aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2013-12-14stm32lx_dual_bank.cfg: fix typo in file pathAndrey Yurovsky
s/stm32l1x/stm32lx ...this makes tm32lx_dual_bank.cfg work again. Change-Id: I04dc617523caa6b46c675fe9b700d1bbe88170e6 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1832 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-11-06add TI TMS570 support scriptsAndrey Yurovsky
Add support for the TMS570 Cortex-R4 MCU from TI and their USB stick development kit, TMDX570LS31USB. Tested attaching, reset/halt/run, and reading and writing memory and registers. Change-Id: I12d779cef0c2b834f9bcf722307f35677cc4bd8f Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1788 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31ftdi/tumpa.cfg: enable proper output buffer control, add another USB IDPaul Fertser
The schematics used for writing the config file were incorrect, real hardware needs ACBUS3 _low_ as it's connected directly to the output buffer's !OE pin. Also apparently sometimes TUMPA comes with default FTDI IDs. Real-life tested (including TRST and SRST) with a custom stm32f103 board, thanks to Mike Wang for the adapter sample. Change-Id: Iab566e6d14f8392030f6ff2c8d976e1b57cf5ce6 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1789 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29tcl: add memory testing functions for board diagnosticsPaul Fertser
This is a tcl implementation of public domain tests by Michael Barr, http://www.barrgroup.com/Embedded-Systems/How-To/Memory-Test-Suite-C The initial porting is done by Shane Volpe and posted to the mailing list: http://www.mail-archive.com/openocd-development@lists.berlios.de/msg16676.html This patch includes some cosmetic amendments plus hardcodes 32bit word size (as the code depends on memread32/memwrite32 anyway) which fixes original code's issue of testing only the first quarter of the specified nBytes. Change-Id: I5f3a66f1f16fc4082c7a5a6aba338430646ed21c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1455 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-29Remove jtag_rclk from target configsPaul Fertser
Some boards might have RCLK omitted from the JTAG connector and if the interface claims support for it, OpenOCD will end up trying to use RCLK while it's actually impossible. This is a "cd tcl/target; sed -i s/jtag_rclk/adapter_khz/g *" patch. Change-Id: Iee7337107bc1457966b104389ba9db75a9c860b4 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1695 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2013-10-21armada370: initial support for Marvell Armada 370 familyGreg Ungerer
Initial support for using the jtag interface to the Marvell Armada 370 family of SoCs. Change-Id: Id823a567e8805ac622c3c330bc111297c1dae37e Signed-off-by: Greg Ungerer <gerg@uclinux.org> Reviewed-on: http://openocd.zylin.com/1690 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-15cfg: add STM32F429 discovery board configSpencer Oliver
Change-Id: I4ee7a8185a02fac9d1f6079ab34d6a9f7047193a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1691 Tested-by: jenkins
2013-10-03board: add TM4C123G LaunchPad configPaul Fertser
Almost the same as the LM4F120 LaunchPad but the chip is using the new naming scheme (Tiva C series), supports USB OTG and has some new PWM hardware blocks. Change-Id: I6a7b2df76768766471f366cddaf64df3cc63f5f2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1647 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-26Add new target type: OpenRISCFranck Jullien
Add support for OpenRISC target. This implementation supports the adv_debug_sys debug unit core. The mohor dbg_if is not supported. Support for mohor TAP core and Altera Virtual JTAG core are also provided. Change-Id: I3b1cfab1bbb28e497c4fca6ed1bd3a4362609b72 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1547 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-08jtag: drivers: Add JTAP VPI client driverFranck Jullien
This patch adds a driver for the jtag_vpi server [1]. This server is now part of the ORPSoC version 3 (OpenRISC Reference Platform SoC). The jtag_vpi server provides an interface between OpenOCD and a simulated core. [1] http://github.com/fjullien/jtag_vpi Change-Id: I717b72cace4845f66c878581345074f99002e21a Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-29cfg: EFM32 supports SYSRESETREQ so use itSpencer Oliver
Change-Id: If52fdea025a2f9620ad4ddacfb83cbb83a94944d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1541 Tested-by: jenkins
2013-08-29efm32: set safe minimum working areaSpencer Oliver
The smallest available RAM size for this family is 2K, set this as the default. Issue reported by quitte on IRC. Change-Id: I3318f7f268f7681ffe2cddab61820f4b94c4e5fd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1559 Tested-by: jenkins
2013-08-29Added new ftdi interface devicePushpal Sidhu
Added new configuration file for gw16042 device. Also added this to interface/ftdi examples in documentation. Change-Id: I07bb10bfc79a5d13007288cd57f254d889075214 Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Reviewed-on: http://openocd.zylin.com/1563 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15interface/ftdi/tumpa: remove ftdi_device_desc as it's incorrectPaul Fertser
