is expected
+to be done in the BIOS. In the absence of BIOS programming, the shunt resistor
+voltage can be provided using platform data. The driver uses platform data from
+the ina2xx driver for this purpose. If calibration register data is not provided
+via platform data, the driver checks if the calibration register has been
+programmed (ie has a value not equal to zero). If so, this value is retained.
+Otherwise, a default value reflecting a shunt resistor value of 10 mOhm is
+programmed into the calibration register.
+
+
+Output Pins
+-----------
+
+Output pin programming is a board feature which depends on the BIOS. It is
+outside the scope of a hardware monitoring driver to enable or disable output
+pins.
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 8386aadc0a8..c263740f0cb 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -30,6 +30,14 @@ Supported chips:
     Prefix: 'it8728'
     Addresses scanned: from Super I/O config space (8 I/O ports)
     Datasheet: Not publicly available
+  * IT8771E
+    Prefix: 'it8771'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
+  * IT8772E
+    Prefix: 'it8772'
+    Addresses scanned: from Super I/O config space (8 I/O ports)
+    Datasheet: Not publicly available
   * IT8782F
     Prefix: 'it8782'
     Addresses scanned: from Super I/O config space (8 I/O ports)
@@ -83,8 +91,8 @@ Description
 -----------
 
 This driver implements support for the IT8705F, IT8712F, IT8716F,
-IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8781F, IT8782F,
-IT8783E/F, and SiS950 chips.
+IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E, IT8772E,
+IT8782F, IT8783E/F, and SiS950 chips.
 
 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
 joysticks and other miscellaneous stuff. For hardware monitoring, they
@@ -118,8 +126,8 @@ The IT8726F is just bit enhanced IT8716F with additional hardware
 for AMD power sequencing. Therefore the chip will appear as IT8716F
 to userspace applications.
 
-The IT8728F is considered compatible with the IT8721F, until a datasheet
-becomes available (hopefully.)
+The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F,
+until a datasheet becomes available (hopefully.)
 
 Temperatures are measured in degrees Celsius. An alarm is triggered once
 when the Overtemperature Shutdown limit is crossed.
diff --git a/Documentation/hwmon/jc42 b/Documentation/hwmon/jc42
index 66ecb9fc824..16507712123 100644
--- a/Documentation/hwmon/jc42
+++ b/Documentation/hwmon/jc42
@@ -17,12 +17,13 @@ Supported chips:
   * Maxim MAX6604
     Datasheets:
 	http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
-  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP9843
+  * Microchip MCP9804, MCP9805, MCP98242, MCP98243, MCP98244, MCP9843
     Datasheets:
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22203C.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21977b.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/21996a.pdf
 	http://ww1.microchip.com/downloads/en/DeviceDoc/22153c.pdf
+	http://ww1.microchip.com/downloads/en/DeviceDoc/22327A.pdf
   * NXP Semiconductors SE97, SE97B, SE98, SE98A
     Datasheets:
 	http://www.nxp.com/documents/data_sheet/SE97.pdf
diff --git a/Documentation/hwmon/lm73 b/Documentation/hwmon/lm73
new file mode 100644
index 00000000000..8af059dcb64
--- /dev/null
+++ b/Documentation/hwmon/lm73
@@ -0,0 +1,90 @@
+Kernel driver lm73
+==================
+
+Supported chips:
+  * Texas Instruments LM73
+    Prefix: 'lm73'
+    Addresses scanned: I2C 0x48, 0x49, 0x4a, 0x4c, 0x4d, and 0x4e
+    Datasheet: Publicly available at the Texas Instruments website
+               http://www.ti.com/product/lm73
+
+Author: Guillaume Ligneul <guillaume.ligneul@gmail.com>
+Documentation: Chris Verges <kg4ysn@gmail.com>
+
+
+Description
+-----------
+
+The LM73 is a digital temperature sensor.  All temperature values are
+given in degrees Celsius.
+
+Measurement Resolution Support
+------------------------------
+
+The LM73 supports four resolutions, defined in terms of degrees C per
+LSB: 0.25, 0.125, 0.0625, and 0.3125.  Changing the resolution mode
+affects the conversion time of the LM73's analog-to-digital converter.
+From userspace, the desired resolution can be specified as a function of
+conversion time via the 'update_interval' sysfs attribute for the
+device.  This attribute will normalize ranges of input values to the
+maximum times defined for the resolution in the datasheet.
+
+    Resolution    Conv. Time    Input Range
+    (C/LSB)       (msec)        (msec)
+    --------------------------------------
+    0.25          14             0..14
+    0.125         28            15..28
+    0.0625        56            29..56
+    0.03125       112           57..infinity
+    --------------------------------------
+
+The following examples show how the 'update_interval' attribute can be
+used to change the conversion time:
+
+    $ echo 0 > update_interval
+    $ cat update_interval
+    14
+    $ cat temp1_input
+    24250
+
+    $ echo 22 > update_interval
+    $ cat update_interval
+    28
+    $ cat temp1_input
+    24125
+
+    $ echo 56 > update_interval
+    $ cat update_interval
+    56
+    $ cat temp1_input
+    24062
+
+    $ echo 85 > update_interval
+    $ cat update_interval
+    112
+    $ cat temp1_input
+    24031
+
+As shown here, the lm73 driver automatically adjusts any user input for
+'update_interval' via a step function.  Reading back the
+'update_interval' value after a write operation will confirm the
+conversion time actively in use.
+
+Mathematically, the resolution can be derived from the conversion time
+via the following function:
+
+   g(x) = 0.250 * [log(x/14) / log(2)]
+
+where 'x' is the output from 'update_interval' and 'g(x)' is the
+resolution in degrees C per LSB.
+
+Alarm Support
+-------------
+
+The LM73 features a simple over-temperature alarm mechanism.  This
+feature is exposed via the sysfs attributes.
+
+The attributes 'temp1_max_alarm' and 'temp1_min_alarm' are flags
+provided by the LM73 that indicate whether the measured temperature has
+passed the 'temp1_max' and 'temp1_min' thresholds, respectively.  These
+values _must_ be read to clear the registers on the LM73.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
index 04482226db2..47651ff341a 100644
--- a/Documentation/hwmon/max34440
+++ b/Documentation/hwmon/max34440
@@ -16,6 +16,16 @@ Supported chips:
     Prefixes: 'max34446'
     Addresses scanned: -
     Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34446.pdf
+  * Maxim MAX34460
+    PMBus 12-Channel Voltage Monitor & Sequencer
+    Prefix: 'max34460'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34460.pdf
+  * Maxim MAX34461
+    PMBus 16-Channel Voltage Monitor & Sequencer
+    Prefix: 'max34461'
+    Addresses scanned: -
+    Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf
 
 Author: Guenter Roeck <guenter.roeck@ericsson.com>
 
@@ -26,6 +36,9 @@ Description
 This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
 Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager
 and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data Logger.
+It also supports the MAX34460 and MAX34461 PMBus Voltage Monitor & Sequencers.
+The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 voltage
+channels.
 
 The driver is a client driver to the core PMBus driver. Please see<