aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2014-04-14cortex_a: fix endiannes issues on TI TMS570Seth LaForge
The TI TMS470 and TMS570 series of processors are BE-32 processors, despite BE-32 not being supported by ARM in the Cortex-R4 core. TI hacked in BE-32 support, which requires odd swizzling in OpenOCD to make memory reads and writes function correctly. In particular, without this change, OpenOCD word reads and writes had the bytes reversed, and halfword and byte packed reads were reading garbage. In my testing, this change fixes these problems. Change-Id: I21dd30f4b9003f20fcc85f674ab833407bb61f74 Signed-off-by: Seth LaForge <sethml@google.com> Reviewed-on: http://openocd.zylin.com/2064 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14tcl: bcm6348 target config, BT HomeHub v1 board configLee Bowyer
Also add the board to the firmware recovery script. Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0 Signed-off-by: Lee Bowyer <lee@sodnpoo.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29tcl/target: make milandr configs swd-compatiblePaul Fertser
Change-Id: Ibb34f0d7829b205341bcce511ffc2624bdfe2c75 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1962 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29nrf51: Add UICR writing supportAndrey Smirnov
SoftDevice stack ihex binary, provided by Nordic expects being able to write data necessary for its correct operation at the adresses inside UICR. This patch exposes UICR region of flash as a second bank on the MCU to facilitate that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: Idbc140b8de027f60655f78043877b7c054eb06f9 Reviewed-on: http://openocd.zylin.com/2013 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29cfg: or1k_generic: allow TAP_TYPE overrideFranck Jullien
This patch allows users to specify TAP_TYPE from the command line when using or1k_generic.cfg. Change-Id: I9f4b7d8e4867658fa34bb4e92fc3a5f25227df11 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/2056 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29tcl: add Zynq-7000 target and Zedboard board configsTim Sander
Change-Id: Ia7f2a57d1b32dda9936ad87e22635f7749ff3ce1 Signed-off-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2061 Tested-by: jenkins
2014-03-29cfg: add TI am43xx devicesFelipe Balbi
This adds support for the am43xx SoC and the AM437x GP EVM and AM438x ePOS EVM. Change-Id: I09cbb09072f38e0e08fdd520dedb6e67d45056be Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2047 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-17cfg: Added st nucleo board configs.Jens Hoffmann
This patch adds board configs for Nucleo FXXX boards. Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8 Signed-off-by: Jens Hoffmann <jehoffma@gmail.com> Reviewed-on: http://openocd.zylin.com/2022 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17tcl: target: icepick: add icepick_d_tapenable procedureFelipe Balbi
instead of replicating icepick_d_tapenable in many of TI's newer platforms, we can move to icepick.cfg and just call it from board TCL configuration file. This is similar to the C but has a few changes we need to make. Change-Id: I0ab48005ccd66cd5b67b919fb5e3b462288f211d Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2030 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-17tcl/interface/ftdi: add Digilent JTAG-SMT2 configPaul Fertser
Tested on ZedBoard by Tim Sander. Change-Id: I4316d9b4d36f01bbe91a46c78ea8bca22efb1a5a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2029 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17cfg: change default SAM4L cortex_m reset_configSpencer Oliver
From testing this target does not seem to support using SYSRESETREQ, change the default to the safe VECTRESET. This target also has other reset issues (srst not working) that will be addressed in another patch. Change-Id: Icfc78347dc71aa3a062ddea63190a818d7fbc760 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1995 Tested-by: jenkins Reviewed-by: Angus Gratton <gus@projectgus.com>
2014-03-17Make the Atmel SAM3 family SWD-awareJörg Wunsch
Atmel's SAM3 and SAM4 processor families are very close to each other in many respects. However, so far, only the SAM4 target script contained the magic to allow using SWD, while SAM3 was tied to JTAG only. This e.g. prevented the CMSIS-DAP driver from accessing SAM3 devices as it only uses SWD transport (by now). The patch pulls all the things from the SAM4 target script that are also applicable to SAM3 devices. With the patch, an Atmel CMSIS-DAP debugger (Atmel-ICE) was proven to be able to successfully attach to a SAM3S-EK evaluation kit. I also cross-checked that accessing through a SAM-ICE (Segger J-Link) still works with the patch. Change-Id: I20dafbff8e1e9f967da950e48a56205586eeef8d Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-on: http://openocd.zylin.com/2046 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17tcl/board: add config for DP Bus Blaster reconfigurationPaul Fertser
Reported and tested by Gracana on IRC. Change-Id: If0524d2d627d566e8b5e1d00784dd7556f44b125 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2036 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-17stlink_usb.c: add support for STLink V2-1Bartosz Bielawski
