Merge tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "People are back from the holiday breaks, and it shows.  Here are a
  bunch of fixes for a number of platforms:
   - A couple of small fixes for Nomadik
   - A larger set of changes for kirkwood/mvebu
     - uart driver selection, dt clocks, gpio-poweroff fixups, a few
       __init annotation fixes and some error handling improvement in
       their xor dma driver.
   - i.MX had a couple of minor fixes (and a critical one for flexcan2
     clock setup)
   - MXS has a small board fix and a framebuffer bugfix
   - A set of fixes for Samsung Exynos, fixing default bootargs and some
     Exynos5440 clock issues
   - A set of OMAP changes including PM fixes and a few sparse warning
     fixups

  All in all a bit more positive code delta than we'd ideally want to
  see here, mostly from the OMAP PM changes, but nothing overly crazy."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: clps711x: Fix bad merge of clockevents setup
  ARM: highbank: save and restore L2 cache and GIC on suspend
  ARM: highbank: add a power request clear
  ARM: highbank: fix secondary boot and hotplug
  ARM: highbank: fix typos with hignbank in power request functions
  ARM: dts: fix highbank cpu mpidr values
  ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  pinctrl: mvebu: make pdma clock on dove mandatory
  ARM: Dove: Add pinctrl clock to DT
  dma: mv_xor: fix error handling for clocks
  dma: mv_xor: fix error handling of mv_xor_channel_add()
  arm: mvebu: Add missing ; for cpu node.
  arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
  arm: mvebu: Armada XP MV78230 has two cores, not one
  clk: mvebu: Remove inappropriate __init tagging
  ARM: Kirkwood: Use fixed-regulator instead of board gpio call
  ARM: Kirkwood: Fix missing sdio clock
  ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
  ...

53 files changed, 351 insertions, 183 deletions

diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt
index baadbb11fe9..5083c0b834b 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt
@@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 32 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006c000 {
diff --git a/Documentation/devicetree/bindings/clock/imx25-clock.txt b/Documentation/devicetree/bindings/clock/imx25-clock.txt
index c2a3525ecb4..db4f2f05c4d 100644
--- a/Documentation/devicetree/bindings/clock/imx25-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx25-clock.txt
@@ -146,10 +146,6 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
-	clock-output-names = ...
-			"uart_ipg",
-			"uart_serial",
-			...;
 };
 
 uart1: serial@43f90000 {
diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt
index 52a49a4a50b..e6587af62ff 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt
@@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
-	clock-output-names =
-		...
-		"uart",		/* 45 */
-		...
-		"end_of_list";
 };
 
 auart0: serial@8006a000 {
diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index d77b4e68dc4..f73fdf59556 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -211,10 +211,6 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
-	clock-output-names = ...
-			     "uart_ipg",
-			     "uart_serial",
-			     ...;
 };
 
 uart1: serial@02020000 {
diff --git a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
index 558cdf3c9ab..d4eab9227ea 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt
@@ -1,4 +1,19 @@
-GPIO line that should be set high/low to power off a device
+Driver a GPIO line that can be used to turn the power off.
+
+The driver supports both level triggered and edge triggered power off.
+At driver load time, the driver will request the given gpio line and
+install a pm_power_off handler. If the optional properties 'input' is
+not found, the GPIO line will be driven in the inactive
+state. Otherwise its configured as an input.
+
+When the pm_power_off is called, the gpio is configured as an output,
+and drive active, so triggering a level triggered power off
+condition. This will also cause an inactive->active edge condition, so
+triggering positive edge triggered power off. After a delay of 100ms,
+the GPIO is set to inactive, thus causing an active->inactive edge,
+triggering negative edge triggered power off. After another 100ms
+delay the GPIO is driver active again. If the power is still on and
+the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
 
 Required properties:
 - compatible : should be "gpio-poweroff".
@@ -13,10 +28,9 @@ Optional properties:
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 
-
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
+	gpios = <&gpio 4 0>;
 };
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f95ba14ae3d..ab864d9545d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -371,7 +371,6 @@ config ARCH_CNS3XXX
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
 	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
 	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select COMMON_CLK
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index cf6c48a09ea..4c0abe85405 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -50,17 +50,19 @@
 		ranges;
 
