| Age | Commit message (Collapse) | Author |
|---|
|
longer would violate any dependency layering and it is in fact an
analysis. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171686 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.
The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.
The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.
The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.
The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.
The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.
The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.
The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.
Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.
Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.
Commits to update DragonEgg and Clang will be made presently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171681 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
interfaces which could be extracted from it, and must be provided on
construction, to a chained analysis group.
The end goal here is that TTI works much like AA -- there is a baseline
"no-op" and target independent pass which is in the group, and each
target can expose a target-specific pass in the group. These passes will
naturally chain allowing each target-specific pass to delegate to the
generic pass as needed.
In particular, this will allow a much simpler interface for passes that
would like to use TTI -- they can have a hard dependency on TTI and it
will just be satisfied by the stub implementation when that is all that
is available.
This patch is a WIP however. In particular, the "stub" pass is actually
the one and only pass, and everything there is implemented by delegating
to the target-provided interfaces. As a consequence the tools still have
to explicitly construct the pass. Switching targets to provide custom
passes and sinking the stub behavior into the NoTTI pass is the next
step.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171621 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
VectorTargetTransformInfo into the TargetTransformInfo pass,
implementing them be delegating back out to the two subobjects.
This is the first step to folding the interfaces together and making
TargetTransformInfo a normal analysis pass (specifically an analysis
group which targets can provide target-specific analysis pass
implementations of).
No callers are migrated here, this just stubs out the interface. Next
step will be to migrate all the callers to directly operate on TTI
instead of STTI or VTTI respectively. That will allow replacing the
machinery for delivering TTI without changing every caller at once.
WIP, I promise all the duplicated interfaces will be removed in the end,
this just decouples the steps of the process.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171615 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
unused, there were transitive includes needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171613 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171612 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
legality of an address mode to not use a struct of four values and
instead to accept them as parameters. I'd love to have named parameters
here as most callers only care about one or two of these, but the
defaults aren't terribly scary to write out.
That said, there is no real impact of this as the passes aren't yet
using STTI for this and are still relying upon TargetLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171595 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
1. Add code to estimate register pressure.
2. Add code to select the unroll factor based on register pressure.
3. Add bits to TargetTransformInfo to provide the number of registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171469 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171459 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
In order to cost subvector insertion and extraction, we need to know
the type of the subvector being extracted.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171453 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
When Kind == (Broadcast or Reverse) then Index is not used; make it an optional parameter.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171447 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- Fix a typo
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171399 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
support for the insert-subvector and extract-subvector kinds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171027 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
for broadcast and adds a more general API that accepts an enum of known shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171022 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
them more expensive.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170995 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
ScalarTargetTransformInfo::getIntImmCost() instead. "Legal" is a poorly defined
term for something like integer immediate materialization. It is always possible
to materialize an integer immediate. Whether to use it for memcpy expansion is
more a "cost" conceern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169929 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- added function to VectorTargetTransformInfo to query cost of intrinsics
- vectorize trivially vectorizable intrinsic calls such as sin, cos, log, etc.
Reviewed by: Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169711 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- fix a bug which cause sigfault.
- add two testing cases which was causing crash
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169687 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
There are still bugs in this pass, as well as other issues that are
being worked on, but the bugs are crashers that occur pretty easily in
the wild. Test cases have been sent to the original commit's review
thread.
This reverts the commits:
r169671: Fix a logic error.
r169604: Move the popcnt tests to an X86 subdirectory.
r168931: Initial commit adding the pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169683 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
AKA: Recompile *ALL* the source code!
This one went much better. No manual edits here. I spot-checked for
silliness and grep-checked for really broken edits and everything seemed
good. It all still compiles. Yell if you see something that looks goofy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169133 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This revision attempts to recognize following population-count pattern:
while(a) { c++; ... ; a &= a - 1; ... },
where <c> and <a>could be used multiple times in the loop body.
TODO: On X8664 and ARM, __buildin_ctpop() are not expanded to a efficent
instruction sequence, which need to be improved in the following commits.
Reviewed by Nadav, really appreciate!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168931 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167329 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
When the switch-to-lookup tables transform landed in SimplifyCFG, it
was pointed out that this could be inappropriate for some targets.
Since there was no way at the time for the pass to know anything about
the target, an awkward reverse-transform was added in CodeGenPrepare
that turned lookup tables back into switches for some targets.
This patch uses the new TargetTransformInfo to determine if a
switch should be transformed, and removes
CodeGenPrepare::ConvertLoadToSwitch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167011 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166936 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Add getCostXXX calls for different families of opcodes, such as casts, arithmetic, cmp, etc.
Port the LoopVectorizer to the new API.
The LoopVectorizer now finds instructions which will remain uniform after vectorization. It uses this information when calculating the cost of these instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166836 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
As discussed on IRC, add VectorTargetTransform::getNumberOfParts
to provide a stable interface to the vector legalization splitting factor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166751 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
and bb vectorizers for modeling the cost of instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166593 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Lowerinvoke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166248 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
The TargetTransform changes are breaking LTO bootstraps of clang. I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.
This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166168 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
-Wnon-virtual-dtor for real.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165787 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165665 91177308-0d34-0410-b5e6-96231b3b80d8
|
