aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2013-04-28target: rename cortex_a8 to cortex_aSpencer Oliver
Rename cortex_a8 target to use a more correct cortex_a name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1130 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28target: rename cortex_m3 to cortex_mSpencer Oliver
Rename cortex_m3 target to use a more correct cortex_m name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: Ia8429f38e88da677249c5caa560c50f8ce56ea10 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1129 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21stm32f30x: Add boundary scan TAP ID to match siliconAndreas Fritiofson
Change-Id: I74ef3cfc437540aedd99da46ac3e0c6cd9c5cd8d Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1354 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-19stm32w: Added sample target configuration for STM32W108 with STLink-V2Ben Nahill
As requested, here is the target configuration that I'm using for an STLink-V2-attached STM32W108C8. For some reason, it only seems to work with "reset_config trst_only". Change-Id: Icbff4f83343e1f505d8afdfc53ff6f8b7496cac9 Signed-off-by: Ben Nahill <bnahill@gmail.com> Reviewed-on: http://openocd.zylin.com/1347 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-15cfg: Added cfg script for at91sam4sd32x targetsPeter Dietzsch
Change-Id: I3b8a54d89a180bfded3dae3f1fe3d940540e6e7d Signed-off-by: Peter Dietzsch <peter.dietzsch@ib-dt.de> Reviewed-on: http://openocd.zylin.com/1333 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-04-02pic32mx: 0 wait state optionSalvador Arroyo
By default pic32mx starts after any reset with 1 wait state for RAM access/exec. It can be changed to 0 wait states by clearing the BMXWSDRM bit (bit 6) in BMXCON register. With 0 wait states near doubles the execution speed. CRC check sum can be done much faster increasing verify_image speed. Fast data transfer also works with a bit higher scan rate, up to 1500 Khz. This option can be set at any time with mww 0xbf882004 0x40 or cleared with mww 0xbf882008 0x40. Some numbers for FTDI/HS with current devel code and a elf file: Core clock / wait states verify_image speed ------------------------------------|------------------------------ 4 Mhz / 1 21 KiB/s 4 Mhz / 0 36 KiB/s 8 Mhz / 1 37 KiB/s 8 Mhz / 0 57 KiB/s Change-Id: I4092ad0f3753f72f77108718d0ed3a3ab84e3b23 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/1141 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-03-13interface: opendous_ftdi config file addedRodrigo Melo
This config file add support to the opendous cable based on the chip ft2232H, using the ft2232 interface driver. Change-Id: I8171a0c475af8d61e081844ee86466a392138fb0 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1096 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-07interface: opendous_ftdi config file addedRodrigo Melo
This config file add support to the opendous cable based on the chip ft2232H, using the ftdi interface driver. Change-Id: I4491f99d7b14f7078a04583ef0c4acd8692c4349 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-06cfg: add Netgear DG834v3 configurationSpencer Oliver
Change-Id: I3f4880d8b07b9623544b94d316b37e6d0ae97020 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1189 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-06cfg: add basic support of Freescale i.MX6 series targetsVladimir Zapolskiy
This change adds a simple target configuration for Freescale single/dual/quad core i.MX6 SoCs, only one core is configured by default. Change-Id: I853dd27f4c6765b7f731be2ddea82e85d496c6a4 Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-on: http://openocd.zylin.com/1135 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-05Change reset configuration.Mathias K
This patch change the default reset config from SYSRESETREQ to the working VECTRESET. Change-Id: I21a9a74b9c0c68cfa3a6e6dac9b123acc98a93cb Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1186 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-25stm32: add support for the STM32Lx 384kb dual bank flashJohan Almquist
This update adds support for the STM32Lx 384kb dual bank flash. Previously there was a problem when writing an image that was larger than 192Kb. That lead to openocd printing out two error messages like "Error: access denied / write protected" and "Error: invalid program address". The reason was that the stm32lx driver tried to write half pages which overlapped into the next flash bank. A new configuration file stm32lx_dual_bank.cfg can be used for stm32lx chips with dual bank flash (256kb or 384kb devices). A sanity check was added for probed flash size values to fix the issue seen on some ST samples that answered incorrectly. Change-Id: I69e25131983d88613be8606b438f98870c5f1e52 Signed-off-by: Johan Almquist <johan.almquist@assaabloy.com> Reviewed-on: http://openocd.zylin.com/1125 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-08jtag_interface: .speed can be NULL when not neededFranck Jullien
adapter_init (core.c) won't check speed configuration of the selected interface if it's not needed (.speed = NULL). When it's not needed, we can now omit adapter_khz in init scripts and we don't have to implement dummy handlers for speed_div and khz functions. It also removes calls to adapter_khz in interface configuration files when not used anymore. Change-Id: I6eb1894385503fede542a368f297cec6565eed44 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1131 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-01-14flash: EFM32 flash implementationRoman D
