Age | Commit message (Collapse) | Author |
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173578 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
factor the realpath calls into FileManager::getCanonicalName() so we
can cache the results of this epically slow operation. 5% speedup on
my modules test, and realpath drops out of the profile.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@173542 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
a file or directory, allowing just a stat call if a file descriptor
is not needed.
Doing just 'stat' is faster than 'open/fstat/close'.
This has the effect of cutting down system time for validating the input files of a PCH.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@169831 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
uncovered.
This required manually correcting all of the incorrect main-module
headers I could find, and running the new llvm/utils/sort_includes.py
script over the files.
I also manually added quite a few missing headers that were uncovered by
shuffling the order or moving headers up to be main-module-headers.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@169237 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@167468 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
- The whole {File,Source}Manager is built around wanting to pre-determine the
size of files, so we can't fit this in naturally. Instead, we handle it like
we do STDIN, where we just replace the main file contents upfront.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@167419 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Clear the FileManager's stat cache in between running
translation units, as the stat cache loaded from a pch
is only valid for one compiler invocation.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@161047 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
as "volatile", meaning there's a high enough chance that they may
change while we are trying to use them.
This flag is only enabled by libclang.
Currently "volatile" source files will be stat'ed immediately
before opening them, because the file size stat info
may not be accurate since when we got it (e.g. from the PCH).
This avoids crashes when trying to reference mmap'ed memory
from a file whose size is not what we expect.
Note that there's still a window for a racing issue to occur
but the window for it should be way smaller than before.
We can consider later on to avoid mmap completely on such files.
rdar://11612916
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@160074 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@160041 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Implement UniqueFileContainer::erase(), camelCase, add comment on future optimizations of the cache versus de-optimizations of invalidations.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@159997 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@159262 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
add interface for removing a FileEntry from the cache.
Forces a re-read the contents from disk, e.g. because a tool (like cling) wants to pick up a modified file.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@159256 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
should be better fix for PR10331, or, "clang X:\foo.c" fails.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@158596 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
broken duplicates of comments that are in the corresponding header files.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@158550 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
validate that we didn't override the contents of any of such files.
If this is detected, emit a diagnostic error and recover gracefully
by using the contents of the original file that the PCH was built from.
Part of rdar://11305263
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@156107 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(I was going to fix the TODO about DenseMap too, but
that would break self-host right now. See PR11922.)
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@149799 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@149798 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@147195 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
with trailing separators. (tested on Windows and Darwin)."
It caused PR10331. MSVCRT stat() cannot strip trailing '/'. (can '\')
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@144884 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@143889 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
target triple to separate modules built under different
conditions. The hash is used to create a subdirectory in the module
cache path where other invocations of the compiler (with the same
version, language options, etc.) can find the precompiled modules.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@139662 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
but there is a corresponding umbrella header in a framework, build the
module on-the-fly so it can be immediately loaded at the import
statement. This is very much proof-of-concept code, with details to be
fleshed out over time.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@139558 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
LLVM.h imports
them into the clang namespace.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@135852 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
(tested on Windows and Darwin).
This fixes a bug on Windows:
clang c:\test.cpp
Here the call stat("c:") is not recognized as a directory (must be "c:\").
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@132539 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
against the working directory specified in the file system options.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@127893 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
and leaking of file descriptors.
Add 'openFile' bool to FileManager::getFile to specify whether we want to have the file opened or not, have it
false by default, and enable it only in HeaderSearch.cpp where the open+fstat optimization matters.
Fixes rdar://9139899.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@127748 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
After the open+fstat optimization, files were already opened for FileManager::getBufferForFile() and we closed them after reading them.
The problem was that when -working-directory was passed, the code path that actually reuses & closes the already opened file descriptor
was not followed.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@127639 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@127573 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@127144 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@127133 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
Reviewed by dgregor.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@125407 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
This patch contains:
- making some of the existing comments more accurate in the presence
of virtual files/directories.
- renaming some private data members of FileManager to match their roles better.
- creating 'DirectorEntry's for the parent directories of virtual
files, such that we can tell whether two virtual files are from the
same directory. This is useful for injecting virtual files whose
directories don't exist in the real file system.
- minor clean-ups and adding comments for class
FileManager::UniqueDirContainer and FileManager::UniqueFileContainer.
- adding statistics on virtual files to FileManager::PrintStats().
- adding unit tests to verify the existing and new behavior of FileManager.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@125384 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
AST/PCH files more lazy:
- Don't preload all of the file source-location entries when reading
the AST file. Instead, load them lazily, when needed.