 		serial@d0012000 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012000 0x100>;
 				reg-shift = <2>;
 				interrupts = <41>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012100 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012100 0x100>;
 				reg-shift = <2>;
 				interrupts = <42>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index c45c7b4dc35..271855a6e22 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -34,7 +34,14 @@
 		reg = <0>;
 		clocks = <&cpuclk 0>;
 	    };
-	}
+
+	    cpu@1 {
+		device_type = "cpu";
+		compatible = "marvell,sheeva-v7";
+		reg = <1>;
+		clocks = <&cpuclk 1>;
+	    };
+	};
 
 	soc {
 		pinctrl {
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index a2aee570737..1c1937dbce7 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -85,5 +85,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index da03a129243..4905cf3a5ef 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -100,5 +100,13 @@
 			#interrupts-cells = <2>;
 			interrupts = <24>;
 		};
+
+		ethernet@d0034000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0xd0034000 0x2500>;
+				interrupts = <14>;
+				clocks = <&gateclk 1>;
+				status = "disabled";
+		};
 	};
  };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 367aa3f9491..2e37ef101c9 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -42,17 +42,19 @@
 
 	soc {
 		serial@d0012200 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012200 0x100>;
 				reg-shift = <2>;
 				interrupts = <43>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 		serial@d0012300 {
-				compatible = "ns16550";
+				compatible = "snps,dw-apb-uart";
 				reg = <0xd0012300 0x100>;
 				reg-shift = <2>;
 				interrupts = <44>;
+				reg-io-width = <4>;
 				status = "disabled";
 		};
 
@@ -93,14 +95,6 @@
 				status = "disabled";
 		};
 
-		ethernet@d0034000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0xd0034000 0x2500>;
-				interrupts = <14>;
-				clocks = <&gateclk 1>;
-				status = "disabled";
-		};
-
 		xor@d0060900 {
 			compatible = "marvell,orion-xor";
 			reg = <0xd0060900 0x100
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index f3f7e9d8adc..42eac1ff3cc 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -117,6 +117,7 @@
 		pinctrl: pinctrl@d0200 {
 			compatible = "marvell,dove-pinctrl";
 			reg = <0xd0200 0x10>;
+			clocks = <&gate_clk 22>;
 		};
 
 		spi0: spi@10600 {
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 46477ac1de9..139b40cc3a2 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -32,6 +32,7 @@
 
 		cpu@0 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <0>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -39,6 +40,7 @@
 
 		cpu@1 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <1>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -46,6 +48,7 @@
 
 		cpu@2 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
@@ -53,6 +56,7 @@
 
 		cpu@3 {
 			compatible = "arm,cortex-a15";
+			device_type = "cpu";
 			reg = <3>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 9b23a8255e3..f63490707f3 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -26,7 +26,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
 	};
 
 	sdhci@12530000 {
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2e3b6efaf1a..3acf594ea60 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -574,7 +574,7 @@
 
 	hdmi {
 		compatible = "samsung,exynos5-hdmi";
-		reg = <0x14530000 0x100000>;
+		reg = <0x14530000 0x70000>;
 		interrupts = <0 95 0>;
 	};
 
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index 921c83cf694..81e2c964a90 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -21,7 +21,7 @@
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
 	};
 
 	spi {
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index a9ae5d32e80..5927a8df562 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -30,33 +30,37 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu@900 {
 			compatible = "arm,cortex-a9";
-			reg = <0>;
+			device_type = "cpu";
+			reg = <0x900>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@1 {
+		cpu@901 {
 			compatible = "arm,cortex-a9";
-			reg = <1>;
+			device_type = "cpu";
+			reg = <0x901>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@2 {
+		cpu@902 {
 			compatible = "arm,cortex-a9";
-			reg = <2>;
+			device_type = "cpu";
+			reg = <0x902>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
 		};
 
-		cpu@3 {
+		cpu@903 {
 			compatible = "arm,cortex-a9";
-			reg = <3>;
+			device_type = "cpu";
+			reg = <0x903>;
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 7c43b8e70b9..e7484e4ea65 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -39,17 +39,17 @@
 				hog_pins_a: hog@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
 
