From 447fb25324f1e9112523ef78825f8dadf3c7ddb7 Mon Sep 17 00:00:00 2001 From: Mahavir Jain Date: Thu, 4 Sep 2014 15:31:16 +0530 Subject: flash/nor: add mrvlqspi flash controller driver This patch adds support for QSPI flash controller driver for Marvell's Wireless Microcontroller platform. For more information please refer, https://origin-www.marvell.com/microcontrollers/wi-fi-microcontroller-platform/ Following things have been tested on 88MC200 (Winbond W25Q80BV flash chip): 1. Flash sector level erase 2. Flash chip erase 3. Flash write in normal SPI mode 4. Flash fill (write and verify) in normal SPI mode Change-Id: If4414ae3f77ff170b84e426a35b66c44590c5e06 Signed-off-by: Mahavir Jain Reviewed-on: http://openocd.zylin.com/2280 Tested-by: jenkins Reviewed-by: Spencer Oliver --- contrib/loaders/flash/mrvlqspi_write.S | 232 +++++++++++++++++++++++++++++++++ 1 file changed, 232 insertions(+) create mode 100644 contrib/loaders/flash/mrvlqspi_write.S (limited to 'contrib') diff --git a/contrib/loaders/flash/mrvlqspi_write.S b/contrib/loaders/flash/mrvlqspi_write.S new file mode 100644 index 00000000..064192c9 --- /dev/null +++ b/contrib/loaders/flash/mrvlqspi_write.S @@ -0,0 +1,232 @@ +/*************************************************************************** + * Copyright (C) 2014 by Mahavir Jain * + * * + * Adapted from (contrib/loaders/flash/lpcspifi_write.S): * + * Copyright (C) 2012 by George Harris * + * george@luminairecoffee.com * + * * + * This program is free software; you can redistribute it and/or modify * + * it under the terms of the GNU General Public License as published by * + * the Free Software Foundation; either version 2 of the License, or * + * (at your option) any later version. * + * * + * This program is distributed in the hope that it will be useful, * + * but WITHOUT ANY WARRANTY; without even the implied warranty of * + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * + * GNU General Public License for more details. * + * * + * You should have received a copy of the GNU General Public License * + * along with this program; if not, write to the * + * Free Software Foundation, Inc., * + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * + ***************************************************************************/ + + .text + .syntax unified + .cpu cortex-m3 + .thumb + .thumb_func + +/* + * For compilation: + * arm-none-eabi-gcc -mcpu=cortex-m3 -mthumb -c contrib/loaders/flash/mrvlqspi_write.S + * arm-none-eabi-objcopy -O binary mrvlqspi_write.o code.bin + * Copy code.bin into mrvlqspi flash driver + */ + +/* + * Params : + * r0 = workarea start, status (out) + * r1 = workarea end + * r2 = target address (offset from flash base) + * r3 = count (bytes) + * r4 = page size + * r5 = qspi base address + * Clobbered: + * r7 - rp + * r8 - wp, tmp + * r9 - send/receive data + * r10 - current page end address + */ + +#define CNTL 0x0 +#define CONF 0x4 +#define DOUT 0x8 +#define DIN 0xc +#define INSTR 0x10 +#define ADDR 0x14 +#define RDMODE 0x18 +#define HDRCNT 0x1c +#define DINCNT 0x20 + +#define SS_EN (1 << 0) +#define XFER_RDY (1 << 1) +#define RFIFO_EMPTY (1 << 4) +#define WFIFO_EMPTY (1 << 6) +#define WFIFO_FULL (1 << 7) +#define FIFO_FLUSH (1 << 9) +#define RW_EN (1 << 13) +#define XFER_STOP (1 << 14) +#define XFER_START (1 << 15) + +#define INS_WRITE_ENABLE 0x06 +#define INS_READ_STATUS 0x05 +#define INS_PAGE_PROGRAM 0x02 + +init: + mov.w r10, #0x00 +find_next_page_boundary: + add r10, r4 /* Increment to the next page */ + cmp r10, r2 + /* If we have not reached the next page boundary after the target