MIPS: PowerTV: Remove support code.

Nobody seems to care about this platform anymore and my attempts to find
somebody willing to provide some tlc for PowerTV have failed so far.

So let's nuke the bloody thing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5910/

45 files changed, 0 insertions, 5972 deletions

diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index d9d81c21925..6e239123d6f 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -20,7 +20,6 @@ platforms += mti-sead3
 platforms += netlogic
 platforms += pmcs-msp71xx
 platforms += pnx833x
-platforms += powertv
 platforms += ralink
 platforms += rb532
 platforms += sgi-ip22
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d2440478787..17cc7ff8458 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -415,23 +415,6 @@ config PMC_MSP
 	  of integrated peripherals, interfaces and DSPs in addition to
 	  a variety of MIPS cores.
 
-config POWERTV
-	bool "Cisco PowerTV"
-	select BOOT_ELF32
-	select CEVT_R4K
-	select CPU_MIPSR2_IRQ_VI
-	select CPU_MIPSR2_IRQ_EI
-	select CSRC_POWERTV
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_HIGHMEM
-	select USB_OHCI_LITTLE_ENDIAN
-	help
-	  This enables support for the Cisco PowerTV Platform.
-
 config RALINK
 	bool "Ralink based machines"
 	select CEVT_R4K
@@ -814,7 +797,6 @@ source "arch/mips/jz4740/Kconfig"
 source "arch/mips/lantiq/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmcs-msp71xx/Kconfig"
-source "arch/mips/powertv/Kconfig"
 source "arch/mips/ralink/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
@@ -893,9 +875,6 @@ config CSRC_BCM1480
 config CSRC_IOASIC
 	bool
 
-config CSRC_POWERTV
-	bool
-
 config CSRC_R4K
 	bool
 
diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
deleted file mode 100644
index 7fda0ce5f69..00000000000
--- a/arch/mips/configs/powertv_defconfig
+++ /dev/null
@@ -1,136 +0,0 @@
-CONFIG_POWERTV=y
-CONFIG_BOOTLOADER_FAMILY="R2"
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_1000=y
-CONFIG_PREEMPT=y
-# CONFIG_SECCOMP is not set
-CONFIG_EXPERIMENTAL=y
-CONFIG_CROSS_COMPILE=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_RD_GZIP is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_EPOLL is not set
-# CONFIG_SIGNALFD is not set
-# CONFIG_EVENTFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_SLUB_DEBUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_INET6_AH=y
-CONFIG_INET6_ESP=y
-CONFIG_INET6_IPCOMP=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_IPV6_TUNNEL=y
-CONFIG_NETFILTER=y
-# CONFIG_BRIDGE_NETFILTER is not set
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
-CONFIG_IP_NF_IPTABLES=y
-CONFIG_IP_NF_FILTER=y
-CONFIG_IP_NF_ARPTABLES=y
-CONFIG_IP_NF_ARPFILTER=y
-CONFIG_IP6_NF_IPTABLES=y
-CONFIG_IP6_NF_FILTER=y
-CONFIG_BRIDGE=y
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_TBF=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_WLAN is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
-# CONFIG_VGA_ARB is not set
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_CP210X=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_FUSE_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/mips/include/asm/mach-powertv/asic.h b/arch/mips/include/asm/mach-powertv/asic.h
deleted file mode 100644
index b341108d12f..00000000000
--- a/arch/mips/include/asm/mach-powertv/asic.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_ASIC_H
-#define _ASM_MACH_POWERTV_ASIC_H
-
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <asm/mach-powertv/asic_regs.h>
-
-#define DVR_CAPABLE	(1<<0)
-#define PCIE_CAPABLE	(1<<1)
-#define FFS_CAPABLE	(1<<2)
-#define DISPLAY_CAPABLE (1<<3)
-
-/* Platform Family types
