Merge branch 'x86/mpparse' into x86/devel

Conflicts:

	arch/x86/Kconfig
	arch/x86/kernel/io_apic_32.c
	arch/x86/kernel/setup_64.c
	arch/x86/mm/init_32.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

90 files changed, 3874 insertions, 2968 deletions

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 7b44e492cf6..da13d6d1b2b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -610,6 +610,29 @@ and is between 256 and 4096 characters. It is defined in the file
 			See drivers/char/README.epca and
 			Documentation/digiepca.txt.
 
+	disable_mtrr_cleanup [X86]
+	enable_mtrr_cleanup [X86]
+			The kernel tries to adjust MTRR layout from continuous
+			to discrete, to make X server driver able to add WB
+			entry later. This parameter enables/disables that.
+
+	mtrr_chunk_size=nn[KMG] [X86]
+			used for mtrr cleanup. It is largest continous chunk
+			that could hold holes aka. UC entries.
+
+	mtrr_gran_size=nn[KMG] [X86]
+			Used for mtrr cleanup. It is granularity of mtrr block.
+			Default is 1.
+			Large value could prevent small alignment from
+			using up MTRRs.
+
+	mtrr_spare_reg_nr=n [X86]
+			Format: <integer>
+			Range: 0,7 : spare reg number
+			Default : 1
+			Used for mtrr cleanup. It is spare mtrr entries number.
+			Set to 2 or more if your graphical card needs more.
+
 	disable_mtrr_trim [X86, Intel and AMD only]
 			By default the kernel will trim any uncacheable
 			memory out of your available memory pool based on
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 7dc46ba26fb..640dc62a7fa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -230,6 +230,27 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+config X86_FIND_SMP_CONFIG
+	def_bool y
+	depends on X86_MPPARSE || X86_VOYAGER || X86_VISWS
+	depends on X86_32
+
+if ACPI
+config X86_MPPARSE
+	def_bool y
+	bool "Enable MPS table"
+	depends on X86_LOCAL_APIC && !X86_VISWS
+	help
+	  For old smp systems that do not have proper acpi support. Newer systems
+	  (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
+endif
+
+if !ACPI
+config X86_MPPARSE
+	def_bool y
+	depends on X86_LOCAL_APIC && !X86_VISWS
+endif
+
 choice
 	prompt "Subarchitecture Type"
 	default X86_PC
@@ -261,36 +282,6 @@ config X86_VOYAGER
 	  If you do not specifically know you have a Voyager based machine,
 	  say N here, otherwise the kernel you build will not be bootable.
 
-config X86_NUMAQ
-	bool "NUMAQ (IBM/Sequent)"
-	depends on SMP && X86_32 && PCI
-	select NUMA
-	help
-	  This option is used for getting Linux to run on a (IBM/Sequent) NUMA
-	  multiquad box. This changes the way that processors are bootstrapped,
-	  and uses Clustered Logical APIC addressing mode instead of Flat Logical.
-	  You will need a new lynxer.elf file to flash your firmware with - send
-	  email to <Martin.Bligh@us.ibm.com>.
-
-config X86_SUMMIT
-	bool "Summit/EXA (IBM x440)"
-	depends on X86_32 && SMP
-	help
-	  This option is needed for IBM systems that use the Summit/EXA chipset.
-	  In particular, it is needed for the x440.
-
-	  If you don't have one of these computers, you should say N here.
-	  If you want to build a NUMA kernel, you must select ACPI.
-
-config X86_BIGSMP
-	bool "Support for other sub-arch SMP systems with more than 8 CPUs"
-	depends on X86_32 && SMP
-	help
-	  This option is needed for the systems that have more than 8 CPUs
-	  and if the system is not of any sub-arch type above.
-
-	  If you don't have such a system, you should say N here.
-
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
 	depends on X86_32 && !PCI
@@ -304,12 +295,33 @@ config X86_VISWS
 	  and vice versa. See <file:Documentation/sgi-visws.txt> for details.
 
 config X86_GENERICARCH
-       bool "Generic architecture (Summit, bigsmp, ES7000, default)"
+       bool "Generic architecture"
 	depends on X86_32
        help
-          This option compiles in the Summit, bigsmp, ES7000, default subarchitectures.
-	  It is intended for a generic binary kernel.
-	  If you want a NUMA kernel, select ACPI.   We need SRAT for NUMA.
+          This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
+	  subarchitectures.  It is intended for a generic binary kernel.
+	  if you select them all, kernel will probe it one by one. and will
+	  fallback to default.
+
+if X86_GENERICARCH
+
+config X86_NUMAQ
+	bool "NUMAQ (IBM/Sequent)"
+	depends on SMP && X86_32 && PCI && X86_MPPARSE
+	select NUMA
+	help
+	  This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
+	  NUMA multiquad box. This changes the way that processors are
+	  bootstrapped, and uses Clustered Logical APIC addressing mode instead
+	  of Flat Logical.  You will need a new lynxer.elf file to flash your
+	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
+
+config X86_SUMMIT
+	bool "Summit/EXA (IBM x440)"
+	depends on X86_32 && SMP
+	help
+	  This option is needed for IBM systems that use the Summit/EXA chipset.
+	  In particular, it is needed for the x440.
 
