aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2012-12-30cfg: increase stm32l-discovery working areaSpencer Oliver
This part has 16k ram so make it all available. Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1006 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30cfg: stm32l use minimum family ram size for working areaSpencer Oliver
The smallest pert in the family has 10k RAM, so use that as a default for the working area. Change-Id: I78be0d14a254c109ac15a7163552c6132f810416 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1005 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30cfg: enable stlink stm32l HSISpencer Oliver
Switch to using the internal HSI when a reset init is called, this also matches the std stm32l cfg. Read (verify) speed is increased from 17 to 120 KiB/s. Change-Id: Ic94ba85949ffdefa17b7be45eef14e30f941d107 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1004 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-23icdi: add TI icdi interfaceSpencer Oliver
This is the new proprietary interface replacing the older FTDI based adapters. It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad. Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/922 Tested-by: jenkins
2012-12-23stlink: rename stlink cmd namesSpencer Oliver
As part of the switch to using the hla for the stlink interface we rename the cmds to a more generic name. Update scripts to match new names. Also add handlers for deprecated names. Change-Id: I6f00743da746e3aa13ce06acfdc93c8049545e07 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/921 Tested-by: jenkins
2012-12-23stlink: use common layoutSpencer Oliver
Even though the stlinkv1 and stlinkv2 use different usb classes they share the same layout scheme. Merge the two into a common layout, thus enabling us to support other adapter layouts. Change-Id: I7d02c44a7f94ebc7f2cb5428b02ee40294fb430d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/918 Tested-by: jenkins
2012-12-11LPC1788 target configuration file.is2t
Change-Id: I68bd6b7c19d9d1bee13d0921c32b4490e68ab8f2 Signed-off-by: is2t <devel@is2t.com> Reviewed-on: http://openocd.zylin.com/1002 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-11-16Pic32mx.cfg: Change system clock to 8Mhz after reset-init.Salvador Arroyo
As for openocd 0.6.0-rc2 the function mips32_pracc_fastdata_xfer() should now work at a scan frequency up to 1200Khz. Mainly usefull to increase programming speed. Also verify_image should be slightly faster. Change-Id: I1e9b2be73690a4597e2f6ba069c1205026850f07 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/805 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06Added support for NXP LPC1850 MicrocontrollerGianluca Renzi
Added a new configuration file for LPC18xx based boards, such as HitexLPC1850RevA Evaluation Board, and all other based on the same microcontroller by NXP. Change-Id: I68c3827be535b6d09a5c70b6d57191937d00354d Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it> Reviewed-on: http://openocd.zylin.com/930 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06Generic LPC1850 board w/ SPIFI flash.Gianluca Renzi
This config file is intended as an example of how to use the lpcspifi flash driver, but it should be functional for most LPC1850 boards utilizing SPIFI flash. Change-Id: I855854282336701fd210134497ce014017f3aaec Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it> Reviewed-on: http://openocd.zylin.com/929 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-28ftdi/flyswatter2.cfg: Define the LED signalPeter Stuge
Change-Id: Ic5d85c0d855bcffba54de7df6cff4d726656af97 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/940 Tested-by: jenkins
2012-10-28ftdi/flyswatter2.cfg: Fix the signal layoutPeter Stuge
Change-Id: If6612af25fa3562f49e9c8ccff01b6ef0af5ceb0 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/938 Tested-by: jenkins
2012-10-02lpc1768-stick: avoid driving srst high at startupSpencer Oliver
this avoid driving nSRST high after startup, by making sure the nOE is initialized inactive/high. This also matches the config used for the STM32-PerformanceStick. Change-Id: I9376de575b7dc834310d57dbd58575d51f60183e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/878 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: cortino tested and workingSpencer Oliver
Change-Id: I13534742c76ebbb05b47bf98768c997068da747a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/851 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect cortino reset configSpencer Oliver
The cortino uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I28f6781bccae24de79aa6a03161f298a14fe2581 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/850 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: ftdi icdi enable srst open drain configSpencer Oliver
Change-Id: I21a115121f167dc88cd9bf2d1ca1ac9f3e1110d7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/848 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: update ti/stellaris url'sSpencer Oliver
Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/879 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: lm3s811ek config tested and workingSpencer Oliver
