Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6

9 files changed, 28 insertions, 17 deletions

diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index fa12b9060b0..29bf33692f7 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -1615,7 +1615,7 @@ static int ath_tx_setup_buffer(struct ieee80211_hw *hw, struct ath_buf *bf,
 		bf->bf_frmlen -= padsize;
 	}
 
-	if (conf_is_ht(&hw->conf) && !is_pae(skb))
+	if (conf_is_ht(&hw->conf))
 		bf->bf_state.bf_type |= BUF_HT;
 
 	bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq);
@@ -1701,7 +1701,7 @@ static void ath_tx_start_dma(struct ath_softc *sc, struct ath_buf *bf,
 			goto tx_done;
 		}
 
-		if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+		if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) {
 			/*
 			 * Try aggregation if it's a unicast data frame
 			 * and the destination is HT capable.
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fe3bf949199..c484cc25389 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -115,6 +115,7 @@
 #define B43_MMIO_TSF_2			0x636	/* core rev < 3 only */
 #define B43_MMIO_TSF_3			0x638	/* core rev < 3 only */
 #define B43_MMIO_RNG			0x65A
+#define B43_MMIO_IFSSLOT		0x684	/* Interframe slot time */
 #define B43_MMIO_IFSCTL			0x688 /* Interframe space control */
 #define  B43_MMIO_IFSCTL_USE_EDCF	0x0004
 #define B43_MMIO_POWERUP_DELAY		0x6A8
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 4c41cfe44f2..490fb45d1d0 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -628,10 +628,17 @@ static void b43_upload_card_macaddress(struct b43_wldev *dev)
 static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
 {
 	/* slot_time is in usec. */
-	if (dev->phy.type != B43_PHYTYPE_G)
+	/* This test used to exit for all but a G PHY. */
+	if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
 		return;
-	b43_write16(dev, 0x684, 510 + slot_time);
-	b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+	b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
+	/* Shared memory location 0x0010 is the slot time and should be
+	 * set to slot_time; however, this register is initially 0 and changing
+	 * the value adversely affects the transmit rate for BCM4311
+	 * devices. Until this behavior is unterstood, delete this step
+	 *
+	 * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+	 */
 }
 
 static void b43_short_slot_timing_enable(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 5461f105bd2..d10bea64fce 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2744,6 +2744,7 @@ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
 		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
 			priv->staging_rxon.flags = 0;
 
+		iwl_set_rxon_ht(priv, ht_conf);
 		iwl_set_rxon_channel(priv, conf->channel);
 
 		iwl_set_flags_for_band(priv, conf->channel->band);
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 6d6ed748517..f727b4a8319 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -794,7 +794,7 @@ static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf,
 	}
 
 	bss->bss = kzalloc(bss_len, GFP_KERNEL);
-	if (!bss) {
+	if (!bss->bss) {
 		kfree(bss);
 		IWM_ERR(iwm, "Couldn't allocate bss\n");
 		return -ENOMEM;
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index bc5726dd5fe..7ba3052b070 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -65,6 +65,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
 	/* Sitecom */
 	{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+	{USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
 	/* Sphairon Access Systems GmbH */
 	{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
 	/* Dick Smith Electronics */
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index 5681ebed9c6..03dfd27c4bf 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -494,8 +494,7 @@ static int ssb_devices_register(struct ssb_bus *bus)
 #endif
 			break;
 		case SSB_BUSTYPE_SDIO:
-#ifdef CONFIG_SSB_SDIO
-			sdev->irq = bus->host_sdio->dev.irq;
+#ifdef CONFIG_SSB_SDIOHOST
 			dev->parent = &bus->host_sdio->dev;
 #endif
 			break;
diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c
index 1f2db647bb5..22f0c2aa7a8 100644
--- a/net/mac80211/ibss.c
+++ b/net/mac80211/ibss.c
@@ -647,7 +647,7 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata,
 	}
 	if (pos[1] != 0 &&
 	    (pos[1] != ifibss->ssid_len ||
-	     !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
+	     memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
 		/* Ignore ProbeReq for foreign SSID */
 		return;
 	}
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index f934c9620b7..bc17cf7d68d 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -439,6 +439,16 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 	if (local->scan_req)
 		return -EBUSY;
 
+	if (req != local->int_scan_req &&
+	    sdata->vif.type == NL80211_IFTYPE_STATION &&
+	    !list_empty(&ifmgd->work_list)) {
+		/* actually wait for the work it's doing to finish/time out */
+		set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+		local->scan_req = req;
+		local->scan_sdata = sdata;
+		return 0;
+	}
+
 	if (local->ops->hw_scan) {
 		u8 *ies;
 
@@ -463,14 +473,6 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 	local->scan_req = req;
 	local->scan_sdata = sdata;
 
-	if (req != local->int_scan_req &&
-	    sdata->vif.type == NL80211_IFTYPE_STATION &&
-	    !list_empty(&ifmgd->work_list)) {
-		/* actually wait for the work it's doing to finish/time out */
-		set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
-		return 0;
-	}
-
 	if (local->ops->hw_scan)
 		__set_bit(SCAN_HW_SCANNING, &local->scanning);
 	else