-				led_pin_gpio0_17: led_gpio0_17@0 {
+				led_pin_gpio2_1: led_gpio2_1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
-						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -110,7 +110,7 @@
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_pin_gpio0_17>;
+		pinctrl-0 = <&led_pin_gpio2_1>;
 
 		user {
 			label = "green";
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
index 24731cb78e8..7f67402328d 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "Buglabs i.MX31 Bug 1.x";
-	compatible = "fsl,imx31-bug", "fsl,imx31";
+	compatible = "buglabs,imx31-bug", "fsl,imx31";
 
 	memory {
 		reg = <0x80000000 0x8000000>; /* 128M */
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 552aed4ff98..edc3f1eb669 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -492,7 +492,7 @@
 				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
-				clocks = <&clks 158>, <&clks 157>;
+				clocks = <&clks 87>, <&clks 86>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 9ae2004d567..4ccea2130a6 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -39,6 +39,7 @@
 			#size-cells = <0>;
 			interrupts = <32>;
 			clock-frequency = <100000>;
+			clocks = <&gate_clk 7>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index c0de5a7f660..cd15452a52a 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -82,4 +82,21 @@
 			gpios = <&gpio1 16 1>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 4 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 7735cee4a9c..110d6cbb795 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -144,6 +144,7 @@
 			compatible = "marvell,orion-ehci";
 			reg = <0x50000 0x1000>;
 			interrupts = <19>;
+			clocks = <&gate_clk 3>;
 			status = "okay";
 		};
 
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index a702fb345c0..b5bc96cb65a 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -33,9 +33,7 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_I2C=y
-CONFIG_I2C_MV64XXX=y
+CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_USB_SUPPORT is not set
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 91d5b6f1d5a..e103c290bc9 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -74,6 +74,8 @@ config SOC_EXYNOS5440
 	depends on ARCH_EXYNOS5
 	select ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
+	select PINCTRL
+	select PINCTRL_EXYNOS5440
 	help
 	  Enable EXYNOS5440 SoC support
 
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index d6d0dc65108..1a89824a5f7 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal)
 {
 	printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
 
+	/* EXYNOS5440 can support only common clock framework */
+
+	if (soc_is_exynos5440())
+		return;
+
+#ifdef CONFIG_SOC_EXYNOS5250
 	s3c24xx_register_baseclocks(xtal);
 	s5p_register_clocks(xtal);
 
 	exynos5_register_clocks();
 	exynos5_setup_clocks();
+#endif
 }
 
 #define COMBINER_ENABLE_SET	0x0
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index dc248167d20..981dc1e1da5 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = {
 
 static void highbank_power_off(void)
 {
-	hignbank_set_pwr_shutdown();
+	highbank_set_pwr_shutdown();
 
 	while (1)
 		cpu_do_idle();
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
index 7b60faccd55..f30c5284339 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu)
 {
 	flush_cache_all();
 
-	highbank_set_cpu_jump(cpu, secondary_startup);
+	highbank_set_cpu_jump(cpu, phys_to_virt(0));
 	highbank_set_core_pwr();
 
 	cpu_do_idle();
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index 1129957f6c1..4ecc864ac8b 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
 
 static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
+	highbank_set_cpu_jump(cpu, secondary_startup);
 	gic_raise_softirq(cpumask_of(cpu), 0);
 	return 0;
 }
@@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void)
 
 static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	if (scu_base_addr)
 		scu_enable(scu_base_addr);
-
-	/*
-	 * Write the address of secondary startup into the jump table
-	 * The cores are in wfi and wait until they receive a soft interrupt
-	 * and a non-zero value to jump to. Then the secondary CPU branches
-	 * to this address.
-	 */
-	for (i = 1; i < max_cpus; i++)
-		highbank_set_cpu_jump(i, secondary_startup);
 }
 
 struct smp_operations highbank_smp_ops __initdata = {
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 74aa135966f..04eddb4f438 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -14,10 +14,12 @@
  * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/cpu_pm.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/suspend.h>
 
+#include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
 #include <asm/suspend.h>
 
@@ -26,16 +28,31 @@
 
 static int highbank_suspend_finish(unsigned long val)
 {
+	outer_flush_all();
+	outer_disable();
+
+	highbank_set_pwr_suspend();
+
 	cpu_do_idle();
+
+	highbank_clear_pwr_request();
 	return 0;
 }
 
 static int highbank_pm_enter(suspend_state_t state)
 {
-	hignbank_set_pwr_suspend();
+	cpu_pm_enter();
+	cpu_cluster_pm_enter();
+
 	highbank_set_cpu_jump(0, cpu_resume);
 	cpu_suspend(0, highbank_suspend_finish);
 
+	cpu_cluster_pm_exit();
+	cpu_pm_exit();
+
+	highbank_smc1(0x102, 0x1);
+	if (scu_base_addr)
+		scu_enable(scu_base_addr);
 	return 0;
 }
 
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
index e13e8ea7c6c..70af9d13fce 100644
--- a/arch/arm/mach-highbank/sysregs.h
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void)
 		writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
 }
 
