[SCSI] aci94xx: implement link rate setting

This patch implements the ability to set the minimum and maximum
linkrates for both libsas (for expanders) and aic94xx (for the host
phys).  It also tidies up the setting of the hardware min and max to
make sure they're updated when the expander emits a change broadcast.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

8 files changed, 95 insertions, 21 deletions

diff --git a/drivers/scsi/aic94xx/aic94xx.h b/drivers/scsi/aic94xx/aic94xx.h
index cb7caf1c9ce..1bd5b4ecf3d 100644
--- a/drivers/scsi/aic94xx/aic94xx.h
+++ b/drivers/scsi/aic94xx/aic94xx.h
@@ -109,6 +109,6 @@ int  asd_clear_nexus_port(struct asd_sas_port *port);
 int  asd_clear_nexus_ha(struct sas_ha_struct *sas_ha);
 
 /* ---------- Phy Management ---------- */
-int  asd_control_phy(struct asd_sas_phy *phy, enum phy_func func);
+int  asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg);
 
 #endif
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index ef8ca08b545..7ee49b51b72 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -52,6 +52,8 @@
 
 static inline void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
 {
+	struct sas_phy *sas_phy = phy->sas_phy.phy;
+
 	switch (oob_mode & 7) {
 	case PHY_SPEED_60:
 		/* FIXME: sas transport class doesn't have this */
@@ -67,6 +69,12 @@ static inline void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
 		phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
 		break;
 	}
+	sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
+	sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
+	sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+	sas_phy->maximum_linkrate = phy->phy_desc->max_sas_lrate;
+	sas_phy->minimum_linkrate = phy->phy_desc->min_sas_lrate;
+
 	if (oob_mode & SAS_MODE)
 		phy->sas_phy.oob_mode = SAS_OOB_MODE;
 	else if (oob_mode & SATA_MODE)
@@ -710,14 +718,32 @@ static const int phy_func_table[] = {
 	[PHY_FUNC_RELEASE_SPINUP_HOLD] = RELEASE_SPINUP_HOLD,
 };
 
-int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func)
+int asd_control_phy(struct asd_sas_phy *phy, enum phy_func func, void *arg)
 {
 	struct asd_ha_struct *asd_ha = phy->ha->lldd_ha;
+	struct asd_phy_desc *pd = asd_ha->phys[phy->id].phy_desc;
 	struct asd_ascb *ascb;
+	struct sas_phy_linkrates *rates;
 	int res = 1;
 
-	if (func == PHY_FUNC_CLEAR_ERROR_LOG)
+	switch (func) {
+	case PHY_FUNC_CLEAR_ERROR_LOG:
 		return -ENOSYS;
+	case PHY_FUNC_SET_LINK_RATE:
+		rates = arg;
+		if (rates->minimum_linkrate) {
+			pd->min_sas_lrate = rates->minimum_linkrate;
+			pd->min_sata_lrate = rates->minimum_linkrate;
+		}
+		if (rates->maximum_linkrate) {
+			pd->max_sas_lrate = rates->maximum_linkrate;
+			pd->max_sata_lrate = rates->maximum_linkrate;
+		}
+		func = PHY_FUNC_LINK_RESET;
+		break;
+	default:
+		break;
+	}
 
 	ascb = asd_ascb_alloc_list(asd_ha, &res, GFP_KERNEL);
 	if (!ascb)
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 02e796ee027..30b8014bcc7 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -187,10 +187,10 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 	phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
 	phy->phy->identify.target_port_protocols = phy->attached_tproto;
 	phy->phy->identify.phy_identifier = phy_id;
-	phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-	phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
-	phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
-	phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+	phy->phy->minimum_linkrate_hw = dr->hmin_linkrate;
+	phy->phy->maximum_linkrate_hw = dr->hmax_linkrate;
+	phy->phy->minimum_linkrate = dr->pmin_linkrate;
+	phy->phy->maximum_linkrate = dr->pmax_linkrate;
 	phy->phy->negotiated_linkrate = phy->linkrate;
 
 	if (!rediscover)
@@ -404,7 +404,8 @@ out:
 #define PC_RESP_SIZE 8
 
 int sas_smp_phy_control(struct domain_device *dev, int phy_id,
-			enum phy_func phy_func)
+			enum phy_func phy_func,
+			struct sas_phy_linkrates *rates)
 {
 	u8 *pc_req;
 	u8 *pc_resp;
@@ -423,6 +424,10 @@ int sas_smp_phy_control(struct domain_device *dev, int phy_id,
 	pc_req[1] = SMP_PHY_CONTROL;
 	pc_req[9] = phy_id;
 	pc_req[10]= phy_func;
+	if (rates) {
+		pc_req[32] = rates->minimum_linkrate << 4;
+		pc_req[33] = rates->maximum_linkrate << 4;
+	}
 
 	res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp,PC_RESP_SIZE);
 
@@ -436,7 +441,7 @@ static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
 	struct expander_device *ex = &dev->ex_dev;
 	struct ex_phy *phy = &ex->ex_phy[phy_id];
 
-	sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE);
+	sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL);
 	phy->linkrate = SAS_PHY_DISABLED;
 }
 
