From 3a7ca6a6212304dbc794e1f6935e72571d198595 Mon Sep 17 00:00:00 2001 From: Neil Jensen Date: Fri, 24 Feb 2012 16:31:44 -0600 Subject: cfg: beaglebone cleanup Simplified the configuration and removed things that were not necessary for debugging. Also added reset configuration. Signed-off-by: Neil Jensen Change-Id: I96f991c3051aa68278212cd6509484cbce40ccb7 Reviewed-on: http://openocd.zylin.com/488 Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/board/ti_beaglebone.cfg | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) (limited to 'tcl/board/ti_beaglebone.cfg') diff --git a/tcl/board/ti_beaglebone.cfg b/tcl/board/ti_beaglebone.cfg index c9a54b0b..dffb07f8 100644 --- a/tcl/board/ti_beaglebone.cfg +++ b/tcl/board/ti_beaglebone.cfg @@ -3,8 +3,12 @@ interface ft2232 ft2232_layout xds100v2 ft2232_vid_pid 0x0403 0xa6d0 -#jtag_rclk 10 -adapter_khz 1000 +adapter_khz 16000 + +reset_config trst_and_srst + + + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME @@ -73,20 +77,8 @@ target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.dap -dbgbase 0x8 # SRAM: 64K at 0x4030.0000; use the first 16K $_TARGETNAME configure -work-area-phys 0x40300000 -work-area-size 0x4000 -$_TARGETNAME configure -event reset-assert "am335x_dbginit $_TARGETNAME" -$_TARGETNAME configure -event reset-assert-post "am335x_dbginit $_TARGETNAME" - $_TARGETNAME configure -event gdb-attach { - global _TARGETNAME - am335x_dbginit $_TARGETNAME - echo "Halting target" - halt -} - -# Run this to enable invasive debugging. This is run automatically in the -# reset sequence. -proc am335x_dbginit {target} { - # General Cortex A8 debug initialisation cortex_a8 dbginit + halt } -- cgit v1.2.3-18-g5258