aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2011-11-21TCL/SPEAr: move device generic codeAntonio Borneo
The initialization of RAS enable and clock is required by all SPEAr3xx devices Change-Id: Iea4cd0902e4da219475d7f35b4c25fc87ec6b902 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/226 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21TCL/SPEAr: move device specific codeAntonio Borneo
The initialization of memory port 1 is required by SPEAr310 only Change-Id: I9d655da1026795f02ff2f82aed36441068cf266d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/225 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21TCL/SPEAr: Add reference to ST Application NoteAntonio Borneo
ST-AN was mentioned but there was no reference Change-Id: Ie065f8faba94d63cf391a994ec895692d499394e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/224 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-18scripts: use adapter_khz not deprecated jtag_khzSpencer Oliver
Change-Id: Ibaeebf564a95360dcf21a0921ec99f5263f11915 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/202 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-17configuration for Freescale TWRK60N512 boardTomas Frydrych
Based on the K40/Kwikstik config files Change-Id: Icb3adc7126bacea65209b712ebaa0eb3b894372e Signed-off-by: Tomas Frydrych <tomas@sleepfive.com> Reviewed-on: http://openocd.zylin.com/210 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-17config: do not use deprecated stm32.cfgFelix Ruess
Change-Id: Id72d2d7f874043331ecb5586a3797d017606129e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Felix Ruess <felix.ruess@gmail.com> Reviewed-on: http://openocd.zylin.com/212 Tested-by: jenkins
2011-11-15Add Tincantools Flyswatter2 supportMarek Vasut
This is a successor to the Flyswatter cable and is very close to the original. The new revision is based on FT2232H. Change-Id: Icc6efcf0e4f9d8a10b65df8679b4973f6b375a9f Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: David Anders <danders@tincantools.com> Reviewed-on: http://openocd.zylin.com/193 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-08at91sam7: add a new target config file for at91sam7x512Aurelien Jacobs
The main difference with at91sam7x256 is the declaration of the second bank of flash. Change-Id: I87a20dcbb639b797799139ccf46cc73934fa3b9e Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/173 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-07target config files: Fix whitespace issues.Uwe Hermann
Drop useless double-space occurences, drop trailing whitespace, and fix some other minor whitespace-related issues. Change-Id: I6b4c515492e2ee94dc25ef1fe4f51015a4bba8b5 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/137 Tested-by: jenkins
2011-11-03interface configs: Add missing URLs and names.Uwe Hermann
Also, drop author name from interface/hilscher_* files, that info is in the git log, and none of the other files contain author names either. Change-Id: Idf0eb4279c4bff31d15c166619c0bf8b1c5bb877 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/138 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-02cfg: add Stellaris LM4F232 Evaluation Kit configSpencer Oliver
Change-Id: Ica754897bef6573a0738ed1afdfe1dfda07292fd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/151 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-02cfg: add Blizzard class to stellaris.cfgSpencer Oliver
Change-Id: I2a1320c696b6d9b070e4a927c4cd4d68178af751 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/150 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-02tx27stk5: add board init support for KaRo TX27 CPU moduleMark Vels
This patch adds support for a KaRo TX27 CPU module on a StarterkitV base board. The register settings have been extracted from a RedBoot distribution that is distributed along with the hardware by KaRo. This setup has been tested with a JTAGKey. The testing has been focussed on loading a program into memory and start execution. Although the flash seems to be correctly detected, no effort has been put in testing the NAND programming yet. Change-Id: Ib17763f1e3ecacd0eb9b5fdc32f8cba7a5e59be5 Signed-off-by: Mark Vels <mark.vels@team-embedded.nl> Reviewed-on: http://openocd.zylin.com/158 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-30interface configs: Fix whitespace and other issues.Uwe Hermann
Change-Id: I98825c7fb9bdee75b69b06005ed12a3f64ec4db4 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/139 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-30config files: Drop incorrect comments.Uwe Hermann
There are many "force an error till we get a good number" comments in target/board files. This refers to the use-case where a config script sets _CPUTAPID to 0xffffffff (which presumely gets overridden later): if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { # Force an error until we get a good number. set _CPUTAPID 0xffffffff } However, the same comment was also copy-pasted in many files which do _not_ set _CPUTAPID to 0xffffffff, where the comment doesn't make any sense at all. Drop those comments. Also, add one missing comment, and fix small whitespace and grammar issues. Change-Id: Ic4ba3b5ccba87ed40cea0d6a7d66609fbdfa3c71 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/136 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-27Remove use of undefined variable.Jim Norris
Change-Id: Id8fd345438c360b2a42857525f05360ce2794d21 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/127 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2011-10-26Add configuration for ATMEL SAM3N-EK board.Jim Norris
Change-Id: I525f6c346cace4e54f47659c5a7aceb29ee4baf2 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/125 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-26Add configuration for ATMEL SAM3N series.Jim Norris
Change-Id: Iac498ab37e59127b989f29a1c4167ab29d625b05 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/124 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-25stm3220g_eval.cfg: fix CHIPNAME.Marti Bolivar
The STM3220G-EVAL board has an STM32F207IGH6. ("...H6", not "...T6"). Change-Id: Iaf3dae6830c5c0685a1dcd1588d391434bc51be7 Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com> Reviewed-on: http://openocd.zylin.com/120 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-23cfg: Add interface config for Dangerous Prototypes BusBlasterRichard Barlow
