aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2014-01-09cfg: add stm32 cmsis-dap compliant configSpencer Oliver
Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1543 Tested-by: jenkins
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2014-01-08tcl/netgear-dg834v3.cfg: add to easy firmware recovery listPaul Fertser
Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1851 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tools: add firmware recovery helpersPaul Fertser
This adds a set of helper functions with the aim to make it possible to flash mass-market devices without RTFMing altogether (i.e. to obsolete GPL-violating proprietary tjtag and other similar software). Real-life tested on an RT-N16 and WRT54GL. Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl/board: add Linksys WRT54GL v1.1 board configPaul Fertser
Tested flashing a real v1.1 device. Change-Id: Ie0d202b9fded8b92e731d93e0ef17be415a75fc8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1852 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl: add bcm47xx config and Asus RT-N16 board using itPaul Fertser
This adds the bcm47xx config with the special undocumented trick to put it into standard EJTAG mode from the mystic "LV mode". The RAM setup is not done as it would require considerable efforts without much practical gain. The only issue I noticed so far is that "reset" doesn't actually reset the chip. Unfortunately, it's unclear how to make it work properly with SRST as OpenOCD asserts it in MIPS-specific code so the device will enter LV mode again but the LV tap is already disabled by that time, so it's not possible to send the magic command again. Anyway, this config is more than enough to "recover" any RT-N16 provided the hardware is not damaged. Change-Id: I0894e339763e6d20d1c93341c597382b479d039b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1849 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Update URLs and names in amdm37x.cfg, no functional changes.Robert P. J. Day
* openocd.berlios.de -> openocd.sourceforge.net * Update link to AM/DM37x Technical Reference Manual (ver R) * "ICEpick" is properly spelled "ICEPick" according to TI Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1856 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-31jtag_vpi: make the server address configurableFranck Jullien
Change-Id: I58e89c789b79ffb0b54ef94d208be876c271ddf7 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1840 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22target/imx6: Fix typo in setting _SJC_TAPID from SJC_TAPID variableAlex Murray
The set command was missing the $ prefix on the SJC_TAPID variable and so would fail if SJC_TAPID was set Change-Id: Ib9af58f5188bd8a2bc3f888309f203d624476c27 Signed-off-by: Alex Murray <alex.murray@cohdawireless.com> Reviewed-on: http://openocd.zylin.com/1811 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-19target: add kl25z HLA (stlink) configPaul Fertser
Based on Nemuisan Tokusei's. Untested, but original config was reported to work ok. Change-Id: Ic991dce55bfca266880081fe2bbd9e6e263b0fc0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1803 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17at91sam7sx.cfg: fix use $_TARGETNAME as target identifier, not '0' warningSergey A. Borshch
all other at91 cfg files already has this fix. It also fix "No flash at address 0x...." error when JTAG chain consist of more than one at91sam7sx cores during attempt to flash other than first mcu in chain. Change-Id: I7785d9103d0fc494b6a823e2c73f850373ffe112 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on: http://openocd.zylin.com/1812 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17cfg: Add new BSTAPID for STM32F42xxx and STM32F43xxx seriesNemui Trinomius
STM32F42xxx & STM32F43xxx series boudary scan TAP-ID are differ from STM32F405xx/07xx & STM32F415xx/17xx. And Section number was also fixed for RM0090 rev5. Tested on a STM32F427IIT6 and STM32F429ZIT6. Change-Id: Ie9c54c55b97b9c396ace752d94ea2ad916cc8479 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1808 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14tcl/target: add config for Milandr's 1986ве1т controllerPaul Fertser
This is a Cortex-M1 controller targetting aviation appliances. Contributed (and live-tested) by 8daemon. Change-Id: I133d6122cf6492b51ddbdbd800c16ba121d51bf3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1818 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14ftdi/neodb.cfg: mark as testedPaul Fertser
Working against openmoko gta02 target, including TRST and SRST (the stupid samsung chip fully resets under trst, so it's actually of little use here). Change-Id: I831124659fc12efbccef536f07d15509c2112f92 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1814 Tested-by: jenkins Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14topic: Support for the Xilinx BSCAN_* Virtual JTAG in OpenriscSergio Chico
This add support to the Xilinx BSCAN_* virtual JTAG interface. This is the Xilinx equivalent of the Altera sld_virtual_jtag interface, it allows a user to connect to the debug unit through the main FPGA JTAG connection. Change-Id: Ia438e910650cff9cbc8f810b719fc1d5de5a8188 Signed-off-by: Sergio Chico <sergio.chico@gmail.com> Reviewed-on: http://openocd.zylin.com/1806 Tested-by: jenkins Reviewed-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14stm32lx_dual_bank.cfg: fix typo in file pathAndrey Yurovsky