- * For compitability, the new value must be added in the end */
-enum family_type {
-	FAMILY_8500,
-	FAMILY_8500RNG,
-	FAMILY_4500,
-	FAMILY_1500,
-	FAMILY_8600,
-	FAMILY_4600,
-	FAMILY_4600VZA,
-	FAMILY_8600VZB,
-	FAMILY_1500VZE,
-	FAMILY_1500VZF,
-	FAMILY_8700,
-	FAMILIES
-};
-
-/* Register maps for each ASIC */
-extern const struct register_map calliope_register_map;
-extern const struct register_map cronus_register_map;
-extern const struct register_map gaia_register_map;
-extern const struct register_map zeus_register_map;
-
-extern struct resource dvr_cronus_resources[];
-extern struct resource dvr_gaia_resources[];
-extern struct resource dvr_zeus_resources[];
-extern struct resource non_dvr_calliope_resources[];
-extern struct resource non_dvr_cronus_resources[];
-extern struct resource non_dvr_cronuslite_resources[];
-extern struct resource non_dvr_gaia_resources[];
-extern struct resource non_dvr_vz_calliope_resources[];
-extern struct resource non_dvr_vze_calliope_resources[];
-extern struct resource non_dvr_vzf_calliope_resources[];
-extern struct resource non_dvr_zeus_resources[];
-
-extern void powertv_platform_init(void);
-extern void platform_alloc_bootmem(void);
-extern enum asic_type platform_get_asic(void);
-extern enum family_type platform_get_family(void);
-extern int platform_supports_dvr(void);
-extern int platform_supports_ffs(void);
-extern int platform_supports_pcie(void);
-extern int platform_supports_display(void);
-extern void configure_platform(void);
-
-/* Platform Resources */
-#define ASIC_RESOURCE_GET_EXISTS 1
-extern struct resource *asic_resource_get(const char *name);
-extern void platform_release_memory(void *baddr, int size);
-
-/* USB configuration */
-struct usb_hcd;			/* Forward reference */
-extern void platform_configure_usb_ehci(void);
-extern void platform_unconfigure_usb_ehci(void);
-extern void platform_configure_usb_ohci(void);
-extern void platform_unconfigure_usb_ohci(void);
-
-/* Resource for ASIC registers */
-extern struct resource asic_resource;
-extern int platform_usb_devices_init(struct platform_device **echi_dev,
-	struct platform_device **ohci_dev);
-
-/* Reboot Cause */
-extern void set_reboot_cause(char code, unsigned int data, unsigned int data2);
-extern void set_locked_reboot_cause(char code, unsigned int data,
-	unsigned int data2);
-
-enum sys_reboot_type {
-	sys_unknown_reboot = 0x00,	/* Unknown reboot cause */
-	sys_davic_change = 0x01,	/* Reboot due to change in DAVIC
-					 * mode */
-	sys_user_reboot = 0x02,		/* Reboot initiated by user */
-	sys_system_reboot = 0x03,	/* Reboot initiated by OS */
-	sys_trap_reboot = 0x04,		/* Reboot due to a CPU trap */
-	sys_silent_reboot = 0x05,	/* Silent reboot */
-	sys_boot_ldr_reboot = 0x06,	/* Bootloader reboot */
-	sys_power_up_reboot = 0x07,	/* Power on bootup.  Older
-					 * drivers may report as
-					 * userReboot. */
-	sys_code_change = 0x08,		/* Reboot to take code change.
-					 * Older drivers may report as
-					 * userReboot. */
-	sys_hardware_reset = 0x09,	/* HW watchdog or front-panel
-					 * reset button reset.	Older
-					 * drivers may report as
-					 * userReboot. */
-	sys_watchdogInterrupt = 0x0A	/* Pre-watchdog interrupt */
-};
-
-#endif /* _ASM_MACH_POWERTV_ASIC_H */
diff --git a/arch/mips/include/asm/mach-powertv/asic_reg_map.h b/arch/mips/include/asm/mach-powertv/asic_reg_map.h
deleted file mode 100644
index 20348e817b0..00000000000
--- a/arch/mips/include/asm/mach-powertv/asic_reg_map.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *				asic_reg_map.h
- *
- * A macro-enclosed list of the elements for the register_map structure for
- * use in defining and manipulating the structure.
