From 38ac08c1c25adf42cf20e48e10e6ddeab6a12d71 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Fri, 23 Aug 2019 15:51:00 +0200 Subject: tcl: replace the deprecated commands with "adapter ..." Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel --- tcl/tools/firmware-recovery.tcl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'tcl/tools') diff --git a/tcl/tools/firmware-recovery.tcl b/tcl/tools/firmware-recovery.tcl index 8e017ce5..8b28656a 100644 --- a/tcl/tools/firmware-recovery.tcl +++ b/tcl/tools/firmware-recovery.tcl @@ -29,7 +29,7 @@ dump_part save partition's contents to a file erase_part erase the given partition flash_part erase, flash and verify the given partition ram_boot load binary file to RAM and run it -adapter_khz set JTAG clock frequency in kHz +adapter speed set JTAG clock frequency in kHz For example, to clear nvram and reflash CFE on an RT-N16 using TUMPA, run: openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\ @@ -39,7 +39,7 @@ openocd -f interface/ftdi/tumpa.cfg -f tools/firmware-recovery.tcl \\ } # set default, can be overriden later -adapter_khz 1000 +adapter speed 1000 proc get_partition { name } { global partition_list -- cgit v1.2.3-18-g5258