The new version of STLink (V2-1) has a different USB endpoint layout. As the PID of the device also changed it's possible to change EPs used by OpenOCD in runtime. The patch adds three new fields to stlink_usb_handle_s and assigns right EP numbers in stlink_usb_open(). Parts of the code inspired by and used with consent of Jens Hoffmann. Change-Id: I93b69fb889f15317e9bf864905f435905db39745 Signed-off-by: Bartosz Bielawski <bartosz.bielawski@gmail.com> Reviewed-on: http://openocd.zylin.com/2019 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-09bcm281xx: Add bcm281xx SoC and bcm28155_ap boardTim Kryger
Add support for Broadcom's dual A9 mobile SoC and its reference board. Change-Id: Ia145b120043bddc89c44726066023154ae390788 Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-on: http://openocd.zylin.com/1926 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-09interface/ftdi/xds100v2.cfg: Add another VID/PID, drop descTom Rini
The XDS100v2 is often embedded in a number of platforms using the VID/PID of 0x0403/0x6010 and a generic FTDI device description. Add this VID/PID combination and remove the description line. Change-Id: I370e6199ac24f802426e9541e19ee38f18f1209a Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2016 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-07cfg: Switch ti_beaglebone to new ftdi interfaceTom Rini
Tested on Beagelbone White. Change-Id: I544d7c1ba21a6bd594c0a1c4a9611639fa3c320d Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2017 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-04Add support for the Atmel SAMG53Andrey Yurovsky
flash: at91sam4: add support for the SAMG53 family (this also covers the SAMG51). The SAMG5x parts have an EEFC (enhanced embedded flash controller) which seems to be identical to the EFC that the sam4 driver supports. Add a script for the Xplained Pro G53 board, this has the onboard CMSIS-DAP debugger and a SAMG53N19. Tested on this board and chip combination. Change-Id: I12af50402cd2069b3c7380d92e6fe54816d6c045 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1974 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24nrf51: Implement the support for Nordic's nRF51 devicesAndrey Smirnov
Add support for Nordic's nRF51 chip series. Tested with nRF51822. Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1945 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24cfg: Make stm32f4x usable with SWD transportFatih Aşıcı
Change-Id: Ib8f3b414ec3c31cf8a112e75efe003e2237c59bb Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1951 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
2014-02-11quark_x10xx: add new target quark_x10xxAdrian Burns
Intel Quark X10xx SoC debug support added Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC Generic x86 32-bit code is in x86_32_common.c/h Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368 Signed-off-by: adrian.burns@intel.com Reviewed-on: http://openocd.zylin.com/1829 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-11interface/ftdi/xds100v2.cfg: default to reset state and ask user to release ↵Paul Fertser
it later This adapter is special and needs a reset sequence to be performed before operation. Since there're no suitable hooks to do that, we have no choice but to ask the user to manually add the necessary commands to his or her config file. Change-Id: I48fb4276e77529768266840221b68c3ae26801e1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1884 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-04interface/ftdi: add TUMPA Lite configPaul Fertser
TUMPA Lite is a cheap FT232H-based breakout board, without any buffering. It also lacks series resistors so for some targets (especially when not using ridiculously short wires) one needs to add about 47 Ohms in series on every high-speed line. The SRST line is connected directly to the FT232H too. Real-life tested (including SRST and TRST). Change-Id: I5ed4f88d8d20384e9c52efe2ff0c290e2650d43e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1918 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-29cfg: LPC17xx default to using SYSRESETREQ to reset targetSpencer Oliver
Originally the LPC17xx user guide (UM10360 Rev 2) stated that SYSRESETREQ was not supported, so this was the default cortex_m reset mode. Rev 3 of the same user guide states that it is now supported. This has been verified on a LPC1768 mbed platform, previously I have not tested this functionality. Change-Id: I4858248903981a1c93ce75016e67c9e02702fcc5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1892 Tested-by: jenkins Reviewed-by: Jörg Fischer <turboj@gmx.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-20jtag/drivers: add USB-Blaster IIFranck Jullien
This patchs adds a new access driver for the existing USB-Blaster interface driver. This interface (as it is build-in on the sockit development board) is composed of a Cypress EZ-USB plus a CPLD. The Cypress chip as an embedded 8051 microcontroller. When it's powered up, the firmware is downloaded to the chip then the device is disconnected and reconnected with the new firmware. The USB-Blaster II protocol is almost identicial to the old one. The only difference is that you need to send a 0x5F before read TDO back. This command seems to copy TDO buffer datas to the endpoint buffer. Driver will be auto enabled if libusb-1.0 is detected. Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1791 Tested-by: jenkins Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-20cfg: add Freescale FRDM-KL46Z BoardSpencer Oliver
