aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 3 - files that are currently untested but verified with schematics Change-Id: Ia00c3b6437bffcfa0d178e779926ad9309e289fe Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/755 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 2 - files that are currently untested but assumed to work, as other configs using the same layout work fine Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/754 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 1 - files that were tested an verified as working fine Change-Id: If5986853a1cf118a9eb3b4c13b036d0f71c39624 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/534 Tested-by: jenkins
2012-07-30lpc1768.cfg abstracted and moved to lpc17xx.cfgVandra Akos
- Moved variant-independent code to lpc17xx.cfg, which will be included from lpc17??.cfg files automatically. - lpc1768.cfg filled with variant-dependent code. Change-Id: I7dabe6ed7da7be640ed38c13aaaa096b8796d9a0 Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/675 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-30cfg: remove deprecated stm32 target configsAndreas Fritiofson
These were deprecated in commit 69ac20a. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Change-Id: I047872f8cd61b42aaca6588ab75566219e4a3f5d Reviewed-on: http://openocd.zylin.com/741 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-19board: Add TI AM335x Evaluation ModuleTom Rini
This patch adds the TI AM335x Evaluation Module (ti_am335xevm) board configuration file. Change-Id: Id3529e54972f8acd8c790ad55c8d0f4058a1a1f6 Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/753 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-17Add config file for Lattice LC4032ZE CPLD (ispMACH 4000ZE family)Freddie Chopin
Change-Id: Iefec12b30ff737317c454b472200fd7e7edde619 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/748 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-11flash: add stm32f3x supportSpencer Oliver
add support for the new stm32f3x family from stmicro: http://www.st.com/stm32f3 Change-Id: Icd1db95bb2767d9c0ecef24deefa92b4fdaa4f14 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/735 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-06-26kinetis: update support for all program flash granularitiesChristopher Kilgour
Updates the Kinetis NOR flash support to handle all known block and sector sizes. Previously only 2kiB sectors were hard-coded, now all four known combinations non-volatile sector sizes are supported. The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is also introduced. This means each "block" of flash (in Freescale terms) is treated as a bank in OpenOCD. Correspondingly, the existing board configuration for the TWR-K60M512 eval system is updated to recognize two banks instead of one. A board config for the TWR-K60F120M is also added. Bank and sector erase and programming has been checked with both of the mentioned eval boards. Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/663 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26lpc1768.cfg pulled out constants from flash init as variablesVandra Akos
Seems like an esthetic change, but it will allow easy support for other lpc17xx devices. Change-Id: I2cb953ce1afdd82f6ca65b38d5557a28416f895e Signed-off-by: Vandra Akos <axos88@gmail.com> Reviewed-on: http://openocd.zylin.com/674 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25board: Add Sony Ericsson J100I PhoneMathias K
This patch add the Sony Ericsson J100I Phone to the board configurations. Change-Id: I083ddf067c8ecdfdda0404fe9e9df980dbb86fe8 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/631 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-25config: Add TI Calypso CPU configurationMathias K
This patch add the TI Calypso CPU to the configuration files. Change-Id: Ieb462960391c4a2c630d7a83699c3b6e8162ace9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/630 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-21target: remove legacy target eventsSpencer Oliver
These events have been deprecated for a number of years, update any remaining scripts to the new events. Change-Id: Ic31ff388545ac8b3a500045699ca92c541b13f12 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/634 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com>
2012-05-14jtag: add opendous and estick supportSpencer Oliver