- *
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-REGISTER_MAP_ELEMENT(eic_slow0_strt_add)
-REGISTER_MAP_ELEMENT(eic_cfg_bits)
-REGISTER_MAP_ELEMENT(eic_ready_status)
-REGISTER_MAP_ELEMENT(chipver3)
-REGISTER_MAP_ELEMENT(chipver2)
-REGISTER_MAP_ELEMENT(chipver1)
-REGISTER_MAP_ELEMENT(chipver0)
-REGISTER_MAP_ELEMENT(uart1_intstat)
-REGISTER_MAP_ELEMENT(uart1_inten)
-REGISTER_MAP_ELEMENT(uart1_config1)
-REGISTER_MAP_ELEMENT(uart1_config2)
-REGISTER_MAP_ELEMENT(uart1_divisorhi)
-REGISTER_MAP_ELEMENT(uart1_divisorlo)
-REGISTER_MAP_ELEMENT(uart1_data)
-REGISTER_MAP_ELEMENT(uart1_status)
-REGISTER_MAP_ELEMENT(int_stat_3)
-REGISTER_MAP_ELEMENT(int_stat_2)
-REGISTER_MAP_ELEMENT(int_stat_1)
-REGISTER_MAP_ELEMENT(int_stat_0)
-REGISTER_MAP_ELEMENT(int_config)
-REGISTER_MAP_ELEMENT(int_int_scan)
-REGISTER_MAP_ELEMENT(ien_int_3)
-REGISTER_MAP_ELEMENT(ien_int_2)
-REGISTER_MAP_ELEMENT(ien_int_1)
-REGISTER_MAP_ELEMENT(ien_int_0)
-REGISTER_MAP_ELEMENT(int_level_3_3)
-REGISTER_MAP_ELEMENT(int_level_3_2)
-REGISTER_MAP_ELEMENT(int_level_3_1)
-REGISTER_MAP_ELEMENT(int_level_3_0)
-REGISTER_MAP_ELEMENT(int_level_2_3)
-REGISTER_MAP_ELEMENT(int_level_2_2)
-REGISTER_MAP_ELEMENT(int_level_2_1)
-REGISTER_MAP_ELEMENT(int_level_2_0)
-REGISTER_MAP_ELEMENT(int_level_1_3)
-REGISTER_MAP_ELEMENT(int_level_1_2)
-REGISTER_MAP_ELEMENT(int_level_1_1)
-REGISTER_MAP_ELEMENT(int_level_1_0)
-REGISTER_MAP_ELEMENT(int_level_0_3)
-REGISTER_MAP_ELEMENT(int_level_0_2)
-REGISTER_MAP_ELEMENT(int_level_0_1)
-REGISTER_MAP_ELEMENT(int_level_0_0)
-REGISTER_MAP_ELEMENT(int_docsis_en)
-REGISTER_MAP_ELEMENT(mips_pll_setup)
-REGISTER_MAP_ELEMENT(fs432x4b4_usb_ctl)
-REGISTER_MAP_ELEMENT(test_bus)
-REGISTER_MAP_ELEMENT(crt_spare)
-REGISTER_MAP_ELEMENT(usb2_ohci_int_mask)
-REGISTER_MAP_ELEMENT(usb2_strap)
-REGISTER_MAP_ELEMENT(ehci_hcapbase)
-REGISTER_MAP_ELEMENT(ohci_hc_revision)
-REGISTER_MAP_ELEMENT(bcm1_bs_lmi_steer)
-REGISTER_MAP_ELEMENT(usb2_control)
-REGISTER_MAP_ELEMENT(usb2_stbus_obc)
-REGISTER_MAP_ELEMENT(usb2_stbus_mess_size)
-REGISTER_MAP_ELEMENT(usb2_stbus_chunk_size)
-REGISTER_MAP_ELEMENT(pcie_regs)
-REGISTER_MAP_ELEMENT(tim_ch)
-REGISTER_MAP_ELEMENT(tim_cl)
-REGISTER_MAP_ELEMENT(gpio_dout)
-REGISTER_MAP_ELEMENT(gpio_din)
-REGISTER_MAP_ELEMENT(gpio_dir)
-REGISTER_MAP_ELEMENT(watchdog)
-REGISTER_MAP_ELEMENT(front_panel)
-REGISTER_MAP_ELEMENT(misc_clk_ctl1)
-REGISTER_MAP_ELEMENT(misc_clk_ctl2)
-REGISTER_MAP_ELEMENT(crt_ext_ctl)
-REGISTER_MAP_ELEMENT(register_maps)
diff --git a/arch/mips/include/asm/mach-powertv/asic_regs.h b/arch/mips/include/asm/mach-powertv/asic_regs.h
deleted file mode 100644
index 06712abb3e5..00000000000
--- a/arch/mips/include/asm/mach-powertv/asic_regs.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __ASM_MACH_POWERTV_ASIC_H_