Change-Id: Ib585728f13a380eeeb2ada095f3e1a1c2aaf44cb Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1866 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-15Atmel samd: add support for SAMD21Andrey Yurovsky
Tested with SAMD21J18A on the SAMD21 Xplained Pro board. Change-Id: Ice9ebcd229ed038b3193baf92d910f9256d7ce91 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1873 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09add support for Atmel SAMD NOR FlashAndrey Yurovsky
This adds a new NOR Flash driver, "at91samd", which supports the built-in Flash on Atmel's D-series Cortex M MCUs, starting with the D20. Parts and their geometry are detected automatically using the DSU and lookup schemes described in the D20 document, 42129F–SAM–10/2013. Future D-series variants and families should presumably use this controller as well (possibly with minor changes and improvements). Tested on the SAMD20 Xplained Pro board, for which we also add the corresponding Flash configuration. Change-Id: Id8d3dd601e9f53121682d1a1190d0be4ea3b83eb Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1684 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09add support for Atmel SAM4L NOR FlashAndrey Yurovsky
This adds a new NOR Flash driver, "at91sam4l", which supports the built-in Flash on Atmel's low-power SAM4L family of Cortex M4 MCUs. Parts and their geometry are detected automatically using the Chip ID and lookup schemes described in document 42023E–SAM–07/2013. Tested on AT91SAM4LC4CA via the SAM4L XPlained Pro development kit. Change-Id: If73499dee92cc8ce231845244ea25c6984f6cecd Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1639 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09cfg: add initial Atmel xplained kit supportSpencer Oliver
These kits feature a CMSIS-DAP compliant debugger and so have been added as part of the pending support. Currently the flash drivers for the L8 and D20 are wip. One issue this implementation of CMSIS-DAP raised is that it supports 512byte HID reports, however using the current HIDAPI we have no cross platform way of querying this info. Long term we plan to add this support to HIDAPI. Change-Id: Ie8b7c871f58a099d963cd71a9f8a0105a38784e9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1625 Tested-by: jenkins
2014-01-09cfg: add stm32 cmsis-dap compliant configSpencer Oliver
Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1543 Tested-by: jenkins
2014-01-09cmsis-dap: add initial cmsis-dap supportSpencer Oliver
This is based on work from: https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap Main changes include moving over to using HIDAPI rather than libusb-1.0 and cleaning up to merge into master. Support for reset using srst has also been added. It has been tested on all the mbed boards as well as the Freedom board from Freescale. These boards only implement SWD mode, however JTAG mode has been tested with a Keil ULINK2 and a stm32 target - but requires a lot more work. Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1542 Tested-by: jenkins
2014-01-08tcl/netgear-dg834v3.cfg: add to easy firmware recovery listPaul Fertser
Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1851 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tools: add firmware recovery helpersPaul Fertser
This adds a set of helper functions with the aim to make it possible to flash mass-market devices without RTFMing altogether (i.e. to obsolete GPL-violating proprietary tjtag and other similar software). Real-life tested on an RT-N16 and WRT54GL. Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl/board: add Linksys WRT54GL v1.1 board configPaul Fertser
Tested flashing a real v1.1 device. Change-Id: Ie0d202b9fded8b92e731d93e0ef17be415a75fc8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1852 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08tcl: add bcm47xx config and Asus RT-N16 board using itPaul Fertser
This adds the bcm47xx config with the special undocumented trick to put it into standard EJTAG mode from the mystic "LV mode". The RAM setup is not done as it would require considerable efforts without much practical gain. The only issue I noticed so far is that "reset" doesn't actually reset the chip. Unfortunately, it's unclear how to make it work properly with SRST as OpenOCD asserts it in MIPS-specific code so the device will enter LV mode again but the LV tap is already disabled by that time, so it's not possible to send the magic command again. Anyway, this config is more than enough to "recover" any RT-N16 provided the hardware is not damaged. Change-Id: I0894e339763e6d20d1c93341c597382b479d039b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1849 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-08Update URLs and names in amdm37x.cfg, no functional changes.Robert P. J. Day
* openocd.berlios.de -> openocd.sourceforge.net * Update link to AM/DM37x Technical Reference Manual (ver R) * "ICEpick" is properly spelled "ICEPick" according to TI Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2 Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1856 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-31jtag_vpi: make the server address configurableFranck Jullien
Change-Id: I58e89c789b79ffb0b54ef94d208be876c271ddf7 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1840 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22target/imx6: Fix typo in setting _SJC_TAPID from SJC_TAPID variableAlex Murray