Change-Id: I49c25d226f05fdcaca6cbfc35c2ab47e8464abec Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/611 Tested-by: jenkins
2012-05-14Use hardware reset and connect under reset on boards with ST-LINK/V2, asFreddie Chopin
now it is supported. Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14cfg: add stm320518-eval onboard stlink configSpencer Oliver
Change-Id: Ie92a87ce077c538fdd04af37c798e0a8054b423a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/610 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-08cfg: increase stm32f0discovery board working areaSpencer Oliver
Change-Id: Iea166ee27fc60bbfdeb851fdcf71509f3984f72f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/602 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08cfg: increase stm32f0 default working areaSpencer Oliver
The smallest stm32f0 has 4k sram, so use this as the default. Change-Id: I9097be9608da92b1b9da504e5bacc1280c86907a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/603 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08cfg: Deleted duplicate busblaster.cfg and renamed original.Bill Traynor
The busblaster.cfg was contributed on April 23, 2012 and is a duplicate of dp_busblaster.cfg that was contributed on Oct. 23, 2011. Therefore, deleting the second version. Also, renaming the original dp_busblaster.cfg to simply busblaster.cfg, as this name is more concise. Change-Id: Iccb1f10f53dbbb248b1ff4c6295eaf67c32247c1 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/622 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-05-07cfg: Fixed product link to Flyswatter2Bill Traynor
Fixed the product link to the Flyswatter2 debugger: http://www.tincantools.com/product.php?productid=16153 Change-Id: I7d65e8c94d4521e61b9ae72a5ce14b140b775697 Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/620 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-05-07cfg: add default pid/vid pair to beaglebone board cfg.Bill Traynor
The newer versions of BeagleBone boards use the default vid/pid pair for FT2232 debugging. Please see the following README: http://beagleboard.org/static/beaglebone/latest/README.htm On revision A3/A4 boards, the VID/PID were chosen to match the TI XDS100v2 (0x0403/0xA6D0). On A5 and newer revisions when we've given the authors of CCS the chance to update their software, the generic FTDI VID/PID (0x0403/0x6010) will be used to simplify installation of drivers for systems already having those drivers. Change-Id: I44228eb2029162f23d084eb05bcfef39e615668d Signed-off-by: Bill Traynor <wmat@alphatroop.com> Reviewed-on: http://openocd.zylin.com/619 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-30cfg: fix incorrect stm32vldiscovery working areaSpencer Oliver
The working area used in the config was incorrect, we only have 8K on this board not 16K as the original cfg was declaring. Change-Id: Ie0309fb86d839bd3bc1ac9383905b581fac5c388 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/598 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30cfg: allow stm32discovery parameter overrideSpencer Oliver
This enable the user or board config to override the parameters passed to stm32_stlink.cfg. Required to fix a incorrect working area bug with the stm32vldiscovery. Change-Id: I40a4f7913ff37d577d44b1f23befccf0317080a1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/597 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30cfg: remove unused stlink optionsSpencer Oliver
reset_config is now supported by stlink, remove from the config as this is a per board option. Change-Id: I85208d2154502b8d3a098afe1d9a28d75820a7c0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/582 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-26topic: Added support for the SAM4S variantsOlivier Schonken
