From 89fa8ce2d8c58707f3dfda397138f8ee336e1a47 Mon Sep 17 00:00:00 2001 From: Spencer Oliver Date: Mon, 4 Jul 2011 11:19:19 +0100 Subject: Revert "cortex_m3: add auto maskisr" This reverts commit ff640f197a9a343b2f3ed10e9174e35282334e8c. Original patch reverted as Author's name was incorrectly set. --- doc/openocd.texi | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) (limited to 'doc/openocd.texi') diff --git a/doc/openocd.texi b/doc/openocd.texi index fd92d51a..892661fd 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -6720,21 +6720,8 @@ If @var{value} is defined, first assigns that. @subsection Cortex-M3 specific commands @cindex Cortex-M3 -@deffn Command {cortex_m3 maskisr} (@option{auto}|@option{on}|@option{off}) +@deffn Command {cortex_m3 maskisr} (@option{on}|@option{off}) Control masking (disabling) interrupts during target step/resume. - -The @option{auto} option handles interrupts during stepping a way they get -served but don't disturb the program flow. The step command first allows -pending interrupt handlers to execute, then disables interrupts and steps over -the next instruction where the core was halted. After the step interrupts -are enabled again. If the interrupt handlers don't complete within 500ms, -the step command leaves with the core running. - -Note that a free breakpoint is required for the @option{auto} option. If no -breakpoint is available at the time of the step, then the step is taken -with interrupts enabled, i.e. the same way the @option{off} option does. - -Default is @option{auto}. @end deffn @deffn Command {cortex_m3 vector_catch} [@option{all}|@option{none}|list] -- cgit v1.2.3-18-g5258