-static inline void hignbank_set_pwr_suspend(void)
+static inline void highbank_clear_core_pwr(void)
+{
+	int cpu = cpu_logical_map(smp_processor_id());
+	if (scu_base_addr)
+		scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
+	else
+		writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu));
+}
+
+static inline void highbank_set_pwr_suspend(void)
 {
 	writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_shutdown(void)
+static inline void highbank_set_pwr_shutdown(void)
 {
 	writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_soft_reset(void)
+static inline void highbank_set_pwr_soft_reset(void)
 {
 	writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
-static inline void hignbank_set_pwr_hard_reset(void)
+static inline void highbank_set_pwr_hard_reset(void)
 {
 	writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
 	highbank_set_core_pwr();
 }
 
+static inline void highbank_clear_pwr_request(void)
+{
+	writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ);
+	highbank_clear_core_pwr();
+}
+
 #endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index aed96ad9bd4..37d8384dcf1 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -22,9 +22,9 @@
 void highbank_restart(char mode, const char *cmd)
 {
 	if (mode == 'h')
-		hignbank_set_pwr_hard_reset();
+		highbank_set_pwr_hard_reset();
 	else
-		hignbank_set_pwr_soft_reset();
+		highbank_set_pwr_soft_reset();
 
 	while (1)
 		cpu_do_idle();
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index ff4150a2ad0..de4fd2bb1e2 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void)
 	orion_clkdev_add(NULL, "mv643xx_eth_port.1",
 			 of_clk_get_from_provider(&clkspec));
 
+	clkspec.args[0] = CGC_BIT_SDIO;
+	orion_clkdev_add(NULL, "mvsdio",
+			 of_clk_get_from_provider(&clkspec));
+
 }
 
 static void __init kirkwood_of_clk_init(void)
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index 15e69fcde9f..23d2dd1b1b1 100644
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = {
 	0
 };
 
-#define TOPKICK_SATA0_PWR_ENABLE 36
-
 void __init usi_topkick_init(void)
 {
 	/*
@@ -73,8 +71,6 @@ void __init usi_topkick_init(void)
 	 */
 	kirkwood_mpp_conf(topkick_mpp_config);
 
-	/* SATA0 power enable */
-	gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
 
 	kirkwood_ge00_init(&topkick_ge00_data);
 	kirkwood_sdio_init(&topkick_mvsdio_data);
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 98167a4319f..9f19069248d 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,7 +27,6 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index b549d057154..215f8cdb400 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -22,49 +22,49 @@
 
 #include <mach/hardware.h>
 
-#define IRQ_VIC_START		1	/* first VIC interrupt is 1 */
+#define IRQ_VIC_START		32	/* first VIC interrupt is 1 */
 
