From 89fa8ce2d8c58707f3dfda397138f8ee336e1a47 Mon Sep 17 00:00:00 2001 From: Spencer Oliver Date: Mon, 4 Jul 2011 11:19:19 +0100 Subject: Revert "cortex_m3: add auto maskisr" This reverts commit ff640f197a9a343b2f3ed10e9174e35282334e8c. Original patch reverted as Author's name was incorrectly set. --- doc/openocd.texi | 15 +------ src/target/cortex_m3.c | 120 +++++-------------------------------------------- src/target/cortex_m3.h | 9 ---- 3 files changed, 12 insertions(+), 132 deletions(-) diff --git a/doc/openocd.texi b/doc/openocd.texi index fd92d51a..892661fd 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -6720,21 +6720,8 @@ If @var{value} is defined, first assigns that. @subsection Cortex-M3 specific commands @cindex Cortex-M3 -@deffn Command {cortex_m3 maskisr} (@option{auto}|@option{on}|@option{off}) +@deffn Command {cortex_m3 maskisr} (@option{on}|@option{off}) Control masking (disabling) interrupts during target step/resume. - -The @option{auto} option handles interrupts during stepping a way they get -served but don't disturb the program flow. The step command first allows -pending interrupt handlers to execute, then disables interrupts and steps over -the next instruction where the core was halted. After the step interrupts -are enabled again. If the interrupt handlers don't complete within 500ms, -the step command leaves with the core running. - -Note that a free breakpoint is required for the @option{auto} option. If no -breakpoint is available at the time of the step, then the step is taken -with interrupts enabled, i.e. the same way the @option{off} option does. - -Default is @option{auto}. @end deffn @deffn Command {cortex_m3 vector_catch} [@option{all}|@option{none}|list] diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c index 98a775c3..9c3d2d9d 100644 --- a/src/target/cortex_m3.c +++ b/src/target/cortex_m3.c @@ -39,7 +39,6 @@ #include "register.h" #include "arm_opcodes.h" #include "arm_semihosting.h" -#include /* NOTE: most of this should work fine for the Cortex-M1 and * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M. @@ -859,8 +858,6 @@ static int cortex_m3_step(struct target *target, int current, struct breakpoint *breakpoint = NULL; struct reg *pc = armv7m->arm.pc; bool bkpt_inst_found = false; - int retval; - bool isr_timed_out = false; if (target->state != TARGET_HALTED) { @@ -894,79 +891,11 @@ static int cortex_m3_step(struct target *target, int current, * instruction - as such simulate a step */ if (bkpt_inst_found == false) { - /* Automatic ISR masking mode off: Just step over the next instruction */ - if ((cortex_m3->isrmasking_mode != CORTEX_M3_ISRMASK_AUTO)) - { - cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT); - } - else - { - /* Process interrupts during stepping in a way they don't interfere - * debugging. - * - * Principle: - * - * Set a temporary break point at the current pc and let the core run - * with interrupts enabled. Pending interrupts get served and we run - * into the breakpoint again afterwards. Then we step over the next - * instruction with interrupts disabled. - * - * If the pending interrupts don't complete within time, we leave the - * core running. This may happen if the interrupts trigger faster - * than the core can process them or the handler doesn't return. - * - * If no more breakpoints are available we simply do a step with - * interrupts enabled. - * - */ - - /* Set a temporary break point */ - retval = breakpoint_add(target, pc_value , 2, BKPT_TYPE_BY_ADDR(pc_value)); - bool tmp_bp_set = (retval == ERROR_OK); - - /* No more breakpoints left, just do a step */ - if (!tmp_bp_set) - { - cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT); - } - else - { - /* Start the core */ - LOG_DEBUG("Starting core to serve pending interrupts"); - int64_t t_start = timeval_ms(); - cortex_m3_write_debug_halt_mask(target, 0, C_HALT | C_STEP); - - /* Wait for pending handlers to complete or timeout */ - do { - retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr); - if (retval != ERROR_OK) - { - target->state = TARGET_UNKNOWN; - return retval; - } - isr_timed_out = ((timeval_ms() - t_start) > 500); - } while (!