s/stm32l1x/stm32lx ...this makes tm32lx_dual_bank.cfg work again. Change-Id: I04dc617523caa6b46c675fe9b700d1bbe88170e6 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1832 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06add TI TMS570 support scriptsAndrey Yurovsky
Add support for the TMS570 Cortex-R4 MCU from TI and their USB stick development kit, TMDX570LS31USB. Tested attaching, reset/halt/run, and reading and writing memory and registers. Change-Id: I12d779cef0c2b834f9bcf722307f35677cc4bd8f Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1788 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31ftdi/tumpa.cfg: enable proper output buffer control, add another USB IDPaul Fertser
The schematics used for writing the config file were incorrect, real hardware needs ACBUS3 _low_ as it's connected directly to the output buffer's !OE pin. Also apparently sometimes TUMPA comes with default FTDI IDs. Real-life tested (including TRST and SRST) with a custom stm32f103 board, thanks to Mike Wang for the adapter sample. Change-Id: Iab566e6d14f8392030f6ff2c8d976e1b57cf5ce6 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1789 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29tcl: add memory testing functions for board diagnosticsPaul Fertser
This is a tcl implementation of public domain tests by Michael Barr, http://www.barrgroup.com/Embedded-Systems/How-To/Memory-Test-Suite-C The initial porting is done by Shane Volpe and posted to the mailing list: http://www.mail-archive.com/openocd-development@lists.berlios.de/msg16676.html This patch includes some cosmetic amendments plus hardcodes 32bit word size (as the code depends on memread32/memwrite32 anyway) which fixes original code's issue of testing only the first quarter of the specified nBytes. Change-Id: I5f3a66f1f16fc4082c7a5a6aba338430646ed21c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1455 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-29Remove jtag_rclk from target configsPaul Fertser
Some boards might have RCLK omitted from the JTAG connector and if the interface claims support for it, OpenOCD will end up trying to use RCLK while it's actually impossible. This is a "cd tcl/target; sed -i s/jtag_rclk/adapter_khz/g *" patch. Change-Id: Iee7337107bc1457966b104389ba9db75a9c860b4 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1695 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-21armada370: initial support for Marvell Armada 370 familyGreg Ungerer
Initial support for using the jtag interface to the Marvell Armada 370 family of SoCs. Change-Id: Id823a567e8805ac622c3c330bc111297c1dae37e Signed-off-by: Greg Ungerer <gerg@uclinux.org> Reviewed-on: http://openocd.zylin.com/1690 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-15cfg: add STM32F429 discovery board configSpencer Oliver
Change-Id: I4ee7a8185a02fac9d1f6079ab34d6a9f7047193a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1691 Tested-by: jenkins
2013-10-03board: add TM4C123G LaunchPad configPaul Fertser
Almost the same as the LM4F120 LaunchPad but the chip is using the new naming scheme (Tiva C series), supports USB OTG and has some new PWM hardware blocks. Change-Id: I6a7b2df76768766471f366cddaf64df3cc63f5f2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1647 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-26Add new target type: OpenRISCFranck Jullien
Add support for OpenRISC target. This implementation supports the adv_debug_sys debug unit core. The mohor dbg_if is not supported. Support for mohor TAP core and Altera Virtual JTAG core are also provided. Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1547 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-08jtag: drivers: Add JTAP VPI client driverFranck Jullien
This patch adds a driver for the jtag_vpi server [1]. This server is now part of the ORPSoC version 3 (OpenRISC Reference Platform SoC). The jtag_vpi server provides an interface between OpenOCD and a simulated core. [1] http://github.com/fjullien/jtag_vpi Change-Id: I717b72cace4845f66c878581345074f99002e21a Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-29cfg: EFM32 supports SYSRESETREQ so use itSpencer Oliver
Change-Id: If52fdea025a2f9620ad4ddacfb83cbb83a94944d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1541 Tested-by: jenkins
2013-08-29efm32: set safe minimum working areaSpencer Oliver
The smallest available RAM size for this family is 2K, set this as the default. Issue reported by quitte on IRC. Change-Id: I3318f7f268f7681ffe2cddab61820f4b94c4e5fd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1559 Tested-by: jenkins
2013-08-29Added new ftdi interface devicePushpal Sidhu
Added new configuration file for gw16042 device. Also added this to interface/ftdi examples in documentation. Change-Id: I07bb10bfc79a5d13007288cd57f254d889075214 Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Reviewed-on: http://openocd.zylin.com/1563 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15interface/ftdi/tumpa: remove ftdi_device_desc as it's incorrectPaul Fertser