@@ -731,7 +736,7 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 
 	/* Phy state */
 	if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) {
-		if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET))
+		if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL))
 			res = sas_ex_phy_discover(dev, phy_id);
 		if (res)
 			return res;
@@ -1706,6 +1711,7 @@ static int sas_rediscover_dev(struct domain_device *dev, int phy_id)
 		   SAS_ADDR(phy->attached_sas_addr)) {
 		SAS_DPRINTK("ex %016llx phy 0x%x broadcast flutter\n",
 			    SAS_ADDR(dev->sas_addr), phy_id);
+		sas_ex_phy_discover(dev, phy_id);
 	} else
 		res = sas_discover_new(dev, phy_id);
 out:
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index b961664b810..c836a237fb7 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -159,17 +159,57 @@ static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
 		struct sas_internal *i =
 			to_sas_internal(sas_ha->core.shost->transportt);
 
-		ret = i->dft->lldd_control_phy(asd_phy, reset_type);
+		ret = i->dft->lldd_control_phy(asd_phy, reset_type, NULL);
 	} else {
 		struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
 		struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
-		ret = sas_smp_phy_control(ddev, phy->number, reset_type);
+		ret = sas_smp_phy_control(ddev, phy->number, reset_type, NULL);
 	}
 	return ret;
 }
 
+static int sas_set_phy_speed(struct sas_phy *phy,
+			     struct sas_phy_linkrates *rates)
+{
+	int ret;
+
+	if ((rates->minimum_linkrate &&
+	     rates->minimum_linkrate > phy->maximum_linkrate) ||
+	    (rates->maximum_linkrate &&
+	     rates->maximum_linkrate < phy->minimum_linkrate))
+		return -EINVAL;
+
+	if (rates->minimum_linkrate &&
+	    rates->minimum_linkrate < phy->minimum_linkrate_hw)
+		rates->minimum_linkrate = phy->minimum_linkrate_hw;
+
+	if (rates->maximum_linkrate &&
+	    rates->maximum_linkrate > phy->maximum_linkrate_hw)
+		rates->maximum_linkrate = phy->maximum_linkrate_hw;
+
+	if (scsi_is_sas_phy_local(phy)) {
+		struct Scsi_Host *shost = dev_to_shost(phy->dev.parent);
+		struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+		struct asd_sas_phy *asd_phy = sas_ha->sas_phy[phy->number];
+		struct sas_internal *i =
+			to_sas_internal(sas_ha->core.shost->transportt);
+
+		ret = i->dft->lldd_control_phy(asd_phy, PHY_FUNC_SET_LINK_RATE,
+					       rates);
+	} else {
+		struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
+		struct domain_device *ddev = sas_find_dev_by_rphy(rphy);
+		ret = sas_smp_phy_control(ddev, phy->number,
+					  PHY_FUNC_LINK_RESET, rates);
+
+	}
+
+	return ret;
+}
+
 static struct sas_function_template sft = {
 	.phy_reset = sas_phy_reset,
+	.set_phy_speed = sas_set_phy_speed,
 	.get_linkerrors = sas_get_linkerrors,
 };
 
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 0d69ede4b94..bffcee47492 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -70,7 +70,7 @@ int sas_notify_lldd_dev_found(struct domain_device *);
 void sas_notify_lldd_dev_gone(struct domain_device *);
 
 int sas_smp_phy_control(struct domain_device *dev, int phy_id,
-			enum phy_func phy_func);
+			enum phy_func phy_func, struct sas_phy_linkrates *);
 int sas_smp_get_phy_events(struct sas_phy *phy);
 
 struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy);
diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c
index 024ab00e70d..9340cdbae4a 100644
--- a/drivers/scsi/libsas/sas_phy.c
+++ b/drivers/scsi/libsas/sas_phy.c
@@ -67,13 +67,14 @@ static void sas_phye_oob_error(void *data)
 		switch (phy->error) {
 		case 1:
 		case 2:
-			i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET);
+			i->dft->lldd_control_phy(phy, PHY_FUNC_HARD_RESET,
+						 NULL);
 			break;
 		case 3:
 		default:
 			phy->error = 0;
 			phy->enabled = 0;
-			i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE);
+			i->dft->lldd_control_phy(phy, PHY_FUNC_DISABLE, NULL);
 			break;
 		}
 	}
@@ -90,7 +91,7 @@ static void sas_phye_spinup_hold(void *data)
 			&phy->phy_events_pending);
 
 	phy->error = 0;
-	i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD);
+	i->dft->lldd_control_phy(phy, PHY_FUNC_RELEASE_SPINUP_HOLD, NULL);
 }
 
 /* ---------- Phy class registration ---------- */
@@ -144,10 +145,10 @@ int sas_register_phys(struct sas_ha_struct *sas_ha)
 		phy->phy->identify.target_port_protocols = phy->tproto;
 		phy->phy->identify.sas_address = SAS_ADDR(sas_ha->sas_addr);
 		phy->phy->identify.phy_identifier = i;
-		phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
-		phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_3_0_GBPS;
-		phy->phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
-		phy->phy->maximum_linkrate = SAS_LINK_RATE_3_0_GBPS;
+		phy->phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+		phy->phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+		phy->phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
+		phy->phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
 		phy->phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
 
 		sas_phy_add(phy->phy);
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 8d91313dd88..8e39982fc3d 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -586,7 +586,7 @@ struct sas_domain_function_template {
 	int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
 
 	/* Phy management */
-	int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func);
+	int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
 };
 
 extern int sas_register_ha(struct sas_ha_struct *);
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 9c8a5b91ae6..2f4b6afa34f 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -121,6 +121,7 @@ enum phy_func {
 	PHY_FUNC_CLEAR_AFFIL,
 	PHY_FUNC_TX_SATA_PS_SIGNAL,
 	PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+	PHY_FUNC_SET_LINK_RATE,
 };
 
 /* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.