USB: OHCI: remove PNX8550 OHCI driver

The users have been converted to use the platform OHCI driver instead, thus
making the ohci-pnx8550 driver obsolete, so remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2 files changed, 0 insertions, 248 deletions

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index bac66263696..b8f2ead7e5c 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1135,11 +1135,6 @@ MODULE_LICENSE ("GPL");
 #define PLATFORM_DRIVER		ohci_hcd_au1xxx_driver
 #endif
 
-#ifdef CONFIG_PNX8550
-#include "ohci-pnx8550.c"
-#define PLATFORM_DRIVER		ohci_hcd_pnx8550_driver
-#endif
-
 #ifdef CONFIG_ARCH_AT91
 #include "ohci-at91.c"
 #define PLATFORM_DRIVER		ohci_hcd_at91_driver
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
deleted file mode 100644
index 148d27d6a67..00000000000
--- a/drivers/usb/host/ohci-pnx8550.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * (C) Copyright 2002 Hewlett-Packard Company
- * (C) Copyright 2005 Embedded Alley Solutions, Inc.
- *
- * Bus Glue for PNX8550
- *
- * Written by Christopher Hoover <ch@hpl.hp.com>
- * Based on fragments of previous driver by Russell King et al.
- *
- * Modified for LH7A404 from ohci-sa1111.c
- *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *
- * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c
- *  by Vitaly Wool <vitalywool@gmail.com>
- *
- * This file is licenced under the GPL.
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <asm/mach-pnx8550/usb.h>
-#include <asm/mach-pnx8550/int.h>
-#include <asm/mach-pnx8550/pci.h>
-
-#ifndef CONFIG_PNX8550
-#error "This file is PNX8550 bus glue.  CONFIG_PNX8550 must be defined."
-#endif
-
-extern int usb_disabled(void);
-
-/*-------------------------------------------------------------------------*/
-
-static void pnx8550_start_hc(struct platform_device *dev)
-{
-	/*
-	 * Set register CLK48CTL to enable and 48MHz
-	 */
-	outl(0x00000003, PCI_BASE | 0x0004770c);
-
-	/*
-	 * Set register CLK12CTL to enable and 48MHz
-	 */
-	outl(0x00000003, PCI_BASE | 0x00047710);
-
-	udelay(100);
-}
-
-static void pnx8550_stop_hc(struct platform_device *dev)
-{
-	udelay(10);
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* configure so an HC device and id are always provided */
-/* always called with process context; sleeping is OK */
-
-
-/**
- * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs
- * Context: !in_interrupt()
- *
- * Allocates basic resources for this USB host controller, and
- * then invokes the start() method for the HCD associated with it
- * through the hotplug entry's driver_data.
- *
- */
-int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
-			  struct platform_device *dev)
-{
-	int retval;
-	struct usb_hcd *hcd;
-
-	if (dev->resource[0].flags != IORESOURCE_MEM ||
-			dev->resource[1].flags != IORESOURCE_IRQ) {
-		dev_err (&dev->dev,"invalid resource type\n");
-		return -ENOMEM;
-	}
-
-	hcd = usb_create_hcd (driver, &dev->dev, "pnx8550");
-	if (!hcd)
-		return -ENOMEM;
-	hcd->rsrc_start = dev->resource[0].start;
-	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
-
-	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-		dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] "
-				"failed\n", hcd->rsrc_start, hcd->rsrc_len);
-		retval = -EBUSY;
-		goto err1;
-	}
-
-	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-	if (!hcd->regs) {
-		dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n",
-				hcd->rsrc_start, hcd->rsrc_len);
-		retval = -ENOMEM;
-		goto err2;
-	}
-
-	pnx8550_start_hc(dev);
-
-	ohci_hcd_init(hcd_to_ohci(hcd));
-
-	retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
-	if (retval == 0)
-		return retval;
-
-	pnx8550_stop_hc(dev);
-	iounmap(hcd->regs);
- err2:
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- err1:
-	usb_put_hcd(hcd);
-	return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-/**
- * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs
- * @dev: USB Host Controller being removed
- * Context: !in_interrupt()
- *
- * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking
- * the HCD's stop() method.  It is always called from a thread
- * context, normally "rmmod", "apmd", or something similar.
- *
- */
-void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev)
-{
-	usb_remove_hcd(hcd);
-	pnx8550_stop_hc(dev);
-	iounmap(hcd->regs);
-	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-	usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int __devinit
-ohci_pnx8550_start (struct usb_hcd *hcd)
-{
-	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
-	int		ret;
-
-	ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci);
-
-	if ((ret = ohci_init(ohci)) < 0)
-		return ret;
-
-	if ((ret = ohci_run (ohci)) < 0) {
-		dev_err(hcd->self.controller, "can't start %s",
-			hcd->self.bus_name);
-		ohci_stop (hcd);
-		return ret;
-	}
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver ohci_pnx8550_hc_driver = {
-	.description =		hcd_name,
-	.product_desc =		"PNX8550 OHCI",
-	.hcd_priv_size =	sizeof(struct ohci_hcd),
-
-	/*
-	 * generic hardware linkage
-	 */
-	.irq =			ohci_irq,
-	.flags =		HCD_USB11 | HCD_MEMORY,
-
-	/*
-	 * basic lifecycle operations
-	 */
-	.start =		ohci_pnx8550_start,
-	.stop =			ohci_stop,
-
-	/*
-	 * managing i/o requests and associated device resources
-	 */
-	.urb_enqueue =		ohci_urb_enqueue,
-	.urb_dequeue =		ohci_urb_dequeue,
-	.endpoint_disable =	ohci_endpoint_disable,
-
-	/*
-	 * scheduling support
-	 */
-	.get_frame_number =	ohci_get_frame,
-
-	/*
-	 * root hub support
-	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
-#ifdef	CONFIG_PM
-	.bus_suspend =		ohci_bus_suspend,
-	.bus_resume =		ohci_bus_resume,
-#endif
-	.start_port_reset =	ohci_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev)
-{
-	int ret;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev);
-	return ret;
-}
-
-static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-	usb_hcd_pnx8550_remove(hcd, pdev);
-	return 0;
-}
-
-MODULE_ALIAS("platform:pnx8550-ohci");
-
-static struct platform_driver ohci_hcd_pnx8550_driver = {
-	.driver = {
-		.name	= "pnx8550-ohci",
-		.owner	= THIS_MODULE,
-	},
-	.probe		= ohci_hcd_pnx8550_drv_probe,
-	.remove		= ohci_hcd_pnx8550_drv_remove,
-};
-