Limited (no page unprotect, no block writes) implementation of EFM32 flash support. Verified with EFM32 development kit and STLink V2 adapter using SWD. Change-Id: I3db2054d9aa628a1fe4814430425db3c9959c71c Signed-off-by: Roman D <me@iamroman.org> Reviewed-on: http://openocd.zylin.com/1106 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-12-30cfg: increase stm32l-discovery working areaSpencer Oliver
This part has 16k ram so make it all available. Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1006 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30cfg: stm32l use minimum family ram size for working areaSpencer Oliver
The smallest pert in the family has 10k RAM, so use that as a default for the working area. Change-Id: I78be0d14a254c109ac15a7163552c6132f810416 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1005 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-30cfg: enable stlink stm32l HSISpencer Oliver
Switch to using the internal HSI when a reset init is called, this also matches the std stm32l cfg. Read (verify) speed is increased from 17 to 120 KiB/s. Change-Id: Ic94ba85949ffdefa17b7be45eef14e30f941d107 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1004 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-12-23icdi: add TI icdi interfaceSpencer Oliver
This is the new proprietary interface replacing the older FTDI based adapters. It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad. Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/922 Tested-by: jenkins
2012-12-23stlink: rename stlink cmd namesSpencer Oliver
As part of the switch to using the hla for the stlink interface we rename the cmds to a more generic name. Update scripts to match new names. Also add handlers for deprecated names. Change-Id: I6f00743da746e3aa13ce06acfdc93c8049545e07 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/921 Tested-by: jenkins
2012-12-23stlink: use common layoutSpencer Oliver
Even though the stlinkv1 and stlinkv2 use different usb classes they share the same layout scheme. Merge the two into a common layout, thus enabling us to support other adapter layouts. Change-Id: I7d02c44a7f94ebc7f2cb5428b02ee40294fb430d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/918 Tested-by: jenkins
2012-12-11LPC1788 target configuration file.is2t
Change-Id: I68bd6b7c19d9d1bee13d0921c32b4490e68ab8f2 Signed-off-by: is2t <devel@is2t.com> Reviewed-on: http://openocd.zylin.com/1002 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-11-16Pic32mx.cfg: Change system clock to 8Mhz after reset-init.Salvador Arroyo
As for openocd 0.6.0-rc2 the function mips32_pracc_fastdata_xfer() should now work at a scan frequency up to 1200Khz. Mainly usefull to increase programming speed. Also verify_image should be slightly faster. Change-Id: I1e9b2be73690a4597e2f6ba069c1205026850f07 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/805 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06Added support for NXP LPC1850 MicrocontrollerGianluca Renzi
Added a new configuration file for LPC18xx based boards, such as HitexLPC1850RevA Evaluation Board, and all other based on the same microcontroller by NXP. Change-Id: I68c3827be535b6d09a5c70b6d57191937d00354d Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it> Reviewed-on: http://openocd.zylin.com/930 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-06Generic LPC1850 board w/ SPIFI flash.Gianluca Renzi
This config file is intended as an example of how to use the lpcspifi flash driver, but it should be functional for most LPC1850 boards utilizing SPIFI flash. Change-Id: I855854282336701fd210134497ce014017f3aaec Signed-off-by: Gianluca Renzi <gianlucarenzi@eurekelettronica.it> Reviewed-on: http://openocd.zylin.com/929 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-28ftdi/flyswatter2.cfg: Define the LED signalPeter Stuge
Change-Id: Ic5d85c0d855bcffba54de7df6cff4d726656af97 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/940 Tested-by: jenkins
2012-10-28ftdi/flyswatter2.cfg: Fix the signal layoutPeter Stuge
Change-Id: If6612af25fa3562f49e9c8ccff01b6ef0af5ceb0 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/938 Tested-by: jenkins
2012-10-02lpc1768-stick: avoid driving srst high at startupSpencer Oliver
this avoid driving nSRST high after startup, by making sure the nOE is initialized inactive/high. This also matches the config used for the STM32-PerformanceStick. Change-Id: I9376de575b7dc834310d57dbd58575d51f60183e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/878 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: cortino tested and workingSpencer Oliver
Change-Id: I13534742c76ebbb05b47bf98768c997068da747a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/851 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect cortino reset configSpencer Oliver
The cortino uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I28f6781bccae24de79aa6a03161f298a14fe2581 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/850 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: ftdi icdi enable srst open drain configSpencer Oliver
Change-Id: I21a115121f167dc88cd9bf2d1ca1ac9f3e1110d7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/848 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: update ti/stellaris url'sSpencer Oliver
Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/879 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: lm3s811ek config tested and workingSpencer Oliver
Change-Id: I5402b5521d6e1ef0a569f5cad02c003681f5444b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/847 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect stm32-performance stick configSpencer Oliver
