From adb8ec32dc7439aa3e34ab19f026e390ec129c10 Mon Sep 17 00:00:00 2001
From: Spencer Oliver <spen@spen-soft.co.uk>
Date: Mon, 12 Nov 2012 15:06:37 +0000
Subject: icdi: add TI icdi interface

This is the new proprietary interface replacing the older FTDI based adapters.
It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad.

Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/922
Tested-by: jenkins
---
 tcl/target/stellaris_icdi.cfg | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 tcl/target/stellaris_icdi.cfg

(limited to 'tcl/target')

diff --git a/tcl/target/stellaris_icdi.cfg b/tcl/target/stellaris_icdi.cfg
new file mode 100644
index 00000000..11d57c26
--- /dev/null
+++ b/tcl/target/stellaris_icdi.cfg
@@ -0,0 +1,34 @@
+#
+# lm3s icdi pseudo target
+#
+
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME lm3s
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 16kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x4000
+}
+
+#
+# possible value are hla_jtag
+# currently swd is not supported
+#
+transport select hla_jtag
+
+# do not check id as icdi currently does not support it
+hla newtap $_CHIPNAME cpu -expected-id 0
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+# flash configuration ... autodetects sizes, autoprobed
+flash bank $_CHIPNAME.flash stellaris 0 0 0 0 $_TARGETNAME
-- 
cgit v1.2.3-18-g5258