From c989de0cea1dafa22b0a089f2d68a80190f560e1 Mon Sep 17 00:00:00 2001 From: "Rodrigo L. Rosa" Date: Thu, 2 Jun 2011 09:59:18 -0700 Subject: crc check on flashed data --- src/target/dsp5680xx.c | 81 +++++++++++++++++++++++++++++++++++++++++++------- 1 file changed, 71 insertions(+), 10 deletions(-) diff --git a/src/target/dsp5680xx.c b/src/target/dsp5680xx.c index 044fb7ec..9eba3742 100644 --- a/src/target/dsp5680xx.c +++ b/src/target/dsp5680xx.c @@ -716,7 +716,7 @@ static int dsp5680xx_read_32_single(struct target * target, uint32_t address, ui uint16_t tmp; retval = eonce_rx_upper_data(target,&tmp); err_check_propagate(retval); - *data_read = (((*data_read)<<16) | tmp); + *data_read = ((tmp<<16) | (*data_read));//This enables opencd crc to succeed, even though it's very slow. return retval; } @@ -973,7 +973,34 @@ static int dsp5680xx_read_buffer(struct target * target, uint32_t address, uint3 } static int dsp5680xx_checksum_memory(struct target * target, uint32_t address, uint32_t size, uint32_t * checksum){ - return ERROR_FAIL; //this makes openocd do the crc + //TODO implement. + //This will make openocd do the work, but it will fail because of the word/byte addressing issues. + int retval; + struct working_area * crc_algorithm; + retval = target_alloc_working_area(target, 20, &crc_algorithm); + if(retval != ERROR_OK) + return ERROR_TARGET_RESOURCE_NOT_AVAILABLE; + retval = target_free_working_area(target, crc_algorithm); + return ERROR_FAIL; +} + +// Data signature algorithm used by the core FM (flash module) +static int perl_crc(uint16_t * buff16,uint32_t word_count){ + uint16_t checksum = 0xffff; + uint16_t data,fbmisr; + uint32_t i; + for(i=0;i>1 ^ (checksum & 4)>>2 ^ (checksum & 16)>>4 ^ (checksum & 0x8000)>>15; + checksum = (data ^ ((checksum << 1) | fbmisr)); + } + i--; + for(;!(i&0x80000000);i--){ + data = buff16[i]; + fbmisr = (checksum & 2)>>1 ^ (checksum & 4)>>2 ^ (checksum & 16)>>4 ^ (checksum & 0x8000)>>15; + checksum = (data ^ ((checksum << 1) | fbmisr)); + } + return checksum; } int dsp5680xx_f_SIM_reset(struct target * target){ @@ -1025,7 +1052,7 @@ int dsp5680xx_f_protect_check(struct target * target, uint8_t * protected) { return retval; } -static int dsp5680xx_f_execute_command(struct target * target, uint16_t command, uint32_t address, uint16_t * hfm_ustat, int pmem){ +static int dsp5680xx_f_execute_command(struct target * target, uint16_t command, uint32_t address, uint32_t data, uint16_t * hfm_ustat, int pmem){ int retval; retval = eonce_load_TX_RX_high_to_r0(target); err_check_propagate(retval); @@ -1057,6 +1084,8 @@ static int dsp5680xx_f_execute_command(struct target * target, uint16_t command, err_check_propagate(retval); retval = eonce_move_value_at_r2_disp(target,0x00,HFM_PROTB); // write to HMF_PROTB, clear protection err_check_propagate(retval); + retval = eonce_move_value_to_y0(target,data); + err_check_propagate(retval); retval = eonce_move_long_to_r3(target,address); // write to the flash block err_check_propagate(retval); if (pmem){ @@ -1125,6 +1154,23 @@ static int eonce_set_hfmdiv(struct target * target){ return ERROR_OK; } +static int dsp5680xx_f_signature(struct target * target, uint32_t address, uint32_t words, uint16_t * signature){ + int retval; + uint16_t hfm_ustat; + if (dsp5680xx_target_status(target,NULL,NULL) != TARGET_HALTED){ + retval = eonce_enter_debug_mode(target,NULL); + err_check_propagate(retval); + } + retval = dsp5680xx_f_execute_command(target,HFM_CALCULATE_DATA_SIGNATURE,address,words,&hfm_ustat,1); + err_check_propagate(retval); + if (hfm_ustat&HFM_USTAT_MASK_PVIOL_ACCER){ + retval = ERROR_TARGET_FAILURE; + err_check(retval,"HFM exec error:pviol and/or accer bits set."); + } + retval = dsp5680xx_read_16_single(target, HFM_BASE_ADDR|HFM_DATA, signature, 0); + return retval; +} + int dsp5680xx_f_erase_check(struct target * target, uint8_t * erased){ int retval; uint16_t hfm_ustat; @@ -1150,7 +1196,7 @@ int dsp5680xx_f_erase_check(struct target * target, uint8_t * erased){ // Check if chip is already erased. // Since only mass erase is currently implemented, only the first sector is checked (assuming no code will leave it unused) - retval = dsp5680xx_f_execute_command(target,HFM_ERASE_VERIFY,HFM_FLASH_BASE_ADDR+0*HFM_SECTOR_SIZE,&hfm_ustat,1); // blank check + retval = dsp5680xx_f_execute_command(target,HFM_ERASE_VERIFY,HFM_FLASH_BASE_ADDR+0*HFM_SECTOR_SIZE,0,&hfm_ustat,1); // blank check err_check_propagate(retval); if (hfm_ustat&HFM_USTAT_MASK_PVIOL_ACCER){ retval = ERROR_TARGET_FAILURE; @@ -1204,7 +1250,7 @@ int dsp5680xx_f_erase(struct target * target, int first, int last){ // Execute mass erase command. uint16_t hfm_ustat; uint16_t hfm_cmd = HFM_MASS_ERASE; - retval = dsp5680xx_f_execute_command(target,hfm_cmd,HFM_FLASH_BASE_ADDR+0*HFM_SECTOR_SIZE,&hfm_ustat,1); + retval = dsp5680xx_f_execute_command(target,hfm_cmd,HFM_FLASH_BASE_ADDR+0*HFM_SECTOR_SIZE,0,&hfm_ustat,1); err_check_propagate(retval); if (hfm_ustat&HFM_USTAT_MASK_PVIOL_ACCER){ retval = ERROR_TARGET_FAILURE; @@ -1332,11 +1378,12 @@ int dsp5680xx_f_wr(struct target * target, uint8_t *buffer, uint32_t address, ui int counter_reset = FLUSH_COUNT_FLASH; int counter = counter_reset; context.flush = 0; - for(uint32_t i=1; (itap->enabled){ -- cgit v1.2.3-18-g5258