 /*
  * Interrupt numbers generic for all Nomadik Chip cuts
  */
-#define IRQ_WATCHDOG			1
-#define IRQ_SOFTINT			2
-#define IRQ_CRYPTO			3
-#define IRQ_OWM				4
-#define IRQ_MTU0			5
-#define IRQ_MTU1			6
-#define IRQ_GPIO0			7
-#define IRQ_GPIO1			8
-#define IRQ_GPIO2			9
-#define IRQ_GPIO3			10
-#define IRQ_RTC_RTT			11
-#define IRQ_SSP				12
-#define IRQ_UART0			13
-#define IRQ_DMA1			14
-#define IRQ_CLCD_MDIF			15
-#define IRQ_DMA0			16
-#define IRQ_PWRFAIL			17
-#define IRQ_UART1			18
-#define IRQ_FIRDA			19
-#define IRQ_MSP0			20
-#define IRQ_I2C0			21
-#define IRQ_I2C1			22
-#define IRQ_SDMMC			23
-#define IRQ_USBOTG			24
-#define IRQ_SVA_IT0			25
-#define IRQ_SVA_IT1			26
-#define IRQ_SAA_IT0			27
-#define IRQ_SAA_IT1			28
-#define IRQ_UART2			29
-#define IRQ_MSP2			30
-#define IRQ_L2CC			49
-#define IRQ_HPI				50
-#define IRQ_SKE				51
-#define IRQ_KP				52
-#define IRQ_MEMST			55
-#define IRQ_SGA_IT			59
-#define IRQ_USBM			61
-#define IRQ_MSP1			63
+#define IRQ_WATCHDOG			(IRQ_VIC_START+0)
+#define IRQ_SOFTINT			(IRQ_VIC_START+1)
+#define IRQ_CRYPTO			(IRQ_VIC_START+2)
+#define IRQ_OWM				(IRQ_VIC_START+3)
+#define IRQ_MTU0			(IRQ_VIC_START+4)
+#define IRQ_MTU1			(IRQ_VIC_START+5)
+#define IRQ_GPIO0			(IRQ_VIC_START+6)
+#define IRQ_GPIO1			(IRQ_VIC_START+7)
+#define IRQ_GPIO2			(IRQ_VIC_START+8)
+#define IRQ_GPIO3			(IRQ_VIC_START+9)
+#define IRQ_RTC_RTT			(IRQ_VIC_START+10)
+#define IRQ_SSP				(IRQ_VIC_START+11)
+#define IRQ_UART0			(IRQ_VIC_START+12)
+#define IRQ_DMA1			(IRQ_VIC_START+13)
+#define IRQ_CLCD_MDIF			(IRQ_VIC_START+14)
+#define IRQ_DMA0			(IRQ_VIC_START+15)
+#define IRQ_PWRFAIL			(IRQ_VIC_START+16)
+#define IRQ_UART1			(IRQ_VIC_START+17)
+#define IRQ_FIRDA			(IRQ_VIC_START+18)
+#define IRQ_MSP0			(IRQ_VIC_START+19)
+#define IRQ_I2C0			(IRQ_VIC_START+20)
+#define IRQ_I2C1			(IRQ_VIC_START+21)
+#define IRQ_SDMMC			(IRQ_VIC_START+22)
+#define IRQ_USBOTG			(IRQ_VIC_START+23)
+#define IRQ_SVA_IT0			(IRQ_VIC_START+24)
+#define IRQ_SVA_IT1			(IRQ_VIC_START+25)
+#define IRQ_SAA_IT0			(IRQ_VIC_START+26)
+#define IRQ_SAA_IT1			(IRQ_VIC_START+27)
+#define IRQ_UART2			(IRQ_VIC_START+28)
+#define IRQ_MSP2			(IRQ_VIC_START+29)
+#define IRQ_L2CC			(IRQ_VIC_START+30)
+#define IRQ_HPI				(IRQ_VIC_START+31)
+#define IRQ_SKE				(IRQ_VIC_START+32)
+#define IRQ_KP				(IRQ_VIC_START+33)
+#define IRQ_MEMST			(IRQ_VIC_START+34)
+#define IRQ_SGA_IT			(IRQ_VIC_START+35)
+#define IRQ_USBM			(IRQ_VIC_START+36)
+#define IRQ_MSP1			(IRQ_VIC_START+37)
 
 #define NOMADIK_GPIO_OFFSET		(IRQ_VIC_START+64)
 
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index a8fce3ccc70..2e98a3ac7c5 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -160,7 +160,7 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
 
-static struct omap_usb_config ams_delta_usb_config = {
+static struct omap_usb_config ams_delta_usb_config __initdata = {
 	.register_host	= 1,
 	.hmc_mode	= 16,
 	.pins[0]	= 2,
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 104fed366b8..1a1db5971cd 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -629,8 +629,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 #endif
 
-void __init omap1_usb_init(struct omap_usb_config *pdata)
+void __init omap1_usb_init(struct omap_usb_config *_pdata)
 {
+	struct omap_usb_config *pdata;
+
+	pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return;
+
 	pdata->usb0_init = omap1_usb0_init;
 	pdata->usb1_init = omap1_usb1_init;
 	pdata->usb2_init = omap1_usb2_init;
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index bdf39481fbd..6ef87580c33 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -1167,6 +1167,8 @@ static const struct clk_ops emu_src_ck_ops = {
 	.recalc_rate	= &omap2_clksel_recalc,
 	.get_parent	= &omap2_clksel_find_parent_index,
 	.set_parent	= &omap2_clksel_set_parent,
+	.enable		= &omap2_clkops_enable_clkdm,
+	.disable	= &omap2_clkops_disable_clkdm,
 };
 
 static struct clk emu_src_ck;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 081c71edddf..646c14d9fdb 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -2070,7 +2070,7 @@ static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = {
 	{ .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, },
 	{ .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, },
 	{ .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, },
-	{ .irq = -1 + OMAP_INTC_START, },
+	{ .irq = -1, },
 };
 
 static struct omap_hwmod am33xx_usbss_hwmod = {
@@ -2515,7 +2515,7 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
 	.user		= OCP_USER_MPU,
 };
 
-struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
+static struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
 	{
 		.pa_start	= 0x4A101000,
 		.pa_end		= 0x4A101000 + SZ_256 - 1,
@@ -2523,7 +2523,7 @@ struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
 	{ }
 };
 
-struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
+static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
 	.master		= &am33xx_cpgmac0_hwmod,
 	.slave		= &am33xx_mdio_hwmod,
 	.addr		= am33xx_mdio_addr_space,
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index cc0e71430af..418de9c3b31 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -28,6 +28,14 @@
 #include "prm-regbits-24xx.h"
 
 /*
+ * OMAP24xx PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED bits -
+ * these are reversed from the bits used on OMAP3+
+ */
+#define OMAP24XX_PWRDM_POWER_ON			0x0
+#define OMAP24XX_PWRDM_POWER_RET		0x1
+#define OMAP24XX_PWRDM_POWER_OFF		0x3
+
+/*
  * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
  *   hardware register (which are specific to the OMAP2xxx SoCs) to
  *   reset source ID bit shifts (which is an OMAP SoC-independent
@@ -68,6 +76,34 @@ static u32 omap2xxx_prm_read_reset_sources(void)
 }
 
 /**
+ * omap2xxx_pwrst_to_common_pwrst - convert OMAP2xxx pwrst to common pwrst
+ * @omap2xxx_pwrst: OMAP2xxx hardware power state to convert
+ *
+ * Return the common power state bits corresponding to the OMAP2xxx
+ * hardware power state bits @omap2xxx_pwrst, or -EINVAL upon error.
+ */
+static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst)
+{
+	u8 pwrst;
+
+	switch (omap2xxx_pwrst) {
+	case OMAP24XX_PWRDM_POWER_OFF:
+		pwrst = PWRDM_POWER_OFF;
+		break;
+	case OMAP24XX_PWRDM_POWER_RET:
+		pwrst = PWRDM_POWER_RET;
+		break;
+	case OMAP24XX_PWRDM_POWER_ON:
+		pwrst = PWRDM_POWER_ON;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return pwrst;
+}
+
+/**
  * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
  *
  * Set the DPLL reset bit, which should reboot the SoC.  This is the
@@ -97,10 +133,56 @@ int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
 	return 0;
 }
 
+static int omap2xxx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	u8 omap24xx_pwrst;
+
+	switch (pwrst) {
+	case PWRDM_POWER_OFF:
+		omap24xx_pwrst = OMAP24XX_PWRDM_POWER_OFF;
+		break;
+	case PWRDM_POWER_RET:
+		omap24xx_pwrst = OMAP24XX_PWRDM_POWER_RET;
+		break;
+	case PWRDM_POWER_ON:
+		omap24xx_pwrst = OMAP24XX_PWRDM_POWER_ON;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+				   (omap24xx_pwrst << OMAP_POWERSTATE_SHIFT),
+				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+	return 0;
+}
+
+static int omap2xxx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	u8 omap2xxx_pwrst;
+
+	omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+						       OMAP2_PM_PWSTCTRL,
+						       OMAP_POWERSTATE_MASK);
+
+	return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
+}
+
+static int omap2xxx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	u8 omap2xxx_pwrst;
+
+	omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+						       OMAP2_PM_PWSTST,
+						       OMAP_POWERSTATEST_MASK);
+
+	return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
+}
+
 struct pwrdm_ops omap2_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
+	.pwrdm_set_next_pwrst	= omap2xxx_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap2xxx_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap2xxx_pwrdm_read_pwrst,
 	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
 	.pwrdm_set_mem_onst	= omap2_pwrdm_set_mem_onst,
 	.pwrdm_set_mem_retst	= omap2_pwrdm_set_mem_retst,
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 30517f5af70..a3e121f94a8 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -103,28 +103,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
 /* Powerdomain low-level functions */
 
 /* Common functions across OMAP2 and OMAP3 */
-int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
-				   (pwrst << OMAP_POWERSTATE_SHIFT),
-				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-	return 0;
-}
-
-int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTCTRL,
-					     OMAP_POWERSTATE_MASK);
-}
-
-int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-					     OMAP2_PM_PWSTST,
-					     OMAP_POWERSTATEST_MASK);
-}
-
 int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
 								u8 pwrst)
 {
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index 39822aabcff..e648bd55b07 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -277,6 +277,28 @@ static u32 omap3xxx_prm_read_reset_sources(void)
 