address, keep going */ + bls find_next_page_boundary +write_enable: + /* Flush read/write fifo's */ + bl flush_fifo + + /* Instruction byte 1 */ + movs r8, #0x1 + str r8, [r5, #HDRCNT] + + /* Set write enable instruction */ + movs r8, #INS_WRITE_ENABLE + str r8, [r5, #INSTR] + + movs r9, #0x1 + bl start_tx + bl stop_tx +page_program: + /* Instruction byte 1, Addr byte 3 */ + movs r8, #0x31 + str r8, [r5, #HDRCNT] + /* Todo: set addr and data pin to single */ +write_address: + mov r8, r2 + str r8, [r5, #ADDR] + /* Set page program instruction */ + movs r8, #INS_PAGE_PROGRAM + str r8, [r5, #INSTR] + /* Start write transfer */ + movs r9, #0x1 + bl start_tx +wait_fifo: + ldr r8, [r0] /* read the write pointer */ + cmp r8, #0 /* if it's zero, we're gonzo */ + beq exit + ldr r7, [r0, #4] /* read the read pointer */ + cmp r7, r8 /* wait until they are not equal */ + beq wait_fifo +write: + ldrb r9, [r7], #0x01 /* Load one byte from the FIFO, increment the read pointer by 1 */ + bl write_data /* send the byte to the flash chip */ + + cmp r7, r1 /* wrap the read pointer if it is at the end */ + it cs + addcs r7, r0, #8 /* skip loader args */ + str r7, [r0, #4] /* store the new read pointer */ + subs r3, r3, #1 /* decrement count */ + cmp r3, #0 /* Exit if we have written everything */ + beq write_wait + add r2, #1 /* Increment flash address by 1 */ + cmp r10, r2 /* See if we have reached the end of a page */ + bne wait_fifo /* If not, keep writing bytes */ +write_wait: + bl stop_tx /* Otherwise, end the command and keep going w/ the next page */ + add r10, r4 /* Move up the end-of-page address by the page size*/ +check_flash_busy: /* Wait for the flash to finish the previous page write */ + /* Flush read/write fifo's */ + bl flush_fifo + /* Instruction byte 1 */ + movs r8, #0x1 + str r8, [r5, #HDRCNT] + /* Continuous data in of status register */ + movs r8, #0x0 + str r8, [r5, #DINCNT] + /* Set write enable instruction */ + movs r8, #INS_READ_STATUS + str r8, [r5, #INSTR] + /* Start read transfer */ + movs r9, #0x0 + bl start_tx +wait_flash_busy: + bl read_data + and.w r9, r9, #0x1 + cmp r9, #0x0 + bne.n wait_flash_busy + bl stop_tx + cmp r3, #0 + bne.n write_enable /* If it is done, start a new page write */ + b exit /* All data written, exit */ + +write_data: /* Send/receive 1 byte of data over QSPI */ + ldr r8, [r5, #CNTL] + lsls r8, r8, #24 + bmi.n write_data + str r9, [r5, #DOUT] + bx lr + +read_data: /* Read 1 byte of data over QSPI */ + ldr r8, [r5, #CNTL] + lsls r8, r8, #27 + bmi.n read_data + ldr r9, [r5, #DIN] + bx lr + +flush_fifo: /* Flush read write fifos */ + ldr r8, [r5, #CONF] + orr.w r8, r8, #FIFO_FLUSH + str r8, [r5, #CONF] +flush_reset: + ldr r8, [r5, #CONF] + lsls r8, r8, #22 + bmi.n flush_reset + bx lr + +start_tx: + ldr r8, [r5, #CNTL] + orr.w r8, r8, #SS_EN + str r8, [r5, #CNTL] +xfer_rdy: + ldr r8, [r5, #CNTL] + lsls r8, r8, #30 + bpl.n xfer_rdy + ldr r8, [r5, #CONF] + bfi r8, r9, #13, #1 + orr.w r8, r8, #XFER_START + str r8, [r5, #CONF] + bx lr + +stop_tx: + ldr r8, [r5, #CNTL] + lsls r8, r8, #30 + bpl.n stop_tx +wfifo_wait: + ldr r8, [r5, #CNTL] + lsls r8, r8, #25 + bpl.n wfifo_wait + ldr r8, [r5, #CONF] + orr.w r8, r8, #XFER_STOP + str r8, [r5, #CONF] +xfer_start: + ldr r8, [r5, #CONF] + lsls r8, r8, #16 + bmi.n xfer_start +ss_disable: + # Disable SS_EN + ldr r8, [r5, #CNTL] + bic.w r8, r8, #SS_EN + str r8, [r5, #CNTL] +wait: + ldr r8, [r5, #CNTL] + lsls r8, r8, #30 + bpl.n wait + bx lr + +error: + movs r0, #0 + str r0, [r2, #4] /* set rp = 0 on error */ +exit: + mov r0, r6 + bkpt #0x00 + + .end -- cgit v1.2.3-18-g5258