From 81d0b769a65bf15dda2fd51cd4aee50bb0dc16fb Mon Sep 17 00:00:00 2001 From: Tomas Vanek Date: Fri, 23 Feb 2018 00:12:50 +0100 Subject: target/cortex_m: allow setting the type of a breakpoint Cortex-M target used 'auto_bp_type' mode. The requested type of breakpoint was ignored and hard (FPB) breakpoints were set in 'code memory area' 0x00000000-0x1fffffff, soft breakpoints were set above 0x20000000. The code memory area of Cortex-M does not mean the memory is flash and vice versa. External flash (parallel or QSPI) is usually mapped above code memory area. Cortex-M7 ITCM RAM is mapped at 0. Kinetis has a RAM block under 0x20000000 boundary. Remove 'auto_bp_type' mode, set breakpoints to requested type. Change 'cortex_m maskisr auto' handling to use a hard temporary breakpoint everywhere: it can also workaround not working soft breakpoints on Cortex-M7 with ICache enabled. Change-Id: I7a9f9464c5e10bfd7f17cba1037ed07a064fa2e8 Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/4429 Tested-by: jenkins Reviewed-by: Matthias Welwarsky --- src/target/cortex_m.c | 29 +---------------------------- 1 file changed, 1 insertion(+), 28 deletions(-) (limited to 'src/target/cortex_m.c') diff --git a/src/target/cortex_m.c b/src/target/cortex_m.c index a356350a..30439f45 100644 --- a/src/target/cortex_m.c +++ b/src/target/cortex_m.c @@ -51,11 +51,6 @@ * any longer. */ -/** - * Returns the type of a break point required by address location - */ -#define BKPT_TYPE_BY_ADDR(addr) ((addr) < 0x20000000 ? BKPT_HARD : BKPT_SOFT) - /* forward declarations */ static int cortex_m_store_core_reg_u32(struct target *target, uint32_t num, uint32_t value); @@ -868,7 +863,7 @@ static int cortex_m_step(struct target *target, int current, if (breakpoint) retval = cortex_m_set_breakpoint(target, breakpoint); else - retval = breakpoint_add(target, pc_value, 2, BKPT_TYPE_BY_ADDR(pc_value)); + retval = breakpoint_add(target, pc_value, 2, BKPT_HARD); bool tmp_bp_set = (retval == ERROR_OK); /* No more breakpoints left, just do a step */ @@ -1131,9 +1126,6 @@ int cortex_m_set_breakpoint(struct target *target, struct breakpoint *breakpoint return ERROR_OK; } - if (cortex_m->auto_bp_type) - breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address); - if (breakpoint->type == BKPT_HARD) { uint32_t fpcr_value; while (comparator_list[fp_num].used && (fp_num < cortex_m->fp_num_code)) @@ -1253,21 +1245,6 @@ int cortex_m_add_breakpoint(struct target *target, struct breakpoint *breakpoint { struct cortex_m_common *cortex_m = target_to_cm(target); - if (cortex_m->auto_bp_type) - breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address); - - if (breakpoint->type != BKPT_TYPE_BY_ADDR(breakpoint->address)) { - if (breakpoint->type == BKPT_HARD) { - LOG_INFO("flash patch comparator requested outside code memory region"); - return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - } - - if (breakpoint->type == BKPT_SOFT) { - LOG_INFO("soft breakpoint requested in code (flash) memory region"); - return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; - } - } - if ((breakpoint->type == BKPT_HARD) && (cortex_m->fp_code_available < 1)) { LOG_INFO("no flash patch comparator unit available for hardware breakpoint"); return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; @@ -1299,9 +1276,6 @@ int cortex_m_remove_breakpoint(struct target *target, struct breakpoint *breakpo return ERROR_TARGET_NOT_HALTED; } - if (cortex_m->auto_bp_type) - breakpoint->type = BKPT_TYPE_BY_ADDR(breakpoint->address); - if (breakpoint->set) cortex_m_unset_breakpoint(target, breakpoint); @@ -2111,7 +2085,6 @@ int cortex_m_examine(struct target *target) /* Setup FPB */ target_read_u32(target, FP_CTRL, &fpcr); - cortex_m->auto_bp_type = 1; /* bits [14:12] and [7:4] */ cortex_m->fp_num_code = ((fpcr >> 8) & 0x70) | ((fpcr >> 4) & 0xF); cortex_m->fp_num_lit = (fpcr >> 8) & 0xF; -- cgit v1.2.3-18-g5258