The end users on IRC report that actual USB device has different information in its descriptor so it doesn't match. Remove it altogether. Change-Id: Id7841667390a514581e630e67b9283675803135b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1548 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15Add tcl configurations for Altera Soc devicesBrad Riensche
This commit adds two tcl configuration files, one for the Altera Cyclone V SoC series, and one for the SoCkit development board. The board configuration is able to halt and resume the cpu cores, and dump register contents etc. It has not been fully tested, however. Change-Id: Id3f18c3408975cf986a5f5aec410b5b13240c35e Signed-off-by: Brad Riensche <brad.riensche@gmail.com> Reviewed-on: http://openocd.zylin.com/1494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-09remove the untested warning in ftdi/olimex-arm-usb-tiny-h.cfgSergey Alirzaev
the dongle seems working, including srst signal Change-Id: I5da9046bd8a35d8d826f1b663c01bd2600a6cf14 Signed-off-by: Sergey Alirzaev <zl29ah@gmail.com> Reviewed-on: http://openocd.zylin.com/1545 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07mdr32fx: support for Milandr's MDR32Fx internal flash memoryPaul Fertser
This adds example config and flash driver for russian Cortex-M3 microcontroller model. Run-time tested on MDR32F9Q2I evaluation board; the flash driver should be compatible with MDR32F2x (Cortex-M0) too but I lack hardware to test. There're no status bits at all, the datasheets specifies some delays for flash operations instead. All being in <100us range, they're hard to violate with JTAG, I hope. There're also no flash identification registers so the flash size and type has to be hardcoded into the config. The flashing is considerably complicated because the flash is split into pages, and each page consists of 4 interleaved non-consecutive "sectors" (on MDR32F9 only, MDR32F2 is single-sectored), so the fastest way is to latch the page and sector address and then write only the part that should go into the current page and current sector. Performance testing results with adapter_khz 1000 and the chip running on its default HSI 8MHz oscillator: When working area is specified, a target helper algorithm is used: wrote 131072 bytes from file testfile.bin in 3.698427s (34.609 KiB/s) This can theoretically be sped up by ~1.4 times if the helper algorithm is fed some kind of "loader instructions stream" to allow sector-by-sector writing. Pure JTAG implementation (when target memory area is not available) flashes all the 128k memory in 49.5s. Flashing "info" memory region is also implemented, but due to the overlapping memory addresses (resulting in incorrect memory map calculations for GDB) it can't be used at the same time, so OpenOCD needs to be started this way: -c "set IMEMORY true" -f target/mdr32f9q2i.cfg It also can't be read/verified because it's not memory-mapped anywhere ever, and OpenOCD NOR framework doesn't really allow to provide a custom handler that would be used when verifying. Change-Id: I80c0632da686d49856fdbf9e05d908846dd44316 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1532 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-01imx6: add new id for SJC as found on i.MX6DPaul Fertser
Austriancoder on IRC reports getting this ID on his board. Change-Id: Ie859f0ee422e18fdb94bf817cdd2b41d15b968da Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1533 Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15ftdi/board: Add support for DENX M53EVKMarek Vasut
Add support for DENX M53EVK board and it's integrated on-board JTAG adapter using FT2232H. Change-Id: I022dcafa7799bb84a7873ba67ed82f1e49094320 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/1461 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-15target: Pull out the jtag_rtck from iMX5x filesMarek Vasut
Pull the jtag_rtck setting from imx51.cfg and imx53.cfg . Since not all boards using these CPUs do support RTCK signal, move the configuration of RTCK into board files. Change-Id: I632c5d38e00ada8779a451cd26428fd122452001 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/1460 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-09ftdi/xds100v2.cfg: Remove the warning as it has been testedLaszlo Papp
Change-Id: I3a8711867e247bc49caa79274ae882f07719d4ce Signed-off-by: Laszlo Papp <lpapp@kde.org> Reviewed-on: http://openocd.zylin.com/1492 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-07-08cfg: Update Flyswatter 2 URLAndreas Fritiofson
It pointed to the Flyswatter 1 page. Change-Id: Ib7e82669a31cad2bf8f6ba4a60b25ef9920b2584 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1478 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-07Fix a typo.John Szakmeister
Change-Id: I3c8ab03932d8769c1cf0c0ccf84cd150c5eb82d8 Signed-off-by: John Szakmeister <john@szakmeister.net> Reviewed-on: http://openocd.zylin.com/1481 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-12stm32w: add STM32w108xx generic configurationGiuseppe Barba
Add generic TCL configuration for STM STM108Wxx chips. Change-Id: I981cdccb78833f442c3be4188c8c023064067e4e Signed-off-by: Giuseppe Barba <giuseppe.barba@gmail.com> Reviewed-on: http://openocd.zylin.com/1439 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12str9: ignore boundary scan versionSpencer Oliver
Ignore version of Boundary Scan TAP in newer revisions of the str9. Change-Id: I6e205f8c731f07078c469e686025857c180f3a6d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1436 Tested-by: jenkins
2013-06-12ftdi: config for TUMPAPaul Fertser