The end users on IRC report that actual USB device has different information in its descriptor so it doesn't match. Remove it altogether. Change-Id: Id7841667390a514581e630e67b9283675803135b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1548 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15Add tcl configurations for Altera Soc devicesBrad Riensche
This commit adds two tcl configuration files, one for the Altera Cyclone V SoC series, and one for the SoCkit development board. The board configuration is able to halt and resume the cpu cores, and dump register contents etc. It has not been fully tested, however. Change-Id: Id3f18c3408975cf986a5f5aec410b5b13240c35e Signed-off-by: Brad Riensche <brad.riensche@gmail.com> Reviewed-on: http://openocd.zylin.com/1494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-09remove the untested warning in ftdi/olimex-arm-usb-tiny-h.cfgSergey Alirzaev
the dongle seems working, including srst signal Change-Id: I5da9046bd8a35d8d826f1b663c01bd2600a6cf14 Signed-off-by: Sergey Alirzaev <zl29ah@gmail.com> Reviewed-on: http://openocd.zylin.com/1545 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07mdr32fx: support for Milandr's MDR32Fx internal flash memoryPaul Fertser
This adds example config and flash driver for russian Cortex-M3 microcontroller model. Run-time tested on MDR32F9Q2I evaluation board; the flash driver should be compatible with MDR32F2x (Cortex-M0) too but I lack hardware to test. There're no status bits at all, the datasheets specifies some delays for flash operations instead. All being in <100us range, they're hard to violate with JTAG, I hope. There're also no flash identification registers so the flash size and type has to be hardcoded into the config. The flashing is considerably complicated because the flash is split into pages, and each page consists of 4 interleaved non-consecutive "sectors" (on MDR32F9 only, MDR32F2 is single-sectored), so the fastest way is to latch the page and sector address and then write only the part that should go into the current page and current sector. Performance testing results with adapter_khz 1000 and the chip running on its default HSI 8MHz oscillator: When working area is specified, a target helper algorithm is used: wrote 131072 bytes from file testfile.bin in 3.698427s (34.609 KiB/s) This can theoretically be sped up by ~1.4 times if the helper algorithm is fed some kind of "loader instructions stream" to allow sector-by-sector writing. Pure JTAG implementation (when target memory area is not available) flashes all the 128k memory in 49.5s. Flashing "info" memory region is also implemented, but due to the overlapping memory addresses (resulting in incorrect memory map calculations for GDB) it can't be used at the same time, so OpenOCD needs to be started this way: -c "set IMEMORY true" -f target/mdr32f9q2i.cfg It also can't be read/verified because it's not memory-mapped anywhere ever, and OpenOCD NOR framework doesn't really allow to provide a custom handler that would be used when verifying. Change-Id: I80c0632da686d49856fdbf9e05d908846dd44316 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1532 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-01imx6: add new id for SJC as found on i.MX6DPaul Fertser
Austriancoder on IRC reports getting this ID on his board. Change-Id: Ie859f0ee422e18fdb94bf817cdd2b41d15b968da Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1533 Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15ftdi/board: Add support for DENX M53EVKMarek Vasut
Add support for DENX M53EVK board and it's integrated on-board JTAG adapter using FT2232H. Change-Id: I022dcafa7799bb84a7873ba67ed82f1e49094320 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/1461 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-15target: Pull out the jtag_rtck from iMX5x filesMarek Vasut
Pull the jtag_rtck setting from imx51.cfg and imx53.cfg . Since not all boards using these CPUs do support RTCK signal, move the configuration of RTCK into board files. Change-Id: I632c5d38e00ada8779a451cd26428fd122452001 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/1460 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-09ftdi/xds100v2.cfg: Remove the warning as it has been testedLaszlo Papp
Change-Id: I3a8711867e247bc49caa79274ae882f07719d4ce Signed-off-by: Laszlo Papp <lpapp@kde.org> Reviewed-on: http://openocd.zylin.com/1492 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-07-08cfg: Update Flyswatter 2 URLAndreas Fritiofson
It pointed to the Flyswatter 1 page. Change-Id: Ib7e82669a31cad2bf8f6ba4a60b25ef9920b2584 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1478 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-07Fix a typo.John Szakmeister
Change-Id: I3c8ab03932d8769c1cf0c0ccf84cd150c5eb82d8 Signed-off-by: John Szakmeister <john@szakmeister.net> Reviewed-on: http://openocd.zylin.com/1481 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-12stm32w: add STM32w108xx generic configurationGiuseppe Barba