The BusBlaster from Dangerous Prototypes is based on the FTDI FT2232H IC. It has a CPLD between the FT2232H and the JTAG header allowing it to emulate various debugger types. It comes configured as a JTAGkey compatible device. Change-Id: Iab56907bf67ded87001e628d93012f1e16287d90 Signed-off-by: Richard Barlow <richard@richardbarlow.co.uk> Reviewed-on: http://openocd.zylin.com/53 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-23add Freescale Kinetis K40 devices and Kwikstik eval boardMathias K
Change-Id: I4817921d09ab915c50f42651bc073690033450fe Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/51 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-19TMPA900/910 MCUs are always little endian.Uwe Hermann
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Change-Id: I8839f2cf0faf1b5ba9f99901c5ee028b199fabd2 Reviewed-on: http://openocd.zylin.com/35 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-19Toshiba TMPA900 config: Fix incorrect working area.Uwe Hermann
The Toshiba TMPA900 series (TMPA900/901) only has internal RAM regions RAM-0 (16kB) and RAM-1 (8kB) which we can use as working area. This is probably a copy-paste error from tmpa910.cfg, which has the correct values and sizes for the TMPA910 series (TMPA910/911/912/913): there are RAM-0, RAM-1, and RAM-2 (each 16kB). Also, change "built-in RAM" to "internal RAM" to match what the datasheet uses. Change-Id: I993cd6b7fadc28cf34e5cc18426bb2bb42597670 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/34 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-18luminary: add peripheral reset scriptSpencer Oliver
some luminary device classes require a reset script to emulate a hardware reset. Change-Id: Id505c92451244b48b0238c2130aebab2df8d208b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/30 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17AM/DM37x: Use ICEPick warm reset and include halt when gdb connects.Karl Kurbjun
Using the ICEPick reset seems to allow the processor to be halted sooner and the halt on gdb connection makes the connect process more robust. Change-Id: I0586f6e6becc60a729030509ef58907a19d545ec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/23 Tested-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-17ICEPick-C: Add support for warm reset through JTAG controller and provide ↵Karl Kurbjun
finer detail functions. This sets up simple functions that can later be used to provide additional ICEPick Operations. Change-Id: I313b8679267696fad87d23f3692963e513f2fe21 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/22 Tested-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-13Add an interface file for DLP Design DLP-USB1232H.Uwe Hermann
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H chip. Among other things, it can used as JTAG programmer if connected to the JTAG target properly. I have successfully wired the module to an Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD. The setup details and schematics are documented at: http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/20 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-13Add a board file for the Glyn Tonga2.Uwe Hermann
This is a Toshiba TMPA900CMXBG (ARM9) based SO-DIMM CPU module with 64MB DDR SDRAM, 256MB NAND flash, and on-board Ethernet. The board file provides a tonga2_init function which sets up the PLL/clocks and memory (SDRAM and SRAM), which allows writing a boot-loader into RAM via JTAG. Change-Id: I60522b97997bdf50e1f25aebab910d93a98522fb Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/19 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-03STM32L: Added flash driver and targetClément Burin des Roziers
Added the flash driver for the STM32L family, which highly differ from the STM32F family. Added the TCL target file for JTAG access.
2011-10-01Verdex: Add support for Gumstix Verdex boards.Ash Charles
Gumstix Verdex is a PXA270-based series of computer-on-modules. This configuration file is based off the voipac.cfg configuration with a different flash memory configuration. This has been tested flyswatter adapter to reflash a Gumstix Verdex XL6P board.
2011-09-30u8500 : config for L2 cacheMichel Jaouen
2011-09-30AM/DM37x: add ES1.2 silicon type into accountVladimir Zapolskiy
The missing value for ES1.2 silicon revision is mentioned in sprugn4m.pdf, and the recent TI Beagleboard XM is powered by it, so let support the revision.
2011-09-09Add definition for the STEVAL-PCC010 board with the STM32F207Uwe Bonnes
2011-08-30dsp568013 disable polling by defaultRodrigo L. Rosa
2011-08-25Add Valuline HD to config fileJonathan Dumaresq
This will add the BSTAP for the medium and high density devices
2011-08-24Fix redbee config filesJim Paris
Currently the board/redbee-*.cfg files incorrectly include the interface definition. Move the interfaces to interface/, and create a single board/redbee.cfg that is common to both boards. Intended usage is now: openocd -f interface/redbee-econotag.cfg -f board/redbee.cfg
2011-08-16versaloon driver updateSimonQian
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-08-02cfg: allow stellaris device class overrideB. A. Bryce
Some devices, eg. The Tempest class return the wrong device class when queried. Add the ability to manually override the device class. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-29cfg: support calling legacy stm32 scriptsSpencer Oliver
For the time being we support the old stm32 script names - this will be removed before the next release cycle. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-28cfg: update scripts to use new stm32 driver namesSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-27cfg: add Fujitsu FM3 configSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-18CPU name in TMPA900 config file should obviously be TMPA900 (not TMPA910).Michael Hunold
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-15stm32f2xxx: comments about frequency choiceØyvind Harboe
2011-06-26Add ULINK interface scriptMartin Schmölzer
2011-06-16Added Olimex STM32 {H,P}107.cfg boardDale Lukas Peterson
2011-06-12added minimodule interfacerlrosa
2011-06-08Added configuration file for STM3220G-EVAL board.Laurent Charpentier
2011-06-08Added configuration file for stm32f2xxx.Laurent Charpentier
2011-06-02uptech2410Bear
2011-05-29Board definition for mini6410/tiny6410 (ARM1176)Damjan Marion
The following mini6410/tiny6410 functions are available: init_6410 - initialize clock, timer, DRAM init_6410_flash - initializes NAND flash support install_6410_uboot - copies u-boot image into RAM and runs it
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 04:27:24 +0000