From 390c9aca1f9400d956020b3d1657237bcc1ffe68 Mon Sep 17 00:00:00 2001 From: Tomas Vanek Date: Sat, 7 Jan 2017 17:04:30 +0100 Subject: tcl at91samdXX.cfg: partially revert change 3722 Commit 25d7ba19c9e70cf5b912f660cf6aaa93d9ca120f introduced a problem with 'reset halt' due to setting srst_pulls_trst: Error: cortex_m.c:595 cortex_m_halt(): can't request a halt while in reset if nSRST pulls nTRST Sorry, I don't know why I overlooked it when I tested #3722. Change-Id: I41e9473dd91a86d93cf3e78b1fbbdfe1dd188d83 Reported-by: Ladislav Laska Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/3942 Tested-by: jenkins Reviewed-by: Andreas Fritiofson --- tcl/target/at91samdXX.cfg | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tcl/target/at91samdXX.cfg b/tcl/target/at91samdXX.cfg index 9a3c2928..93a95c8e 100644 --- a/tcl/target/at91samdXX.cfg +++ b/tcl/target/at91samdXX.cfg @@ -50,7 +50,8 @@ $_TARGETNAME configure -event reset-deassert-post { } # SRST (wired to RESET_N) resets debug circuitry -reset_config srst_gates_jtag srst_pulls_trst +# srst_pulls_trst is not configured here to avoid an error raised in reset halt +reset_config srst_gates_jtag # Do not use a reset button with other SWD adapter than Atmel's EDBG. # DSU usually locks MCU in reset state until you issue a reset command -- cgit v1.2.3-18-g5258