((cortex_m3->dcb_dhcsr & S_HALT) || isr_timed_out)); - - /* Remove the temporary breakpoint */ - breakpoint_remove(target, pc_value); - - if (isr_timed_out) - { - LOG_DEBUG("Interrupt handlers didn't complete within time, " - "leaving target running"); - } - else - { - /* Step over next instruction with interrupts disabled */ - cortex_m3_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0); - cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT); - /* Re-enable interrupts */ - cortex_m3_write_debug_halt_mask(target, C_HALT, C_MASKINTS); - } - } - } + /* set step and clear halt */ + cortex_m3_write_debug_halt_mask(target, C_STEP, C_HALT); } + int retval; retval = mem_ap_read_atomic_u32(swjdp, DCB_DHCSR, &cortex_m3->dcb_dhcsr); if (retval != ERROR_OK) return retval; @@ -977,13 +906,6 @@ static int cortex_m3_step(struct target *target, int current, if (breakpoint) cortex_m3_set_breakpoint(target, breakpoint); - if (isr_timed_out) { - /* Leave the core running. The user has to stop execution manually. */ - target->debug_reason = DBG_REASON_NOTHALTED; - target->state = TARGET_RUNNING; - return ERROR_OK; - } - LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32 " nvic_icsr = 0x%" PRIx32, cortex_m3->dcb_dhcsr, cortex_m3->nvic_icsr); @@ -2182,15 +2104,6 @@ COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command) struct cortex_m3_common *cortex_m3 = target_to_cm3(target); int retval; - static const Jim_Nvp nvp_maskisr_modes[] = { - { .name = "auto", .value = CORTEX_M3_ISRMASK_AUTO }, - { .name = "off" , .value = CORTEX_M3_ISRMASK_OFF }, - { .name = "on" , .value = CORTEX_M3_ISRMASK_ON }, - { .name = NULL , .value = -1 }, - }; - const Jim_Nvp *n; - - retval = cortex_m3_verify_pointer(CMD_CTX, cortex_m3); if (retval != ERROR_OK) return retval; @@ -2203,26 +2116,15 @@ COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command) if (CMD_ARGC > 0) { - n = Jim_Nvp_name2value_simple(nvp_maskisr_modes, CMD_ARGV[0]); - if (n->name == NULL) - { - return ERROR_COMMAND_SYNTAX_ERROR; - } - cortex_m3->isrmasking_mode = n->value; - - - if(cortex_m3->isrmasking_mode == CORTEX_M3_ISRMASK_ON) - { - cortex_m3_write_debug_halt_mask(target, C_HALT | C_MASKINTS, 0); - } - else - { - cortex_m3_write_debug_halt_mask(target, C_HALT, C_MASKINTS); - } + bool enable; + COMMAND_PARSE_ON_OFF(CMD_ARGV[0], enable); + uint32_t mask_on = C_HALT | (enable ? C_MASKINTS : 0); + uint32_t mask_off = enable ? 0 : C_MASKINTS; + cortex_m3_write_debug_halt_mask(target, mask_on, mask_off); } - n = Jim_Nvp_value2name_simple(nvp_maskisr_modes, cortex_m3->isrmasking_mode); - command_print(CMD_CTX, "cortex_m3 interrupt mask %s", n->name); + command_print(CMD_CTX, "cortex_m3 interrupt mask %s", + (cortex_m3->dcb_dhcsr & C_MASKINTS) ? "on" : "off"); return ERROR_OK; } @@ -2272,7 +2174,7 @@ static const struct command_registration cortex_m3_exec_command_handlers[] = { .handler = handle_cortex_m3_mask_interrupts_command, .mode = COMMAND_EXEC, .help = "mask cortex_m3 interrupts", - .usage = "['auto'|'on'|'off']", + .usage = "['on'|'off']", }, { .name = "vector_catch", diff --git a/src/target/cortex_m3.h b/src/target/cortex_m3.h index e16aa89f..e1f8ef80 100644 --- a/src/target/cortex_m3.h +++ b/src/target/cortex_m3.h @@ -140,13 +140,6 @@ enum cortex_m3_soft_reset_config CORTEX_M3_RESET_VECTRESET, }; -enum cortex_m3_isrmasking_mode -{ - CORTEX_M3_ISRMASK_AUTO, - CORTEX_M3_ISRMASK_OFF, - CORTEX_M3_ISRMASK_ON, -}; - struct cortex_m3_common { int common_magic; @@ -173,8 +166,6 @@ struct cortex_m3_common enum cortex_m3_soft_reset_config soft_reset_config; - enum cortex_m3_isrmasking_mode isrmasking_mode; - struct armv7m_common armv7m; }; -- cgit v1.2.3-18-g5258