Atmel introduced 6 new Cortex-M4 processors on 2011-10-26 SAM4S16C - 1024KB flash LQFP100/BGA100 SAM4S16B - 1024KB flash LQFP64/QFN64 SAM4S16A - 1024KB flash LQFP48/QFN48 SAM4S8C - 512KB flash LQFP100/BGA100 SAM4S8B - 512KB flash LQFP64/QFN64 SAM4S8A - 512KB flash LQFP48/QFN48 The SAM4S processors still suffer from the "6 waitstates needed to program device" errata. Other relevant changes are: 1. Address of flash memory starts at 0x400000. 2. EWP (Erase page and write page) only works for the first two 8KB "sectors" 3. Because of the EWP not working for all the sectors, normal page writes have to be used. The default_flash_blank_check is used to check if lockregions should be erased. 4. The EA (Erase All) command takes 7.3s to complete. (Previous timeout was 500 ms) 5. There are 128 lockable regions of 8KB each. Implemented default blank checking, and page erase for load_image scenarios. This is to compensate for the EWP flash commands only working on the first 2 8KB sectors. Change-Id: I7c5a52b177f7849a107611fd0f635fc416cfb724 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/528 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-23cfg: Add interface config for Dangerous Prototypes Bus BlasterAllen Martin
This is a FT2232 based USB JTAG dongle Change-Id: Ibed773a23b6446df62fe4eac16c27fb2d741f4c3 Signed-off-by: Allen Martin <amartin@nvidia.com> Reviewed-on: http://openocd.zylin.com/589 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-20Split olimex_stm32_h107.cfg.Uwe Hermann
Use one board file per eval board, so that the filename matches the exact board the user has / wants to use. Merging different boards into one file is confusing. Change-Id: I7c50233924a87a913723d7215c4851039c2971bc Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/566 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-18pandaboard: add initial TCL support for pandaboard-esDavid Anders
add initial TCL support for the pandaboard-es which is based on the omap4460 from Texas Instruments. Change-Id: Ic63588721487feb95e7cb3d41cfaab0d2f181766 Signed-off-by: David Anders <danders.dev@gmail.com> Reviewed-on: http://openocd.zylin.com/573 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-18omap4460: add initial TCL support for the omap4460 es1.0David Anders
this patch adds the initial support for the omap4460 es1.0 version which is similar to the omap4430 and used on the pandaboard-es. Change-Id: If885f7d9f8809929bd799786b539e4f499fa3478 Signed-off-by: David Anders <danders.dev@gmail.com> Reviewed-on: http://openocd.zylin.com/572 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-18cfg: add stm32f0discovery board configSpencer Oliver
Change-Id: I4fccdbd4e0a3bc70cd425c910ad1007519098e20 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/570 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-04-13Glyn Tonga2: Faster JTAG speed after CPU/RAM init.Uwe Hermann
Change-Id: Ib08dae0035355138c468483a7ee2d73aadedf430 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/564 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10ft2232: Support for Digilent HS1 USB adapterStephane Bonnet
* Added support to the FT2232 driver for the FT2232H-based Digilent HS1 adapter. Change-Id: Iab6cc15f299badaf115615b5d4d785ecb2273c27 Signed-off-by: Stephane Bonnet <bonnetst@hds.utc.fr> Reviewed-on: http://openocd.zylin.com/558 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10cfg: add icnova_imx53_sodimm board configWjatscheslaw Stoljarski (Slawa)
Add board config for In-Circuit ICnova iMX53 SODIMM Change-Id: I3802ab1695baa75c1f170cf1af0e38ada284c0b8 Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com> Reviewed-on: http://openocd.zylin.com/543 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10cfg: add imx53loco board configWjatscheslaw Stoljarski (Slawa)
Add board config for iMX53QSB (loco) Change-Id: I8659dcd71a56d5fe855eaf62be0a415198b558c5 Signed-off-by: Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com> Reviewed-on: http://openocd.zylin.com/542 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10Support for KaRo TX25 CPU Module on a StarterkitV base boardSimon Widmer
This patch adds support for the KaRo TX25 module on a StarterkitV base board. For board details, check http://www.karo-electronics.com/tx25.html Change-Id: I2c80c5467bc476955b55196728aa3c37c8185e6c Author: Simon Widmer <simonxwidmer@gmail.com> Signed-off-by: Mark Vels <mark.vels@team-embedded.nl> Reviewed-on: http://openocd.zylin.com/557 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-02Initial config for the Voltcraft DSO-3062C.Uwe Hermann
This is a digital oscilloscope which uses a Samsung S3C2440 internally. http://randomprojects.org/wiki/Voltcraft_DSO-3062C Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Change-Id: I5e28c3a8f30665a162e34c831294e4e658a16ebb Reviewed-on: http://openocd.zylin.com/548 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-30cfg: add support for STM3220G-EVAL onboard STLINKSpencer Oliver