Change-Id: I5402b5521d6e1ef0a569f5cad02c003681f5444b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/847 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect stm32-performance stick configSpencer Oliver
This hardware uses a output enable buffer that was not correctly defined. Fixes issues when using the new ftdi driver. Change-Id: Iba6235a71a6d3c7d16ab729f858b336a4574dfea Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/844 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: stm32-performance stick config tested and workingSpencer Oliver
Change-Id: I9852d11e369e501af240a2b8e9f74306aee4e4a0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/845 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add ti ek-lm3s9d92 configSpencer Oliver
Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/853 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add ti ek-lm3s8962 configSpencer Oliver
Change-Id: I753cec80a904130088b00b3f81b6dd61808662d6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/852 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: str9-comstick tested and workingSpencer Oliver
Change-Id: Ia6c45477381e78cb9508b4731438161e18be1f38 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/843 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add STM32F3-DISCOVERY board supportSpencer Oliver
Change-Id: I4a02e0504fc04ffc1238d9bb77ec05c1f781e7e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/810 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: fix incorrect str9-comstick reset configSpencer Oliver
The str9-comstick uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I0968e8459997a6a2b7bf0c46e89662cd57b4f496 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/842 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect stm32f3 TAPIDSpencer Oliver
Change-Id: Id66d4e03a77c47a49086ee753bed01b3944064e1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/855 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26Added SPIFI flash driver, algorithms, and docsGeorge Harris
Added a flash driver designed to allow program/erase of memory-mapped SPI flash chips for LPC43xx/LPC18xx family micros. This driver includes three algorithms - erase, write, and SPIFI peripheral initialization (to allow memory-mapped access after a reset). The driver has been added to the flash driver table (drivers.c), and the OpenOCD documentation has been updated to include the flash driver configuration command. Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514 Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/783 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26drivers: new jtag bitbang driver using sysfs gpioMarc Reilly
This driver implements a bitbang jtag interface using gpio lines exported via sysfs. The aim of this driver implementation is to use system GPIOs but to avoid the need for an additional kernel driver. A config suitable for RaspberryPi is included. Change-Id: Ib2acf720247a219768d1cbfeebd88057ed2d7b8b Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Reviewed-on: http://openocd.zylin.com/762 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Add JTAG-lock-pick Tiny 2 config filesFreddie Chopin
DISTORTEC's JTAG-lock-pick Tiny 2 is a new interface using FT232HL chip and layout similar to KT-LINK. Change-Id: I2831b169cd448ca70397f2dd86c5b749dda3dabf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/787 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-29cfg: update for target's that support cortex_m AIRCR SYSRESETREQSpencer Oliver
If the target supports SYSRESETREQ make sure we use that as the default if srst is not fitted/configured. Change-Id: I24c907493134506320e69c1218702930629c1cdc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/792 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24ftdi: Olimex ARM-USB-TINY validatedAurelien Jacobs
Flashing a CFI flash and debugging with gdb work fine. Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7 Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/770 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-14cfg: remove duplicate Olimex ARM-USB-OCD configSpencer Oliver
This file is already included as olimex-arm-usb-ocd.cfg. Change-Id: I0e66977c58e74ac93a0dc3a0c88a5e5af4992f8b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/780 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-09cfg: added new openocd-usb highspeed adapterAndrew Karpow
The embedded projects shop released a new highspeed version of the openocd-usb adapter. These configuration files adds support for it. Change-Id: I9b23d7889f998712b9041af101e3f0b9aba85b28 Signed-off-by: Andrew Karpow <notandyk@gmail.com> Reviewed-on: http://openocd.zylin.com/771 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-01added target configs for the lpc17xx devicesVandra Akos
lpc1751, lpc1752, lpc1754, lpc1756, lpc1758, lpc1759 lpc1763, lpc1764, lpc1765, lpc1766, lpc1767, lpc1768, lpc1769 Change-Id: I740b66930cd379c9390f3c1031cdbada747a6ce4 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/676 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-08-01cfg: Add Hitex LPC1768-Stick using ftdi driverJoerg Fischer