-#define __ASM_MACH_POWERTV_ASIC_H_
-#include <linux/io.h>
-
-/* ASIC types */
-enum asic_type {
-	ASIC_UNKNOWN,
-	ASIC_ZEUS,
-	ASIC_CALLIOPE,
-	ASIC_CRONUS,
-	ASIC_CRONUSLITE,
-	ASIC_GAIA,
-	ASICS			/* Number of supported ASICs */
-};
-
-/* hardcoded values read from Chip Version registers */
-#define CRONUS_10	0x0B4C1C20
-#define CRONUS_11	0x0B4C1C21
-#define CRONUSLITE_10	0x0B4C1C40
-
-#define NAND_FLASH_BASE		0x03000000
-#define CALLIOPE_IO_BASE	0x08000000
-#define GAIA_IO_BASE		0x09000000
-#define CRONUS_IO_BASE		0x09000000
-#define ZEUS_IO_BASE		0x09000000
-
-#define ASIC_IO_SIZE		0x01000000
-
-/* Definitions for backward compatibility */
-#define UART1_INTSTAT	uart1_intstat
-#define UART1_INTEN	uart1_inten
-#define UART1_CONFIG1	uart1_config1
-#define UART1_CONFIG2	uart1_config2
-#define UART1_DIVISORHI uart1_divisorhi
-#define UART1_DIVISORLO uart1_divisorlo
-#define UART1_DATA	uart1_data
-#define UART1_STATUS	uart1_status
-
-/* ASIC register enumeration */
-union register_map_entry {
-	unsigned long phys;
-	u32 *virt;
-};
-
-#define REGISTER_MAP_ELEMENT(x) union register_map_entry x;
-struct register_map {
-#include <asm/mach-powertv/asic_reg_map.h>
-};
-#undef REGISTER_MAP_ELEMENT
-
-/**
- * register_map_offset_phys - add an offset to the physical address
- * @map:	Pointer to the &struct register_map
- * @offset:	Value to add
- *
- * Only adds the base to non-zero physical addresses
- */
-static inline void register_map_offset_phys(struct register_map *map,
-	unsigned long offset)
-{
-#define REGISTER_MAP_ELEMENT(x)		do {				\
-		if (map->x.phys != 0)					\
-			map->x.phys += offset;				\
-	} while (false);
-
-#include <asm/mach-powertv/asic_reg_map.h>
-#undef REGISTER_MAP_ELEMENT
-}
-
-/**
- * register_map_virtualize - Convert &register_map to virtual addresses
- * @map:	Pointer to &register_map to virtualize
- */
-static inline void register_map_virtualize(struct register_map *map)
-{
-#define REGISTER_MAP_ELEMENT(x)		do {				\
-		map->x.virt = (!map->x.phys) ? NULL :			\
-			UNCAC_ADDR(phys_to_virt(map->x.phys));		\
-	} while (false);
-
-#include <asm/mach-powertv/asic_reg_map.h>
-#undef REGISTER_MAP_ELEMENT
-}
-
-extern struct register_map _asic_register_map;
-extern unsigned long asic_phy_base;
-
-/*
- * Macros to interface to registers through their ioremapped address
- * asic_reg_phys_addr	Returns the physical address of the given register
- * asic_reg_addr	Returns the iomapped virtual address of the given
- *			register.
- */
-#define asic_reg_addr(x)	(_asic_register_map.x.virt)
-#define asic_reg_phys_addr(x)	(virt_to_phys((void *) CAC_ADDR(	\
-					(unsigned long) asic_reg_addr(x))))
-
-/*
- * The asic_reg macro is gone. It should be replaced by either asic_read or
- * asic_write, as appropriate.
