aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Expand)Author
2015-02-11em357: added target files for em357 and em358Ed Beroset
2015-02-11cfg: TI Tiva C dk-tm4c129x Evaluation KitsHeinz Schweiger
2015-02-11psoc4: support for Cypress PSoC 41xx/42xx familyTomas Vanek
2015-02-04flash/nor/stm32lx: use 0 base to autodetect second bank locationPaul Fertser
2015-02-02Add more STM32F3 IDs in target/stm32f3.cfg.Uwe Bonnes
2015-01-30tcl/target: add lpc8xx.cfgPaul Fertser
2015-01-26tcl/board: frdm kinetis boards have SRST connectedPaul Fertser
2015-01-26tcl/target/stellaris: Snowflake supports SYSRESETREQ tooPaul Fertser
2015-01-26tcl/target: consolidate Kinetis configsPaul Fertser
2015-01-26tcl/board: Add ST NUCLEO L152RE configurationThomas Eichinger
2015-01-26cfg: add srst_nogate to the supported targets, remove from board configsPaul Fertser
2015-01-26stm32f4/nucleo: Use only one configuration for all stm32f4 nucleo boards.Uwe Bonnes
2015-01-26stm32f0/nucleo: Use only one configuration for all stm32f0 nucleo boards.Uwe Bonnes
2015-01-15target/stm32xx: Endian is not configurable.Karl Palsson
2015-01-15tcl/interface/ftdi: add config for the IoT-LAB adapterPaul Fertser
2015-01-15tcl/board: Add TI TMDX570LS20SUSB board configAndreas Färber
2015-01-15cfg: stm32l1: Use specific chipnameKarl Palsson
2015-01-09cfg: fix lpc17xx regressionSpencer Oliver
2014-12-03stm32l: split l0/l1 support no jtag, different HSI settingsKarl Palsson
2014-12-03stm32: Fix L0/1xx CPUTAPID setting and add new L1xx BSTAPIDsJuha Niskanen
2014-11-24tcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz thereUwe Bonnes
2014-11-24tcl/target/stm32f4x: add F401 and F411 IDsUwe Bonnes
2014-11-02tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic diagramPaul Fertser
2014-10-16cmsis-dap: add serial number supportSpencer Oliver
2014-10-06cfg: remove incorrect execute permissionsSpencer Oliver
2014-10-06stm32: Add config file for a new board STM32L052 dsicoveryRémi PRUD'HOMME
2014-10-06stm32: add L0xx CPUTAPIDRémi PRUD'HOMME
2014-10-06interface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control definitionPaul Fertser
2014-09-29tcl/board: add TI Tiva C ek-tm4c1294xl configKarl Palsson
2014-09-22target: Remove "-variant" argumentAndreas Fritiofson
2014-09-22Support hla_serial command for ST-LINK adapters.Austin Phillips
2014-09-15cfg: Added Nucleo-F411RE board config.Nemui Trinomius
2014-09-15tcl/board/sheevaplug: add adapter_khz settingPaul Fertser
2014-09-11tcl/interface/ftdi/sheevaplug: fix device descriptionPaul Fertser
2014-09-08cfg: refactor lpc1xxx targets onto one base configVanya Sergeev
2014-09-08tcl/target: add config for К1879ХБ1Я, a hybrid ARM11/DSP SoC by RC ModuleБурага Александр
2014-09-08tcl/interface/ftdi: fix TRST for Olimex TINY adaptersPaul Fertser
2014-09-08tcl/interface/ftdi: add kt-link config (with SWD) for DP BusBlasterPaul Fertser
2014-09-08tcl/target/imx6: add yet another SJC tapidPaul Fertser
2014-08-19tcl/interface/ftdi: auto-select SWD from converters' configsPaul Fertser
2014-08-19tcl/board/stm32ldiscovery: fix breakageEldar Khayrullin
2014-08-11tcl/board: Add board configuration for nRF51822-mKITAndrey Smirnov
2014-08-11nRF51822: Add workaround for PAN-16 where not all RAM blocks reliably enabled...Angus Gratton
2014-08-11tcl/target: added support for TI OMAP/AM 3505 and 3517Andrey Skvortsov
2014-08-11Allow transports to override the selected target (hla configs unification)Paul Fertser
2014-08-04interface/ftdi: Mark flyswatter.cfg as testedAndreas Fritiofson
2014-08-02tcl/board: fix all the remaining boards that were sourcing ft2232 configsPaul Fertser
2014-07-10tcl/board: add STM32429I-EVAL and STM32439I-EVAL dev boards from ST.Fredrik Hederstierna
2014-07-10tcl/target/stm32l: restore slow clock on resetPaul Fertser
2014-07-10Adding support for the Atmel SAMR21.Thomas Schmid