 config X86_ES7000
 	bool "Support for Unisys ES7000 IA32 series"
@@ -317,8 +329,15 @@ config X86_ES7000
 	help
 	  Support for Unisys ES7000 systems.  Say 'Y' here if this kernel is
 	  supposed to run on an IA32-based Unisys ES7000 system.
-	  Only choose this option if you have such a system, otherwise you
-	  should say N here.
+
+config X86_BIGSMP
+	bool "Support for big SMP systems with more than 8 CPUs"
+	depends on X86_32 && SMP
+	help
+	  This option is needed for the systems that have more than 8 CPUs
+	  and if the system is not of any sub-arch type above.
+
+endif
 
 config X86_RDC321X
 	bool "RDC R-321x SoC"
@@ -432,7 +451,7 @@ config MEMTEST
 
 config ACPI_SRAT
 	def_bool y
-	depends on X86_32 && ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+	depends on X86_32 && ACPI && NUMA && X86_GENERICARCH
 	select ACPI_NUMA
 
 config HAVE_ARCH_PARSE_SRAT
@@ -441,11 +460,11 @@ config HAVE_ARCH_PARSE_SRAT
 
 config X86_SUMMIT_NUMA
 	def_bool y
-	depends on X86_32 && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+	depends on X86_32 && NUMA && X86_GENERICARCH
 
 config X86_CYCLONE_TIMER
 	def_bool y
-	depends on X86_32 && X86_SUMMIT || X86_GENERICARCH
+	depends on X86_GENERICARCH
 
 config ES7000_CLUSTERED_APIC
 	def_bool y
@@ -910,9 +929,9 @@ config X86_PAE
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
 	depends on SMP
-	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT || X86_GENERICARCH) && ACPI) && EXPERIMENTAL)
+	depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
 	default n if X86_PC
-	default y if (X86_NUMAQ || X86_SUMMIT)
+	default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
 	help
 	  Enable NUMA (Non Uniform Memory Access) support.
 	  The kernel will try to allocate memory used by a CPU on the
@@ -1089,6 +1108,40 @@ config MTRR
 
 	  See <file:Documentation/mtrr.txt> for more information.
 
+config MTRR_SANITIZER
+	def_bool y
+	prompt "MTRR cleanup support"
+	depends on MTRR
+	help
+	  Convert MTRR layout from continuous to discrete, so some X driver
+	  could add WB entries.
+
+	  Say N here if you see bootup problems (boot crash, boot hang,
+	  spontaneous reboots).
+
+	  Could be disabled with disable_mtrr_cleanup. Also mtrr_chunk_size
+	  could be used to send largest mtrr entry size for continuous block
+	  to hold holes (aka. UC entries)
+
+	  If unsure, say Y.
+
+config MTRR_SANITIZER_ENABLE_DEFAULT
+	int "MTRR cleanup enable value (0-1)"
+	range 0 1
+	default "0"
+	depends on MTRR_SANITIZER
+	help
+	  Enable mtrr cleanup default value
+
+config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
+	int "MTRR cleanup spare reg num (0-7)"
+	range 0 7
+	default "1"
+	depends on MTRR_SANITIZER
+	help
+	  mtrr cleanup spare entries default, it can be changed via
+	  mtrr_spare_reg_nr=
+
 config X86_PAT
 	bool
 	prompt "x86 PAT support"
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 38a15333f72..f0684bb74fa 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -137,15 +137,6 @@ config 4KSTACKS
 	  on the VM subsystem for higher order allocations. This option
 	  will also use IRQ stacks to compensate for the reduced stackspace.
 
-config X86_FIND_SMP_CONFIG
-	def_bool y
-	depends on X86_LOCAL_APIC || X86_VOYAGER
-	depends on X86_32
-
-config X86_MPPARSE
-	def_bool y
-	depends on (X86_32 && (X86_LOCAL_APIC && !X86_VISWS)) || X86_64
-
 config DOUBLEFAULT
 	default y
 	bool "Enable doublefault exception handler" if EMBEDDED
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 5df0d1e330b..b03d24b44bf 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -117,29 +117,11 @@ mcore-$(CONFIG_X86_VOYAGER)	:= arch/x86/mach-voyager/
 mflags-$(CONFIG_X86_VISWS)	:= -Iinclude/asm-x86/mach-visws
 mcore-$(CONFIG_X86_VISWS)	:= arch/x86/mach-visws/
 