Add a config file for TIAO USB Multi-Protocol Adapter. Based on schematics from http://www.mediafire.com/?zv158nnx1gv0cy2 Cc: Volkan K <volkan-k@users.sourceforge.net> Change-Id: I0dfd93b0b1e558e4ccd7c94c005c099947ec94df Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1438 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-10Add BCM2835 (as found in Raspberry Pi) interface driverPaul Fertser
This adds support for JTAG programming by bitbanging GPIOs exposed on the RaspberryPi's expansion header. Tested by connecting directly to an STM32VLDiscovery board, without any additional circuity. I observed maximum about 4MHz on the TCK pin with an old analogue 'scope and about 100kHz when setting the speed to 100kHz. Busyloop waiting is needed because even with a single 0ns nanosleep call (with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low to be useful. The speed testing with adapter_khz 2000 gave the following results: sudo chrt -f 1 nice -n -19 ./src/openocd \ -f interface/raspberrypi-native.cfg \ -c "set WORKAREASIZE 0x2000" \ -f target/stm32f1x.cfg -c "adapter_khz 2000" wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s) dumped 131072 bytes in 1.445699s (88.538 KiB/s) This is 3.7 times faster for writing and 14.3 times faster for reading compared to the generic sysfsgpio driver; probably the writing speed is limited by the target itself here and reading speed might be considerably higher too with appropriate connection and a capable target. BCM2835 name is choosen over BCM2708 because the published peripherals datasheet uses the particular model name and not family name. Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/758 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05Added OpenJTAG DriverRyan Corbin
Updated OpenJTAG driver from www.openjtag.org to work with latest version of OpenOCD. Change-Id: I2917f4e5835fb9ca5265e81dc38515fa97ae9503 Signed-off-by: Ryan Corbin <corbin.ryan@gmail.com> Reviewed-on: http://openocd.zylin.com/1406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05nds32: add new target type nds32_v2, nds32_v3, nds32_v3mHsiangkai Wang
Add target code for Andes targets. Change-Id: Ibf0e1b61b06127ca7d9ed502d98d7e2aeebbbe82 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1259 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05aice: add Andes AICE supportHsiangkai Wang
Andes AICE uses USB to transfer packets between OpenOCD and AICE. It uses high-level USB commands to control targets instead of using JTAG signals. I define an interface as aice_port_api_s. It contains all basic operations needed by target-dependent code. Change-Id: I117bc4f938fab2732e44c509ea68b30172d6fdb9 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1256 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-29interface/ftdi: remove "untested" warning from DP BusblasterPaul Fertser
This is reported as working by mitsakos on IRC. Change-Id: I26b97779c3e8e237c5b3996aa81183031b12ec0c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1419 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-28targets: fix target_type name for Cortex-A targetsPaul Fertser
Commit d9ba56c295f057e716519a798bf9cdb4898c24f4 did a bunch of renaming of cortex_a8 to cortex_a, including the names in config files. However that introduced a regression as the name in target_type struct remained unchanged. This adds the last missing bit: actual renaming of the target name as understood by OpenOCD. Also change the (hopefully) last instance of using it in the supplied config files, namely from imx6.cfg. Change-Id: Ib9289fc6d946630133ec6e36c20015ccb50acf61 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1420 Tested-by: jenkins Reviewed-by: Chris Johns <chrisj@rtems.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10stm32 configs: use 4kB working area size by defaultPaul Fertser
This is needed for configs that might be used with the cheapest STM32F100 parts that have only 4kB SRAM. Restrictions for the other STM32 families are verified to be set appropriately. Change-Id: I1ad2370435015604db9f27c1a76c153480311a28 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1378 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-02cfg: remove whitespaceSpencer Oliver
Change-Id: I20edbb50efc03711195102f4c6dc8bcfaf043d44 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1374 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-05-02cfg: ignore ICEPick jrc tap versionSpencer Oliver
Due to reports of newer targets using a updated version of the ICEPick tap rather than add another tapid we ignore the tap version. Also see Trac 49 for details. Change-Id: Ic78414c54af2545c817e1bb2c860970c1b587259 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1373 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-28target: rename cortex_a8 to cortex_aSpencer Oliver
Rename cortex_a8 target to use a more correct cortex_a name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1130 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28target: rename cortex_m3 to cortex_mSpencer Oliver
Rename cortex_m3 target to use a more correct cortex_m name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: Ia8429f38e88da677249c5caa560c50f8ce56ea10 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1129 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21stm32f30x: Add boundary scan TAP ID to match siliconAndreas Fritiofson
