From a2935397b48ce2a1bbb8e49258b340479e0b9c8e Mon Sep 17 00:00:00 2001
From: Spencer Oliver <spen@spen-soft.co.uk>
Date: Wed, 4 Apr 2012 13:37:09 +0100
Subject: doxygen: remove warnings

Change-Id: I020845a8df7b67f3b6c1a233b3ee07a5d14fa685
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/556
Tested-by: jenkins
---
 src/jtag/drivers/OpenULINK/include/msgtypes.h  | 3 ++-
 src/jtag/drivers/OpenULINK/include/reg_ezusb.h | 3 ++-
 src/jtag/drivers/OpenULINK/src/protocol.c      | 7 +++----
 src/jtag/drivers/OpenULINK/src/usb.c           | 3 ++-
 4 files changed, 9 insertions(+), 7 deletions(-)

(limited to 'src/jtag/drivers')

diff --git a/src/jtag/drivers/OpenULINK/include/msgtypes.h b/src/jtag/drivers/OpenULINK/include/msgtypes.h
index cb356128..18f5a77d 100644
--- a/src/jtag/drivers/OpenULINK/include/msgtypes.h
+++ b/src/jtag/drivers/OpenULINK/include/msgtypes.h
@@ -19,7 +19,8 @@
  ***************************************************************************/
 
 /**
- * @file Definition of the commands supported by the OpenULINK firmware.
+ * @file
+ * Definition of the commands supported by the OpenULINK firmware.
  *
  * Basically, two types of commands can be distinguished:
  *  - Commands with fixed payload size
diff --git a/src/jtag/drivers/OpenULINK/include/reg_ezusb.h b/src/jtag/drivers/OpenULINK/include/reg_ezusb.h
index 3d5c279b..f0c30618 100644
--- a/src/jtag/drivers/OpenULINK/include/reg_ezusb.h
+++ b/src/jtag/drivers/OpenULINK/include/reg_ezusb.h
@@ -22,7 +22,8 @@
 #define REG_EZUSB_H
 
 /**
- * @file All information in this file was taken from the EZ-USB Technical
+ * @file
+ * All information in this file was taken from the EZ-USB Technical
  * Reference Manual, Cypress Semiconductor, 3901 North First Street
  * San Jose, CA 95134 (www.cypress.com).
  *
diff --git a/src/jtag/drivers/OpenULINK/src/protocol.c b/src/jtag/drivers/OpenULINK/src/protocol.c
index 1034c04f..9688fbdd 100644
--- a/src/jtag/drivers/OpenULINK/src/protocol.c
+++ b/src/jtag/drivers/OpenULINK/src/protocol.c
@@ -28,7 +28,8 @@
 #include "reg_ezusb.h"
 
 /**
- * @file Implementation of the OpenULINK communication protocol.
+ * @file
+ * Implementation of the OpenULINK communication protocol.
  *
  * The OpenULINK protocol uses one OUT and one IN endpoint. These two endpoints
  * are configured to use the maximum packet size for full-speed transfers,
@@ -75,11 +76,9 @@ void execute_set_led_command(void)
 /**
  * Executes one command and updates global command indexes.
  *
- * @param index the index of the Bulk EP2-OUT data buffer at which the
- *  command ID is stored.
  * @return true if this command was the last command.
  * @return false if there are more commands within the current contents of the
- *  Bulk EP2-OUT data buffer.
+ * Bulk EP2-OUT data buffer.
  */
 bool execute_command(void)
 {
diff --git a/src/jtag/drivers/OpenULINK/src/usb.c b/src/jtag/drivers/OpenULINK/src/usb.c
index dd791f1b..a8299103 100644
--- a/src/jtag/drivers/OpenULINK/src/usb.c
+++ b/src/jtag/drivers/OpenULINK/src/usb.c
@@ -19,7 +19,8 @@
  ***************************************************************************/
 
 /**
- * @file Defines USB descriptors, interrupt routines and helper functions.
+ * @file
+ * Defines USB descriptors, interrupt routines and helper functions.
  * To minimize code size, we make the following assumptions:
  *  - The OpenULINK has exactly one configuration
  *  - and exactly one alternate setting
-- 
cgit v1.2.3-18-g5258