Add generic TCL configuration for STM STM108Wxx chips. Change-Id: I981cdccb78833f442c3be4188c8c023064067e4e Signed-off-by: Giuseppe Barba <giuseppe.barba@gmail.com> Reviewed-on: http://openocd.zylin.com/1439 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12str9: ignore boundary scan versionSpencer Oliver
Ignore version of Boundary Scan TAP in newer revisions of the str9. Change-Id: I6e205f8c731f07078c469e686025857c180f3a6d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1436 Tested-by: jenkins
2013-06-12ftdi: config for TUMPAPaul Fertser
Add a config file for TIAO USB Multi-Protocol Adapter. Based on schematics from http://www.mediafire.com/?zv158nnx1gv0cy2 Cc: Volkan K <volkan-k@users.sourceforge.net> Change-Id: I0dfd93b0b1e558e4ccd7c94c005c099947ec94df Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1438 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-10Add BCM2835 (as found in Raspberry Pi) interface driverPaul Fertser
This adds support for JTAG programming by bitbanging GPIOs exposed on the RaspberryPi's expansion header. Tested by connecting directly to an STM32VLDiscovery board, without any additional circuity. I observed maximum about 4MHz on the TCK pin with an old analogue 'scope and about 100kHz when setting the speed to 100kHz. Busyloop waiting is needed because even with a single 0ns nanosleep call (with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low to be useful. The speed testing with adapter_khz 2000 gave the following results: sudo chrt -f 1 nice -n -19 ./src/openocd \ -f interface/raspberrypi-native.cfg \ -c "set WORKAREASIZE 0x2000" \ -f target/stm32f1x.cfg -c "adapter_khz 2000" wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s) dumped 131072 bytes in 1.445699s (88.538 KiB/s) This is 3.7 times faster for writing and 14.3 times faster for reading compared to the generic sysfsgpio driver; probably the writing speed is limited by the target itself here and reading speed might be considerably higher too with appropriate connection and a capable target. BCM2835 name is choosen over BCM2708 because the published peripherals datasheet uses the particular model name and not family name. Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/758 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05Added OpenJTAG DriverRyan Corbin
Updated OpenJTAG driver from www.openjtag.org to work with latest version of OpenOCD. Change-Id: I2917f4e5835fb9ca5265e81dc38515fa97ae9503 Signed-off-by: Ryan Corbin <corbin.ryan@gmail.com> Reviewed-on: http://openocd.zylin.com/1406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05nds32: add new target type nds32_v2, nds32_v3, nds32_v3mHsiangkai Wang
Add target code for Andes targets. Change-Id: Ibf0e1b61b06127ca7d9ed502d98d7e2aeebbbe82 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1259 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05aice: add Andes AICE supportHsiangkai Wang
Andes AICE uses USB to transfer packets between OpenOCD and AICE. It uses high-level USB commands to control targets instead of using JTAG signals. I define an interface as aice_port_api_s. It contains all basic operations needed by target-dependent code. Change-Id: I117bc4f938fab2732e44c509ea68b30172d6fdb9 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1256 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-29interface/ftdi: remove "untested" warning from DP BusblasterPaul Fertser
This is reported as working by mitsakos on IRC. Change-Id: I26b97779c3e8e237c5b3996aa81183031b12ec0c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1419 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-28targets: fix target_type name for Cortex-A targetsPaul Fertser
Commit d9ba56c295f057e716519a798bf9cdb4898c24f4 did a bunch of renaming of cortex_a8 to cortex_a, including the names in config files. However that introduced a regression as the name in target_type struct remained unchanged. This adds the last missing bit: actual renaming of the target name as understood by OpenOCD. Also change the (hopefully) last instance of using it in the supplied config files, namely from imx6.cfg. Change-Id: Ib9289fc6d946630133ec6e36c20015ccb50acf61 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1420 Tested-by: jenkins Reviewed-by: Chris Johns <chrisj@rtems.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10stm32 configs: use 4kB working area size by defaultPaul Fertser
This is needed for configs that might be used with the cheapest STM32F100 parts that have only 4kB SRAM. Restrictions for the other STM32 families are verified to be set appropriately. Change-Id: I1ad2370435015604db9f27c1a76c153480311a28 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1378 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-02cfg: remove whitespaceSpencer Oliver
Change-Id: I20edbb50efc03711195102f4c6dc8bcfaf043d44 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1374 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-05-02cfg: ignore ICEPick jrc tap versionSpencer Oliver
Due to reports of newer targets using a updated version of the ICEPick tap rather than add another tapid we ignore the tap version. Also see Trac 49 for details. Change-Id: Ic78414c54af2545c817e1bb2c860970c1b587259 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1373 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 04:35:30 +0000