From 855bd0ab621c3a167b36764827952a346c656c62 Mon Sep 17 00:00:00 2001 From: ntfreak Date: Wed, 3 Dec 2008 12:02:46 +0000 Subject: - cleanup target config scripts git-svn-id: svn://svn.berlios.de/openocd/trunk@1202 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- src/target/target/lm3s3748.cfg | 2 +- src/target/target/lm3s6965.cfg | 3 +-- src/target/target/lm3s811.cfg | 2 +- src/target/target/stm32.cfg | 2 -- src/target/target/stm32stick.cfg | 2 +- src/target/target/str710.cfg | 3 +-- src/target/target/str730.cfg | 3 +-- src/target/target/str750.cfg | 3 +-- src/target/target/str910-eval.cfg | 27 +++++++++++++++++++-------- src/target/target/str912.cfg | 4 +--- src/target/target/str9comstick.cfg | 4 ++-- 11 files changed, 29 insertions(+), 26 deletions(-) (limited to 'src') diff --git a/src/target/target/lm3s3748.cfg b/src/target/target/lm3s3748.cfg index f3ed12e2..7321cb8a 100644 --- a/src/target/target/lm3s3748.cfg +++ b/src/target/target/lm3s3748.cfg @@ -20,7 +20,7 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { # force an error till we get a good number - set _CPUTAPID 0xffffffff + set _CPUTAPID 0x3ba00477 } # RCLK diff --git a/src/target/target/lm3s6965.cfg b/src/target/target/lm3s6965.cfg index 8fdc9c89..27b104ff 100644 --- a/src/target/target/lm3s6965.cfg +++ b/src/target/target/lm3s6965.cfg @@ -18,7 +18,7 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { # force an error till we get a good number - set _CPUTAPID 0xffffffff + set _CPUTAPID 0x3ba00477 } # jtag speed @@ -33,7 +33,6 @@ reset_config srst_only #jtag scan chain jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID - # the luminary variant causes a software reset rather than asserting SRST # this stops the debug registers from being cleared # this will be fixed in later revisions of silicon diff --git a/src/target/target/lm3s811.cfg b/src/target/target/lm3s811.cfg index e6a7d05f..2fa914fa 100644 --- a/src/target/target/lm3s811.cfg +++ b/src/target/target/lm3s811.cfg @@ -17,7 +17,7 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { # force an error till we get a good number - set _CPUTAPID 0xffffffff + set _CPUTAPID 0x3ba00477 } # jtag speed diff --git a/src/target/target/stm32.cfg b/src/target/target/stm32.cfg index c9581d49..ed6cec4c 100644 --- a/src/target/target/stm32.cfg +++ b/src/target/target/stm32.cfg @@ -12,7 +12,6 @@ if { [info exists ENDIAN] } { set _ENDIAN little } - # jtag speed jtag_khz 500 @@ -51,7 +50,6 @@ target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNA $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0 - flash bank stm32x 0 0 0 0 0 # For more information about the configuration files, take a look at: diff --git a/src/target/target/stm32stick.cfg b/src/target/target/stm32stick.cfg index bb297dd7..3e9997d7 100644 --- a/src/target/target/stm32stick.cfg +++ b/src/target/target/stm32stick.cfg @@ -35,7 +35,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xf -irmask 0xe -expected-id $_CP # The boundery scan register, leave the "expected-id" undefined. jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1e -# What is this? It must be some extra chip on the stm32stick... +# configure str750 connected to jtag chain jtag newtap $_CHIPNAME unknown -irlen 4 -ircapture 0x1 -irmask 0x0f set _TARGETNAME [format "%s.cpu" $_CHIPNAME] diff --git a/src/target/target/str710.cfg b/src/target/target/str710.cfg index de3b0b9e..150656d7 100644 --- a/src/target/target/str710.cfg +++ b/src/target/target/str710.cfg @@ -16,10 +16,9 @@ if { [info exists ENDIAN] } { if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID } else { - set _CPUTAPID 0xffffffff + set _CPUTAPID 0x3f0f0f0f } - #use combined on interfaces or targets that can't set TRST/SRST separately reset_config trst_and_srst srst_pulls_trst diff --git a/src/target/target/str730.cfg b/src/target/target/str730.cfg index c0dfcdd1..65c8a57f 100644 --- a/src/target/target/str730.cfg +++ b/src/target/target/str730.cfg @@ -17,10 +17,9 @@ if { [info exists ENDIAN] } { if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID } else { - set _CPUTAPID 0xffffffff + set _CPUTAPID 0x3f0f0f0f } - #use combined on interfaces or targets that can't set TRST/SRST separately #reset_config trst_and_srst srst_pulls_trst reset_config trst_and_srst srst_pulls_trst diff --git a/src/target/target/str750.cfg b/src/target/target/str750.cfg index 806bbfa1..b17fd217 100644 --- a/src/target/target/str750.cfg +++ b/src/target/target/str750.cfg @@ -15,13 +15,12 @@ if { [info exists ENDIAN] } { if { [info exists CPUTAPID] } { set _CPUTAPID $CPUTAPID } else { - set _CPUTAPID 0xffffffff + set _CPUTAPID 0x4f1f0041 } # jtag speed jtag_khz 10 - #use combined on interfaces or targets that can't set TRST/SRST separately #reset_config trst_and_srst srst_pulls_trst reset_config trst_and_srst srst_pulls_trst diff --git a/src/target/target/str910-eval.cfg b/src/target/target/str910-eval.cfg index 44edeaa4..df0ce379 100644 --- a/src/target/target/str910-eval.cfg +++ b/src/target/target/str910-eval.cfg @@ -18,8 +18,7 @@ if { [info exists ENDIAN] } { if { [info exists FLASHTAPID ] } { set _FLASHTAPID $FLASHTAPID } else { - # Fixme with a correct number! - set _FLASHTAPID 0xFFFFFFFF + set _FLASHTAPID 0x04570041 } jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0xfe -expected-id $_FLASHTAPID @@ -34,7 +33,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xe -expected-id $_ if { [info exists BSTAPID ] } { set _BSTAPID $BSTAPID } else { - set _BSTAPID 0xFFFFFFFF + set _BSTAPID 0x1457f041 } jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1e -expected-id $_BSTAPID @@ -42,9 +41,21 @@ set _TARGETNAME [format "%s.cpu" $_CHIPNAME] target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-virt 0x50000000 -work-area-size 16384 -work-area-backup 1 -flash bank str9xpec 0x00000000 0x00080000 0 0 0 +$_TARGETNAME configure -event reset-init { + # We can increase speed now that we know the target is halted. + #jtag_rclk 3000 + + # -- Enable 96K RAM + # PFQBC enabled / DTCM & AHB wait-states disabled + mww 0x5C002034 0x0191 -str9xpec enable_turbo 0 -str9xpec options_read 0 -str9xpec options_cmap 0 bank 1 -str9xpec options_write 0 + str9x flash_config 0 4 2 0 0x80000 + flash protect 0 0 7 off +} + +#flash bank str9x 0 0 +flash bank str9x 0x00000000 0x00080000 0 0 0 +flash bank str9x 0x00080000 0x00008000 0 0 0 + +# For more information about the configuration files, take a look at: +# openocd.texi diff --git a/src/target/target/str912.cfg b/src/target/target/str912.cfg index 3b7d7ff1..a794d2b4 100644 --- a/src/target/target/str912.cfg +++ b/src/target/target/str912.cfg @@ -12,8 +12,6 @@ if { [info exists ENDIAN] } { set _ENDIAN little } - - # jtag speed. We need to stick to 16kHz until we've finished reset. jtag_rclk 16 @@ -26,7 +24,7 @@ reset_config trst_and_srst if { [info exists FLASHTAPID ] } { set _FLASHTAPID $FLASHTAPID } else { - set _FLASHTAPID 0x25966041 + set _FLASHTAPID 0x04570041 } jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0xfe -expected-id $_FLASHTAPID diff --git a/src/target/target/str9comstick.cfg b/src/target/target/str9comstick.cfg index 0696c121..eebfddfd 100644 --- a/src/target/target/str9comstick.cfg +++ b/src/target/target/str9comstick.cfg @@ -14,7 +14,7 @@ reset_config trst_and_srst if { [info exists FLASHTAPID ] } { set _FLASHTAPID $FLASHTAPID } else { - set _FLASHTAPID 0xFFFFFFFF + set _FLASHTAPID 0x04570041 } jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID @@ -29,7 +29,7 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0xf -irmask 0xe -expected-id $_ if { [info exists BSTAPID ] } { set _BSTAPID $BSTAPID } else { - set _BSTAPID 0xFFFFFFFF + set _BSTAPID 0x1457f041 } jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID -- cgit v1.2.3-18-g5258