The set command was missing the $ prefix on the SJC_TAPID variable and so would fail if SJC_TAPID was set Change-Id: Ib9af58f5188bd8a2bc3f888309f203d624476c27 Signed-off-by: Alex Murray <alex.murray@cohdawireless.com> Reviewed-on: http://openocd.zylin.com/1811 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-19target: add kl25z HLA (stlink) configPaul Fertser
Based on Nemuisan Tokusei's. Untested, but original config was reported to work ok. Change-Id: Ic991dce55bfca266880081fe2bbd9e6e263b0fc0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1803 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17at91sam7sx.cfg: fix use $_TARGETNAME as target identifier, not '0' warningSergey A. Borshch
all other at91 cfg files already has this fix. It also fix "No flash at address 0x...." error when JTAG chain consist of more than one at91sam7sx cores during attempt to flash other than first mcu in chain. Change-Id: I7785d9103d0fc494b6a823e2c73f850373ffe112 Signed-off-by: Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on: http://openocd.zylin.com/1812 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-17cfg: Add new BSTAPID for STM32F42xxx and STM32F43xxx seriesNemui Trinomius
STM32F42xxx & STM32F43xxx series boudary scan TAP-ID are differ from STM32F405xx/07xx & STM32F415xx/17xx. And Section number was also fixed for RM0090 rev5. Tested on a STM32F427IIT6 and STM32F429ZIT6. Change-Id: Ie9c54c55b97b9c396ace752d94ea2ad916cc8479 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1808 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14tcl/target: add config for Milandr's 1986ве1т controllerPaul Fertser
This is a Cortex-M1 controller targetting aviation appliances. Contributed (and live-tested) by 8daemon. Change-Id: I133d6122cf6492b51ddbdbd800c16ba121d51bf3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1818 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14ftdi/neodb.cfg: mark as testedPaul Fertser
Working against openmoko gta02 target, including TRST and SRST (the stupid samsung chip fully resets under trst, so it's actually of little use here). Change-Id: I831124659fc12efbccef536f07d15509c2112f92 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1814 Tested-by: jenkins Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14topic: Support for the Xilinx BSCAN_* Virtual JTAG in OpenriscSergio Chico
This add support to the Xilinx BSCAN_* virtual JTAG interface. This is the Xilinx equivalent of the Altera sld_virtual_jtag interface, it allows a user to connect to the debug unit through the main FPGA JTAG connection. Change-Id: Ia438e910650cff9cbc8f810b719fc1d5de5a8188 Signed-off-by: Sergio Chico <sergio.chico@gmail.com> Reviewed-on: http://openocd.zylin.com/1806 Tested-by: jenkins Reviewed-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14stm32lx_dual_bank.cfg: fix typo in file pathAndrey Yurovsky
s/stm32l1x/stm32lx ...this makes tm32lx_dual_bank.cfg work again. Change-Id: I04dc617523caa6b46c675fe9b700d1bbe88170e6 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1832 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06add TI TMS570 support scriptsAndrey Yurovsky
Add support for the TMS570 Cortex-R4 MCU from TI and their USB stick development kit, TMDX570LS31USB. Tested attaching, reset/halt/run, and reading and writing memory and registers. Change-Id: I12d779cef0c2b834f9bcf722307f35677cc4bd8f Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1788 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31ftdi/tumpa.cfg: enable proper output buffer control, add another USB IDPaul Fertser
The schematics used for writing the config file were incorrect, real hardware needs ACBUS3 _low_ as it's connected directly to the output buffer's !OE pin. Also apparently sometimes TUMPA comes with default FTDI IDs. Real-life tested (including TRST and SRST) with a custom stm32f103 board, thanks to Mike Wang for the adapter sample. Change-Id: Iab566e6d14f8392030f6ff2c8d976e1b57cf5ce6 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1789 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29tcl: add memory testing functions for board diagnosticsPaul Fertser
This is a tcl implementation of public domain tests by Michael Barr, http://www.barrgroup.com/Embedded-Systems/How-To/Memory-Test-Suite-C The initial porting is done by Shane Volpe and posted to the mailing list: http://www.mail-archive.com/openocd-development@lists.berlios.de/msg16676.html This patch includes some cosmetic amendments plus hardcodes 32bit word size (as the code depends on memread32/memwrite32 anyway) which fixes original code's issue of testing only the first quarter of the specified nBytes. Change-Id: I5f3a66f1f16fc4082c7a5a6aba338430646ed21c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1455 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-29Remove jtag_rclk from target configsPaul Fertser
Some boards might have RCLK omitted from the JTAG connector and if the interface claims support for it, OpenOCD will end up trying to use RCLK while it's actually impossible. This is a "cd tcl/target; sed -i s/jtag_rclk/adapter_khz/g *" patch. Change-Id: Iee7337107bc1457966b104389ba9db75a9c860b4 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1695 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 15:30:20 +0000