Age | Commit message (Collapse) | Author |
|
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Do not call SplitBlockPredecessors on a loop preheader when one of the
predecessors is an indirectbr. Otherwise, you will hit this assert:
!isa<IndirectBrInst>(Preds[i]->getTerminator()) && "Cannot split an edge from an IndirectBrInst"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153134 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
run with LIT now and now Dejagnu. dg.exp is no longer needed.
Patch reviewed by Daniel Dunbar. It will be followed by additional cleanup patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150664 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
header is a landing pad correctly (by splitting the landingpad out of the loop header). Make some adjustments to the rest of LoopSimplify to make it clear that the rest of LoopSimplify isn't making bad assumptions about the presence of landing pads. PR11575.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146621 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
match the required format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141825 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140103 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140101 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139578 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138916 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138915 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138914 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138903 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ssa, so it has to be run really early in the pipeline. Any replacement
should probably use the SSAUpdater.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138841 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
to notify SCEV of a change. Add forgetLoop in a couple of those places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136797 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
are either unreduced or only test old syntax.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133228 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
For example, on 32-bit architecture, don't promote all uses of the IV
to 64-bits just because one use is a 64-bit cast.
Alternate implementation of the patch by Arnaud de Grandmaison.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127884 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125317 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
described
in the PR, the pass could break LCSSA form when inserting preheaders. It probably
would be easy enough to fix this, but since currently we always go into LCSSA form
after running this pass, doing so is not urgent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122695 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
into an inner loop, as the new loop iteration may differ substantially.
This fixes PR8078.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113057 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@111061 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This fixes PR7649.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108513 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
it may be used in contexts where preheader insertion may have failed due
to an indirectbr.
Make LoopSimplify's LoopSimplify::SeparateNestedLoop properly fail in
the case that it would require splitting an indirectbr edge.
These fix PR5502.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89484 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
unsplittable critical edges, which means the introduction of
loops which cannot be transformed to LoopSimplify form. Fix
LoopSimplify to avoid transforming such loops into invalid
code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86176 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
-verify-dom-info and -verify-loop-info, which enable additional
(expensive) consistency checks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85017 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
where a loop's header is being split and it has predecessors which are not
contained by the most-nested loop which contains the loop.
This fixes PR5235.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84505 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
the PassManager code into a regular verifyAnalysis method.
Also, reorganize loop verification. Make the LoopPass infrastructure
call verifyLoop as needed instead of having LoopInfo::verifyAnalysis
check every loop in the function after each looop pass. Add a new
command-line argument, -verify-loop-info, to enable the expensive
full checking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82952 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81537 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81261 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81257 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
of using llvm-as, now that opt supports this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81226 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
when one of them can be converted to a trivial icmp and conditional
branch.
This addresses what is essentially a phase ordering problem.
SimplifyCFG knows how to do this transformation, but it doesn't do so
if the primary block has any instructions in it other than an icmp and
a branch. In the given testcase, the block contains other instructions,
however they are loop-invariant and can be hoisted. SimplifyCFG doesn't
have LoopInfo though, so it can't hoist them. And, it's important that
the blocks be merged before LoopRotation, as it doesn't support
multiple-exit loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74396 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
PR4238.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72223 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
that it can't be trivially eliminated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70334 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51349 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
renaming to isnan2. Now that no test has llx ending there is no need to search for them from dg.exp too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51328 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48762 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
can have uses too. Wouldn't it be nice if invoke didn't exist? :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43426 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41097 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37801 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Upgrade to use new Tcl exec based test harness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36062 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35918 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
kept around. We can do without it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32960 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32957 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Update the test suite to accommodate the change from signed integer types
to signless integer types. The changes were of only a few kinds:
1. Make sure llvm-upgrade is run on the source which does the bulk of the
changes automatically.
2. Change things like "grep 'int'" to "grep 'i32'"
3. In several tests bitcasting caused the same name to be reused in the
same type plane. These had to be manually fixed. The fix was (generally)
to leave the bitcast and provide the instruction with a new name. This
should not affect the semantics of the test. In a few cases, the
bitcasts were known to be superfluous and irrelevant to the test case
so they were removed.
4. One test case uses a bytecode file which needed to be updated to the
latest bytecode format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32789 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32751 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32143 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32115 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29646 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27635 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
with srcdir = objdir to see what's okay and what's cruft. So, in goes a
bunch of .cvsignore files to shut cvs up about known output from running
"make check".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27009 91177308-0d34-0410-b5e6-96231b3b80d8
|