Change-Id: I74ef3cfc437540aedd99da46ac3e0c6cd9c5cd8d Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1354 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-19stm32w: Added sample target configuration for STM32W108 with STLink-V2Ben Nahill
As requested, here is the target configuration that I'm using for an STLink-V2-attached STM32W108C8. For some reason, it only seems to work with "reset_config trst_only". Change-Id: Icbff4f83343e1f505d8afdfc53ff6f8b7496cac9 Signed-off-by: Ben Nahill <bnahill@gmail.com> Reviewed-on: http://openocd.zylin.com/1347 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-15cfg: Added cfg script for at91sam4sd32x targetsPeter Dietzsch
Change-Id: I3b8a54d89a180bfded3dae3f1fe3d940540e6e7d Signed-off-by: Peter Dietzsch <peter.dietzsch@ib-dt.de> Reviewed-on: http://openocd.zylin.com/1333 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-02pic32mx: 0 wait state optionSalvador Arroyo
By default pic32mx starts after any reset with 1 wait state for RAM access/exec. It can be changed to 0 wait states by clearing the BMXWSDRM bit (bit 6) in BMXCON register. With 0 wait states near doubles the execution speed. CRC check sum can be done much faster increasing verify_image speed. Fast data transfer also works with a bit higher scan rate, up to 1500 Khz. This option can be set at any time with mww 0xbf882004 0x40 or cleared with mww 0xbf882008 0x40. Some numbers for FTDI/HS with current devel code and a elf file: Core clock / wait states verify_image speed ------------------------------------|------------------------------ 4 Mhz / 1 21 KiB/s 4 Mhz / 0 36 KiB/s 8 Mhz / 1 37 KiB/s 8 Mhz / 0 57 KiB/s Change-Id: I4092ad0f3753f72f77108718d0ed3a3ab84e3b23 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1141 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-03-13interface: opendous_ftdi config file addedRodrigo Melo
This config file add support to the opendous cable based on the chip ft2232H, using the ft2232 interface driver. Change-Id: I8171a0c475af8d61e081844ee86466a392138fb0 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1096 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-07interface: opendous_ftdi config file addedRodrigo Melo
This config file add support to the opendous cable based on the chip ft2232H, using the ftdi interface driver. Change-Id: I4491f99d7b14f7078a04583ef0c4acd8692c4349 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-06cfg: add Netgear DG834v3 configurationSpencer Oliver
Change-Id: I3f4880d8b07b9623544b94d316b37e6d0ae97020 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1189 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-06cfg: add basic support of Freescale i.MX6 series targetsVladimir Zapolskiy
This change adds a simple target configuration for Freescale single/dual/quad core i.MX6 SoCs, only one core is configured by default. Change-Id: I853dd27f4c6765b7f731be2ddea82e85d496c6a4 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-on: http://openocd.zylin.com/1135 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-05Change reset configuration.Mathias K
This patch change the default reset config from SYSRESETREQ to the working VECTRESET. Change-Id: I21a9a74b9c0c68cfa3a6e6dac9b123acc98a93cb Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1186 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-25stm32: add support for the STM32Lx 384kb dual bank flashJohan Almquist
This update adds support for the STM32Lx 384kb dual bank flash. Previously there was a problem when writing an image that was larger than 192Kb. That lead to openocd printing out two error messages like "Error: access denied / write protected" and "Error: invalid program address". The reason was that the stm32lx driver tried to write half pages which overlapped into the next flash bank. A new configuration file stm32lx_dual_bank.cfg can be used for stm32lx chips with dual bank flash (256kb or 384kb devices). A sanity check was added for probed flash size values to fix the issue seen on some ST samples that answered incorrectly. Change-Id: I69e25131983d88613be8606b438f98870c5f1e52 Signed-off-by: Johan Almquist <johan.almquist@assaabloy.com> Reviewed-on: http://openocd.zylin.com/1125 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-08jtag_interface: .speed can be NULL when not neededFranck Jullien
adapter_init (core.c) won't check speed configuration of the selected interface if it's not needed (.speed = NULL). When it's not needed, we can now omit adapter_khz in init scripts and we don't have to implement dummy handlers for speed_div and khz functions. It also removes calls to adapter_khz in interface configuration files when not used anymore. Change-Id: I6eb1894385503fede542a368f297cec6565eed44 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1131 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-01-14flash: EFM32 flash implementationRoman D
Limited (no page unprotect, no block writes) implementation of EFM32 flash support. Verified with EFM32 development kit and STLink V2 adapter using SWD. Change-Id: I3db2054d9aa628a1fe4814430425db3c9959c71c Signed-off-by: Roman D <me@iamroman.org> Reviewed-on: http://openocd.zylin.com/1106 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-12-30cfg: increase stm32l-discovery working areaSpencer Oliver
This part has 16k ram so make it all available. Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1006 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 22:27:01 +0000