This hardware uses a output enable buffer that was not correctly defined. Fixes issues when using the new ftdi driver. Change-Id: Iba6235a71a6d3c7d16ab729f858b336a4574dfea Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/844 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: stm32-performance stick config tested and workingSpencer Oliver
Change-Id: I9852d11e369e501af240a2b8e9f74306aee4e4a0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/845 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add ti ek-lm3s9d92 configSpencer Oliver
Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/853 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add ti ek-lm3s8962 configSpencer Oliver
Change-Id: I753cec80a904130088b00b3f81b6dd61808662d6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/852 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: str9-comstick tested and workingSpencer Oliver
Change-Id: Ia6c45477381e78cb9508b4731438161e18be1f38 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/843 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: add STM32F3-DISCOVERY board supportSpencer Oliver
Change-Id: I4a02e0504fc04ffc1238d9bb77ec05c1f781e7e8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/810 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: fix incorrect str9-comstick reset configSpencer Oliver
The str9-comstick uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I0968e8459997a6a2b7bf0c46e89662cd57b4f496 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/842 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect stm32f3 TAPIDSpencer Oliver
Change-Id: Id66d4e03a77c47a49086ee753bed01b3944064e1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/855 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26Added SPIFI flash driver, algorithms, and docsGeorge Harris
Added a flash driver designed to allow program/erase of memory-mapped SPI flash chips for LPC43xx/LPC18xx family micros. This driver includes three algorithms - erase, write, and SPIFI peripheral initialization (to allow memory-mapped access after a reset). The driver has been added to the flash driver table (drivers.c), and the OpenOCD documentation has been updated to include the flash driver configuration command. Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514 Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/783 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26drivers: new jtag bitbang driver using sysfs gpioMarc Reilly
This driver implements a bitbang jtag interface using gpio lines exported via sysfs. The aim of this driver implementation is to use system GPIOs but to avoid the need for an additional kernel driver. A config suitable for RaspberryPi is included. Change-Id: Ib2acf720247a219768d1cbfeebd88057ed2d7b8b Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Reviewed-on: http://openocd.zylin.com/762 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Add JTAG-lock-pick Tiny 2 config filesFreddie Chopin
DISTORTEC's JTAG-lock-pick Tiny 2 is a new interface using FT232HL chip and layout similar to KT-LINK. Change-Id: I2831b169cd448ca70397f2dd86c5b749dda3dabf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/787 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-29cfg: update for target's that support cortex_m AIRCR SYSRESETREQSpencer Oliver
If the target supports SYSRESETREQ make sure we use that as the default if srst is not fitted/configured. Change-Id: I24c907493134506320e69c1218702930629c1cdc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/792 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-24ftdi: Olimex ARM-USB-TINY validatedAurelien Jacobs
Flashing a CFI flash and debugging with gdb work fine. Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7 Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/770 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-14cfg: remove duplicate Olimex ARM-USB-OCD configSpencer Oliver
This file is already included as olimex-arm-usb-ocd.cfg. Change-Id: I0e66977c58e74ac93a0dc3a0c88a5e5af4992f8b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/780 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-09cfg: added new openocd-usb highspeed adapterAndrew Karpow
The embedded projects shop released a new highspeed version of the openocd-usb adapter. These configuration files adds support for it. Change-Id: I9b23d7889f998712b9041af101e3f0b9aba85b28 Signed-off-by: Andrew Karpow <notandyk@gmail.com> Reviewed-on: http://openocd.zylin.com/771 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-01added target configs for the lpc17xx devicesVandra Akos
lpc1751, lpc1752, lpc1754, lpc1756, lpc1758, lpc1759 lpc1763, lpc1764, lpc1765, lpc1766, lpc1767, lpc1768, lpc1769 Change-Id: I740b66930cd379c9390f3c1031cdbada747a6ce4 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/676 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-08-01cfg: Add Hitex LPC1768-Stick using ftdi driverJoerg Fischer
Add cfg files for Hitex LPC1768 Stick Website: http://www.hitex.com/?id=1602 This board has a FTDI2232D as JTAG interface, using the same layout as the Hitex STM32-PerformanceStick but with different USB PID. Main MCU is a LPC1768 from NXP. The interface config uses the ftdi driver instead of ft2232. The corresponding ft2232 layout would be "stm32stick". Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7 Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/763 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 4 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/750 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 14:22:52 +0000