 /* Powerdomain low-level functions */
 
+static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+	omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+				   (pwrst << OMAP_POWERSTATE_SHIFT),
+				   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+	return 0;
+}
+
+static int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTCTRL,
+					     OMAP_POWERSTATE_MASK);
+}
+
+static int omap3_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+	return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+					     OMAP2_PM_PWSTST,
+					     OMAP_POWERSTATEST_MASK);
+}
+
 /* Applicable only for OMAP3. Not supported on OMAP2 */
 static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
 {
@@ -355,9 +377,9 @@ static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
 }
 
 struct pwrdm_ops omap3_pwrdm_operations = {
-	.pwrdm_set_next_pwrst	= omap2_pwrdm_set_next_pwrst,
-	.pwrdm_read_next_pwrst	= omap2_pwrdm_read_next_pwrst,
-	.pwrdm_read_pwrst	= omap2_pwrdm_read_pwrst,
+	.pwrdm_set_next_pwrst	= omap3_pwrdm_set_next_pwrst,
+	.pwrdm_read_next_pwrst	= omap3_pwrdm_read_next_pwrst,
+	.pwrdm_read_pwrst	= omap3_pwrdm_read_pwrst,
 	.pwrdm_read_prev_pwrst	= omap3_pwrdm_read_prev_pwrst,
 	.pwrdm_set_logic_retst	= omap2_pwrdm_set_logic_retst,
 	.pwrdm_read_logic_pwrst	= omap3_pwrdm_read_logic_pwrst,
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 7498bc77fe8..c05a343d465 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -56,9 +56,9 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
  *   enumeration)
  */
 static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
-	{ OMAP4430_RST_GLOBAL_WARM_SW_SHIFT,
+	{ OMAP4430_GLOBAL_WARM_SW_RST_SHIFT,
 	  OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
-	{ OMAP4430_RST_GLOBAL_COLD_SW_SHIFT,
+	{ OMAP4430_GLOBAL_COLD_RST_SHIFT,
 	  OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
 	{ OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT,
 	  OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
@@ -333,7 +333,7 @@ static u32 omap44xx_prm_read_reset_sources(void)
 	u32 r = 0;
 	u32 v;
 
-	v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+	v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
 				    OMAP4_RM_RSTST);
 
 	p = omap44xx_prm_reset_src_map;
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 22b0979206c..8ee1fbdec56 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -62,8 +62,8 @@
 
 /* OMAP4 specific register offsets */
 #define OMAP4_RM_RSTCTRL				0x0000
-#define OMAP4_RM_RSTTIME				0x0004
-#define OMAP4_RM_RSTST					0x0008
+#define OMAP4_RM_RSTST					0x0004
+#define OMAP4_RM_RSTTIME				0x0008
 #define OMAP4_PM_PWSTCTRL				0x0000
 #define OMAP4_PM_PWSTST					0x0004
 
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index f3771cdb983..5b0b86bb34b 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,6 +22,8 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
 
+#include <plat/counter-32k.h>
+
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
 #define OMAP2_32KSYNCNT_REV_OFF		0x0
 #define OMAP2_32KSYNCNT_REV_SCHEME	(0x3 << 30)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 743fc2836f7..a5bc92d7e47 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -26,6 +26,8 @@
 
 #include <asm/mach/map.h>
 
+#include <plat/sram.h>
+
 #define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
 
 static void __iomem *omap_sram_base;
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index e0072ce8d6e..b69e11dc679 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -43,7 +43,7 @@ extern unsigned long samsung_cpu_id;
 #define EXYNOS4_CPU_MASK	0xFFFE0000
 
 #define EXYNOS5250_SOC_ID	0x43520000
-#define EXYNOS5440_SOC_ID	0x54400000
+#define EXYNOS5440_SOC_ID	0xE5440000
 #define EXYNOS5_SOC_MASK	0xFFFFF000
 
 #define IS_SAMSUNG_CPU(name, id, mask)		\
diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c
index c6d3c263b07..8fa5408b6c7 100644
--- a/drivers/clk/mvebu/clk-gating-ctrl.c
+++ b/drivers/clk/mvebu/clk-gating-ctrl.c
@@ -32,7 +32,7 @@ struct mvebu_soc_descr {
 
 #define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
 
-static struct clk __init *mvebu_clk_gating_get_src(
+static struct clk *mvebu_clk_gating_get_src(
 	struct of_phandle_args *clkspec, void *data)
 {
 	struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data;
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index ac71f555dd7..e17fad03cb8 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1361,13 +1361,16 @@ static int mv_xor_probe(struct platform_device *pdev)
 err_channel_add:
 	for (i = 0; i < MV_XOR_MAX_CHANNELS; i++)
 		if (xordev->channels[i]) {
+			mv_xor_channel_remove(xordev->channels[i]);
 			if (pdev->dev.of_node)
 				irq_dispose_mapping(xordev->channels[i]->irq);
-			mv_xor_channel_remove(xordev->channels[i]);
 		}
 
