From acc4bb83fd1f26a677fdc2c8ccdc7a235f877d2d Mon Sep 17 00:00:00 2001
From: Spencer Oliver <spen@spen-soft.co.uk>
Date: Tue, 6 Aug 2013 13:12:10 +0100
Subject: cfg: add stm32 cmsis-dap compliant config

Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1543
Tested-by: jenkins
---
 tcl/target/stm32f0x.cfg | 55 +++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 tcl/target/stm32f0x.cfg

(limited to 'tcl/target/stm32f0x.cfg')

diff --git a/tcl/target/stm32f0x.cfg b/tcl/target/stm32f0x.cfg
new file mode 100644
index 00000000..104dcb9c
--- /dev/null
+++ b/tcl/target/stm32f0x.cfg
@@ -0,0 +1,55 @@
+# script for stm32f0x family
+
+#
+# stm32 devices support SWD transports only.
+#
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME stm32f0x
+}
+
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 4kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x1000
+}
+
+#jtag scan chain
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # See STM Document RM0091
+  # Section 29.5.3
+   set _CPUTAPID 0x0bb11477
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+# flash size will be probed
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f1x 0x08000000 0 0 0 $_TARGETNAME
+
+# adapter speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
+adapter_khz 1000
+
+adapter_nsrst_delay 100
+
+# if srst is not fitted use SYSRESETREQ to
+# perform a soft reset
+cortex_m reset_config sysresetreq
-- 
cgit v1.2.3-18-g5258