Add cfg files for Hitex LPC1768 Stick Website: http://www.hitex.com/?id=1602 This board has a FTDI2232D as JTAG interface, using the same layout as the Hitex STM32-PerformanceStick but with different USB PID. Main MCU is a LPC1768 from NXP. The interface config uses the ftdi driver instead of ft2232. The corresponding ft2232 layout would be "stm32stick". Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7 Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/763 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 4 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/750 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 3 - files that are currently untested but verified with schematics Change-Id: Ia00c3b6437bffcfa0d178e779926ad9309e289fe Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/755 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 2 - files that are currently untested but assumed to work, as other configs using the same layout work fine Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/754 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 1 - files that were tested an verified as working fine Change-Id: If5986853a1cf118a9eb3b4c13b036d0f71c39624 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/534 Tested-by: jenkins
2012-07-30lpc1768.cfg abstracted and moved to lpc17xx.cfgVandra Akos
- Moved variant-independent code to lpc17xx.cfg, which will be included from lpc17??.cfg files automatically. - lpc1768.cfg filled with variant-dependent code. Change-Id: I7dabe6ed7da7be640ed38c13aaaa096b8796d9a0 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/675 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30cfg: remove deprecated stm32 target configsAndreas Fritiofson
These were deprecated in commit 69ac20a. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Change-Id: I047872f8cd61b42aaca6588ab75566219e4a3f5d Reviewed-on: http://openocd.zylin.com/741 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-19board: Add TI AM335x Evaluation ModuleTom Rini
This patch adds the TI AM335x Evaluation Module (ti_am335xevm) board configuration file. Change-Id: Id3529e54972f8acd8c790ad55c8d0f4058a1a1f6 Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/753 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-17Add config file for Lattice LC4032ZE CPLD (ispMACH 4000ZE family)Freddie Chopin
Change-Id: Iefec12b30ff737317c454b472200fd7e7edde619 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/748 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-11flash: add stm32f3x supportSpencer Oliver
add support for the new stm32f3x family from stmicro: http://www.st.com/stm32f3 Change-Id: Icd1db95bb2767d9c0ecef24deefa92b4fdaa4f14 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/735 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-06-26kinetis: update support for all program flash granularitiesChristopher Kilgour
Updates the Kinetis NOR flash support to handle all known block and sector sizes. Previously only 2kiB sectors were hard-coded, now all four known combinations non-volatile sector sizes are supported. The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is also introduced. This means each "block" of flash (in Freescale terms) is treated as a bank in OpenOCD. Correspondingly, the existing board configuration for the TWR-K60M512 eval system is updated to recognize two banks instead of one. A board config for the TWR-K60F120M is also added. Bank and sector erase and programming has been checked with both of the mentioned eval boards. Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/663 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26lpc1768.cfg pulled out constants from flash init as variablesVandra Akos
Seems like an esthetic change, but it will allow easy support for other lpc17xx devices. Change-Id: I2cb953ce1afdd82f6ca65b38d5557a28416f895e Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/674 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25board: Add Sony Ericsson J100I PhoneMathias K
This patch add the Sony Ericsson J100I Phone to the board configurations. Change-Id: I083ddf067c8ecdfdda0404fe9e9df980dbb86fe8 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/631 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25config: Add TI Calypso CPU configurationMathias K
This patch add the TI Calypso CPU to the configuration files. Change-Id: Ieb462960391c4a2c630d7a83699c3b6e8162ace9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/630 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-21target: remove legacy target eventsSpencer Oliver
These events have been deprecated for a number of years, update any remaining scripts to the new events. Change-Id: Ic31ff388545ac8b3a500045699ca92c541b13f12 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/634 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-14jtag: add opendous and estick supportSpencer Oliver
Change-Id: I49c25d226f05fdcaca6cbfc35c2ab47e8464abec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/611 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 19:43:40 +0000