From 6819468a78ce9f0835a9063d93bc839f3d55eb84 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Tue, 10 Feb 2015 13:32:07 +0300 Subject: armv7m_trace, stlink: provide APIs to capture trace with an adapter Change-Id: I9d193dd5af382912e4fe838bd4f612cffd11b295 Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/2540 Tested-by: jenkins --- doc/openocd.texi | 7 ------- 1 file changed, 7 deletions(-) (limited to 'doc/openocd.texi') diff --git a/doc/openocd.texi b/doc/openocd.texi index f00af7fb..cc7f6c82 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -3119,13 +3119,6 @@ The vendor ID and product ID of the device. Execute a custom adapter-specific command. The @var{command} string is passed as is to the underlying adapter layout handler. @end deffn - -@deffn {Config Command} {trace} source_clock_hz [output_file_path] -Enable SWO tracing (if supported). The source clock rate for the -trace port must be specified, this is typically the CPU clock rate. If -the optional output file is specified then raw trace data is appended -to the file, and the file is created if it does not exist. -@end deffn @end deffn @deffn {Interface Driver} {opendous} -- cgit v1.2.3-18-g5258