-	clk_disable_unprepare(xordev->clk);
-	clk_put(xordev->clk);
+	if (!IS_ERR(xordev->clk)) {
+		clk_disable_unprepare(xordev->clk);
+		clk_put(xordev->clk);
+	}
+
 	return ret;
 }
 
diff --git a/drivers/pinctrl/mvebu/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c
index 750dea78f53..69aba369728 100644
--- a/drivers/pinctrl/mvebu/pinctrl-dove.c
+++ b/drivers/pinctrl/mvebu/pinctrl-dove.c
@@ -595,8 +595,11 @@ static int dove_pinctrl_probe(struct platform_device *pdev)
 	 * grab clk to make sure it is ticking.
 	 */
 	clk = devm_clk_get(&pdev->dev, NULL);
-	if (!IS_ERR(clk))
-		clk_prepare_enable(clk);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "Unable to get pdma clock");
+		return PTR_RET(clk);
+	}
+	clk_prepare_enable(clk);
 
 	return mvebu_pinctrl_probe(pdev);
 }
diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
index 06074248ba7..e290d48ddd9 100644
--- a/drivers/power/reset/gpio-poweroff.c
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -29,15 +29,16 @@ static int gpio_active_low;
 
 static void gpio_poweroff_do_poweroff(void)
 {
-	BUG_ON(gpio_num == -1);
+	BUG_ON(!gpio_is_valid(gpio_num));
 
-	/* drive it active */
+	/* drive it active, also inactive->active edge */
 	gpio_direction_output(gpio_num, !gpio_active_low);
 	mdelay(100);
-	/* rising edge or drive inactive */
+	/* drive inactive, also active->inactive edge */
 	gpio_set_value(gpio_num, gpio_active_low);
 	mdelay(100);
-	/* falling edge */
+
+	/* drive it active, also inactive->active edge */
 	gpio_set_value(gpio_num, !gpio_active_low);
 
 	/* give it some time */
@@ -60,15 +61,12 @@ static int gpio_poweroff_probe(struct platform_device *pdev)
 	}
 
 	gpio_num = of_get_gpio_flags(pdev->dev.of_node, 0, &flags);
-	if (gpio_num < 0) {
-		pr_err("%s: Could not get GPIO configuration: %d",
-		       __func__, gpio_num);
-		return -ENODEV;
-	}
+	if (!gpio_is_valid(gpio_num))
+		return gpio_num;
+
 	gpio_active_low = flags & OF_GPIO_ACTIVE_LOW;
 
-	if (of_get_property(pdev->dev.of_node, "input", NULL))
-		input = true;
+	input = of_property_read_bool(pdev->dev.of_node, "input");
 
 	ret = gpio_request(gpio_num, "poweroff-gpio");
 	if (ret) {
@@ -98,8 +96,7 @@ err:
 
 static int gpio_poweroff_remove(struct platform_device *pdev)
 {
-	if (gpio_num != -1)
-		gpio_free(gpio_num);
+	gpio_free(gpio_num);
 	if (pm_power_off == &gpio_poweroff_do_poweroff)
 		pm_power_off = NULL;
 
@@ -115,15 +112,15 @@ static struct platform_driver gpio_poweroff_driver = {
 	.probe = gpio_poweroff_probe,
 	.remove = gpio_poweroff_remove,
 	.driver = {
-		   .name = "poweroff-gpio",
-		   .owner = THIS_MODULE,
-		   .of_match_table = of_gpio_poweroff_match,
-		   },
+		.name = "poweroff-gpio",
+		.owner = THIS_MODULE,
+		.of_match_table = of_gpio_poweroff_match,
+	},
 };
 
 module_platform_driver(gpio_poweroff_driver);
 
 MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>");
 MODULE_DESCRIPTION("GPIO poweroff driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:poweroff-gpio");
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index a45b37c2e88..755556ca5b2 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -369,7 +369,8 @@ static void mxsfb_disable_controller(struct fb_info *fb_info)
 		loop--;
 	}
 
-	writel(VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4 + REG_CLR);
+	reg = readl(host->base + LCDC_VDCTRL4);
+	writel(reg & ~VDCTRL4_SYNC_SIGNALS_ON, host->base + LCDC_VDCTRL4);
 
 	clk_disable_unprepare(host->clk);