-# NUMAQ subarch support
-mflags-$(CONFIG_X86_NUMAQ)	:= -Iinclude/asm-x86/mach-numaq
-mcore-$(CONFIG_X86_NUMAQ)	:= arch/x86/mach-default/
-
-# BIGSMP subarch support
-mflags-$(CONFIG_X86_BIGSMP)	:= -Iinclude/asm-x86/mach-bigsmp
-mcore-$(CONFIG_X86_BIGSMP)	:= arch/x86/mach-default/
-
-#Summit subarch support
-mflags-$(CONFIG_X86_SUMMIT)	:= -Iinclude/asm-x86/mach-summit
-mcore-$(CONFIG_X86_SUMMIT)	:= arch/x86/mach-default/
-
 # generic subarchitecture
 mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
 
-
-# ES7000 subarch support
-mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-x86/mach-es7000
-fcore-$(CONFIG_X86_ES7000)	:= arch/x86/mach-es7000/
-mcore-$(CONFIG_X86_ES7000)	:= arch/x86/mach-default/
-
 # RDC R-321x subarch support
 mflags-$(CONFIG_X86_RDC321X)	:= -Iinclude/asm-x86/mach-rdc321x
 mcore-$(CONFIG_X86_RDC321X)	:= arch/x86/mach-default/
@@ -160,6 +142,7 @@ KBUILD_AFLAGS += $(mflags-y)
 
 head-y := arch/x86/kernel/head_$(BITS).o
 head-y += arch/x86/kernel/head$(BITS).o
+head-y += arch/x86/kernel/head.o
 head-y += arch/x86/kernel/init_task.o
 
 libs-y  += arch/x86/lib/
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 11629e903aa..bc5553b496f 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -218,10 +218,6 @@ static char *vidmem;
 static int vidport;
 static int lines, cols;
 
-#ifdef CONFIG_X86_NUMAQ
-void *xquad_portio;
-#endif
-
 #include "../../../../lib/inflate.c"
 
 static void *malloc(int size)
diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c
index acad32eb429..53165c97336 100644
--- a/arch/x86/boot/memory.c
+++ b/arch/x86/boot/memory.c
@@ -13,6 +13,7 @@
  */
 
 #include "boot.h"
+#include <linux/kernel.h>
 
 #define SMAP	0x534d4150	/* ASCII "SMAP" */
 
@@ -53,7 +54,7 @@ static int detect_memory_e820(void)
 
 		count++;
 		desc++;
-	} while (next && count < E820MAX);
+	} while (next && count < ARRAY_SIZE(boot_params.e820_map));
 
 	return boot_params.e820_entries = count;
 }
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 53557cbe4bf..d1d4ee89527 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the linux kernel.
 #
 
-extra-y                := head_$(BITS).o head$(BITS).o init_task.o vmlinux.lds
+extra-y                := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinux.lds
 
 CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
@@ -22,7 +22,7 @@ obj-y			+= setup_$(BITS).o i8259.o irqinit_$(BITS).o setup.o
 obj-$(CONFIG_X86_32)	+= sys_i386_32.o i386_ksyms_32.o
 obj-$(CONFIG_X86_64)	+= sys_x86_64.o x8664_ksyms_64.o
 obj-$(CONFIG_X86_64)	+= syscall_64.o vsyscall_64.o setup64.o
-obj-y			+= bootflag.o e820_$(BITS).o
+obj-y			+= bootflag.o e820.o
 obj-y			+= pci-dma.o quirks.o i8237.o topology.o kdebugfs.o
 obj-y			+= alternative.o i8253.o pci-nommu.o
 obj-y			+= tsc_$(BITS).o io_delay.o rtc.o
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index ff1a7b49a46..6516359922b 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -83,6 +83,8 @@ int acpi_lapic;
 int acpi_ioapic;
 int acpi_strict;
 
+static int disable_irq0_through_ioapic __initdata;
+
 u8 acpi_sci_flags __initdata;
 int acpi_sci_override_gsi __initdata;
 int acpi_skip_timer_override __initdata;
@@ -338,8 +340,6 @@ acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long e
 
 #ifdef CONFIG_X86_IO_APIC
 
-struct mp_ioapic_routing mp_ioapic_routing[MAX_IO_APICS];
-
 static int __init
 acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
 {
@@ -858,6 +858,372 @@ static int __init acpi_parse_madt_lapic_entries(void)
 #endif				/* CONFIG_X86_LOCAL_APIC */
 
 #ifdef	CONFIG_X86_IO_APIC
+#define MP_ISA_BUS		0
+
+#ifdef CONFIG_X86_ES7000
+extern int es7000_plat;
+#endif
+
+static struct {
+	int apic_id;
+	int gsi_base;
+	int gsi_end;
+	DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
+static int mp_find_ioapic(i