- */
-
-#define asic_read(x)		readl(asic_reg_addr(x))
-#define asic_write(v, x)	writel(v, asic_reg_addr(x))
-
-extern void asic_irq_init(void);
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h b/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h
deleted file mode 100644
index 58c76ec32a1..00000000000
--- a/arch/mips/include/asm/mach-powertv/cpu-feature-overrides.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2010  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_
-#define _ASM_MACH_POWERTV_CPU_FEATURE_OVERRIDES_H_
-#define cpu_has_tlb			1
-#define cpu_has_4kex			1
-#define cpu_has_3k_cache		0
-#define cpu_has_4k_cache		1
-#define cpu_has_tx39_cache		0
-#define cpu_has_fpu			0
-#define cpu_has_counter			1
-#define cpu_has_watch			1
-#define cpu_has_divec			1
-#define cpu_has_vce			0
-#define cpu_has_cache_cdex_p		0
-#define cpu_has_cache_cdex_s		0
-#define cpu_has_mcheck			1
-#define cpu_has_ejtag			1
-#define cpu_has_llsc			1
-#define cpu_has_mips16			0
-#define cpu_has_mdmx			0
-#define cpu_has_mips3d			0
-#define cpu_has_smartmips		0
-#define cpu_has_vtag_icache		0
-#define cpu_has_dc_aliases		0
-#define cpu_has_ic_fills_f_dc		0
-#define cpu_has_mips32r1		0
-#define cpu_has_mips32r2		1
-#define cpu_has_mips64r1		0
-#define cpu_has_mips64r2		0
-#define cpu_has_dsp			0
-#define cpu_has_dsp2			0
-#define cpu_has_mipsmt			0
-#define cpu_has_userlocal		0
-#define cpu_has_nofpuex			0
-#define cpu_has_64bits			0
-#define cpu_has_64bit_zero_reg		0
-#define cpu_has_vint			1
-#define cpu_has_veic			1
-#define cpu_has_inclusive_pcaches	0
-
-#define cpu_dcache_line_size()		32
-#define cpu_icache_line_size()		32
-#endif
diff --git a/arch/mips/include/asm/mach-powertv/dma-coherence.h b/arch/mips/include/asm/mach-powertv/dma-coherence.h
deleted file mode 100644
index 5d4c3fe0472..00000000000
--- a/arch/mips/include/asm/mach-powertv/dma-coherence.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Version from mach-generic modified to support PowerTV port
- * Portions Copyright (C) 2009	Cisco Systems, Inc.
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-
-#ifndef __ASM_MACH_POWERTV_DMA_COHERENCE_H
-#define __ASM_MACH_POWERTV_DMA_COHERENCE_H
-
-#include <linux/sched.h>
-#include <linux/device.h>
-#include <asm/mach-powertv/asic.h>
-
-static inline bool is_kseg2(void *addr)
-{
-	return (unsigned long)addr >= KSEG2;
-}
-
-static inline unsigned long virt_to_phys_from_pte(void *addr)
-{
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *ptep, pte;
-
-	unsigned long virt_addr = (unsigned long)addr;
-	unsigned long phys_addr = 0UL;
-
-	/* get the page global directory. */
-	pgd = pgd_offset_k(virt_addr);
-
-	if (!pgd_none(*pgd)) {
-		/* get the page upper directory */
-		pud = pud_offset(pgd, virt_addr);
-		if (!pud_none(*pud)) {
-			/* get the page middle directory */
-			pmd = pmd_offset(pud, virt_addr);
-			if (!pmd_none(*pmd)) {
-				/* get a pointer to the page table entry */
-				ptep = pte_offset(pmd, virt_addr);
-				pte = *ptep;
-				/* check for a valid page */
-				if (pte_present(pte)) {
-					/* get the physical address the page is
-					 * referring to */
-					phys_addr = (unsigned long)
-						page_to_phys(pte_page(pte));
-					/* add the offset within the page */
-					phys_addr |= (virt_addr & ~PAGE_MASK);
-				}
-			}
-		}
-	}
-
-	return phys_addr;
-}
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	if (is_kseg2(addr))
-		return phys_to_dma(virt_to_phys_from_pte(addr));
-	else
-		return phys_to_dma(virt_to_phys(addr));
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return phys_to_dma(page_to_phys(page));
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_to_phys(dma_addr);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_POWERTV_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h
deleted file mode 100644
index 6c463be6215..00000000000
--- a/arch/mips/include/asm/mach-powertv/interrupts.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (C) 2009  Cisco Systems, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.