From 38ac08c1c25adf42cf20e48e10e6ddeab6a12d71 Mon Sep 17 00:00:00 2001 From: Antonio Borneo Date: Fri, 23 Aug 2019 15:51:00 +0200 Subject: tcl: replace the deprecated commands with "adapter ..." Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel --- tcl/target/str730.cfg | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'tcl/target/str730.cfg') diff --git a/tcl/target/str730.cfg b/tcl/target/str730.cfg index 48d3134a..9a271947 100644 --- a/tcl/target/str730.cfg +++ b/tcl/target/str730.cfg @@ -1,6 +1,6 @@ #STR730 CPU -adapter_khz 3000 +adapter speed 3000 if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME @@ -27,15 +27,15 @@ reset_config trst_and_srst srst_pulls_trst jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0x0f -expected-id $_CPUTAPID #jtag nTRST and nSRST delay -adapter_nsrst_delay 500 +adapter srst delay 500 jtag_ntrst_delay 500 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm7tdmi -endian little -chain-position 0 -$_TARGETNAME configure -event reset-start { adapter_khz 10 } +$_TARGETNAME configure -event reset-start { adapter speed 10 } $_TARGETNAME configure -event reset-init { - adapter_khz 3000 + adapter speed 3000 # Because the hardware cannot be interrogated for the protection state # of sectors, initialize all the sectors to be unprotected. The initial -- cgit v1.2.3-18-g5258