- Only look up header-search information (whether a header was already
#import'd, how many times it's been included, etc.) when it's needed
by the preprocessor, rather than pre-populating it.
Previously, we would pre-load all of the file source-location entries,
which also populated the header-search information structure. This was
a relatively minor performance issue, since we would end up stat()'ing
all of the headers stored within a AST/PCH file when the AST/PCH file
was loaded. In the normal PCH use case, the stat()s were cached, so
the cost--of preloading ~860 source-location entries in the Cocoa.h
case---was relatively low.
However, the recent optimization that replaced stat+open with
open+fstat turned this into a major problem, since the preloading of
source-location entries would now end up opening those files. Worse,
those files wouldn't be closed until the file manager was destroyed,
so just opening a Cocoa.h PCH file would hold on to ~860 file
descriptors, and it was easy to blow through the process's limit on
the number of open file descriptors.
By eliminating the preloading of these files, we neither open nor stat
the headers stored in the PCH/AST file until they're actually needed
for something. Concretely, we went from
*** HeaderSearch Stats:
835 files tracked.
364 #import/#pragma once files.
823 included exactly once.
6 max times a file is included.
3 #include/#include_next/#import.
0 #includes skipped due to the multi-include optimization.
1 framework lookups.
0 subframework lookups.
*** Source Manager Stats:
835 files mapped, 3 mem buffers mapped.
37460 SLocEntry's allocated, 11215575B of Sloc address space used.
62 bytes of files mapped, 0 files with line #'s computed.
with a trivial program that uses a chained PCH including a Cocoa PCH
to
*** HeaderSearch Stats:
4 files tracked.
1 #import/#pragma once files.
3 included exactly once.
2 max times a file is included.
3 #include/#include_next/#import.
0 #includes skipped due to the multi-include optimization.
1 framework lookups.
0 subframework lookups.
*** Source Manager Stats:
3 files mapped, 3 mem buffers mapped.
37460 SLocEntry's allocated, 11215575B of Sloc address space used.
62 bytes of files mapped, 0 files with line #'s computed.
for the same program.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@125286 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@125129 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
overridden via remapping. Thus, when we create a "virtual" file in the
file manager, we still stat() the real file that lives behind it so
that we can provide proper uniquing based on inodes. This helps keep
the file manager much more consistent.
To take advantage of this when reparsing files in libclang, we disable
the use of the stat() cache when reparsing or performing code
completion, since the stat() cache is very likely to be out of date in
this use case.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@124971 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
links.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@124776 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
redundant searches in the string. No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@124760 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
on that name. Canonicalization eliminates silliness such as "." and
"foo/.." that breaks the uniquing of files in the presence of virtual
files or files whose inode numbers have changed during
parsing/re-parsing. c-index-test isn't able to create this crazy
situation, so I've resorted to testing outside of the Clang
tree. Fixes <rdar://problem/8928220>.
Note that this hackery will go away once we have a real virtual file
system on which we can layer FileManager; the virtual-files hack is
showing cracks.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@124754 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
invalid PresomedLoc, instead of just silencing it.
FileManager.cpp: Allow virtual files in nonexistent directories.
FileManager.cpp: Close FileDescriptor for virtual files that correspond to actual files.
FileManager.cpp: Enable virtual files to be created even for files that were flagged as NON_EXISTENT_FILE, e.g. by a prior (unsuccessful) addFile().
ASTReader.cpp: Read a PCH even if the original source files cannot be found.
Add a test for reading a PCH of a file that has been removed and diagnostics referencing that file.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@124374 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@122340 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@122087 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@121956 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@121378 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@120688 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@120297 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
followed by an open for every source file we open, probe the file system with
'open' and then do an fstat when it succeeds. open+fstat is faster than
stat+open because the kernel only has to perform the string->inode mapping
once. Presumably it gets faster the deeper in your filesystem a lookup
happens.
For -Eonly on cocoa.h, this reduces system time from 0.042s to 0.039s on
my machine, a 7.7% speedup.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@120066 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@120061 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
pointer that is passed down through the APIs, and make
FileSystemStatCache::get be the one that filters out
directory lookups that hit files. This also paves the
way to have stat queries be able to return opened files.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@120060 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
which simplifies clients and is important for future directions.
Add a FD member to FileEntry which isn't used but will be shortly.
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@120056 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
git-svn-id: https://llvm.org/svn/llvm-project/cfe/trunk@120048 91177308-0d34-0410-b5e6-96231b3b80d8
|