Change-Id: Icd7a1baf6f2623e5b57d29c4602a2762af730936 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/541 Tested-by: jenkins
2012-03-30cfg: add STM32F4x and STM3241G-EVAL config filesSpencer Oliver
This adds support for the STM32F4 target and the STM3241G Eval Board, in both standalone and using the onboard STLINK. Change-Id: I62f8908b5880568b2b36c78a78f94c40861ff335 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/540 Tested-by: jenkins
2012-03-30scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delaySpencer Oliver
Change-Id: Idf98526d64dcba4d8a5b6910bd3c539756753e8e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/539 Tested-by: jenkins
2012-03-30Added tcl config scripts for SAM3A/X targets and devboardOlivier Schonken
The SAM3A/X processors that were released thus far is either a SAM3A/X(4) - 256K, or a SAM3A/X(8) - 512K device. Thus the config files are per variant, and not per device. Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Change-Id: I84d26d044e810eb428b1d6287907ea3bf8364c73 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/522 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30Create a init_board procedure for the ea dev board.Chris Morgan
Signed-off-by: Chris Morgan <chmorgan@gmail.com> Change-Id: I082b0d3092c7f3b2ee6b68af64d48c78b31f1dbf Reviewed-on: http://openocd.zylin.com/510 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14cfg: correct pic32mx config typo'sSpencer Oliver
Change-Id: Ibe5b6b0efefc7cfc75d789eb7e9c7ee239526ae2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/508 Tested-by: jenkins
2012-03-13jtag: basic support for P&E Micro OSBDM (aka OSJTAG) adapterJan Dakinevich
This driver provides support for the P&E Micro OSBDM adapter (sometimes named as OSJTAG), mounted on the Freescale TWRK60N512 bord. Thus, it provides a quick start when working with this board. The driver doesn't use BDM commands, but work with OSBDM adapter using only JTAG commands. Change-Id: Ibc3779538e666e07651d3136431e5d44344f3b07 Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-on: http://openocd.zylin.com/492 Tested-by: jenkins Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-11flash: retire unused eCos flash driverØyvind Harboe
even the AT91EB40a's flash is covered by CFI and nobody ever submitted any other drivers based on eCos code. It's just possible that this idea was missing documentation and "marketing", but it's in git if somebody wants to resurrect it. Change-Id: I66449aa6e0997301f9d67f28098789bfc891d6e9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/502 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06Add new configuration files for the Diolan LPC-4350-DB1 developmentJim Norris
board with the NXP LPC4350 processor. Change-Id: I0843e96af9ca05d3e598e2e16eb19fc0581ab46d Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/501 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06config: fix typo in at91 configJaap de Jong
Change-Id: I596cbac3439456fcb02111caee6e8c290c12a6d5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/504 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-02-27cfg: Beaglebone/AM335x refactorNeil Jensen
Split out functions specific to the AM335x SOC into the target directory and simplified the board config file. This should allow one to quickly create new configs for boards based on the TI processor family. Change-Id: I0c3db97950dfa832f1f1918fc10c180f068bba74 Signed-off-by: Neil Jensen <neil30al@gmail.com> Reviewed-on: http://openocd.zylin.com/489 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-27cfg: beaglebone cleanupNeil Jensen
Simplified the configuration and removed things that were not necessary for debugging. Also added reset configuration. Signed-off-by: Neil Jensen <neil30al@gmail.com> Change-Id: I96f991c3051aa68278212cd6509484cbce40ccb7 Reviewed-on: http://openocd.zylin.com/488 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-24cfg: beagleboneNeil Jensen
Moved ti_beaglebone.cfg to the board configuration directory. This was originally placed in the wrong location. Signed-off-by: Neil Jensen <neil30al@gmail.com> Change-Id: I05d10b62b1a21618635ee1773c30d77dc756ec82 Reviewed-on: http://openocd.zylin.com/481 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-23cfg: Beaglebone SupportNeil Jensen
Added support for the Beaglebone board based on the am335x processor family. After much trial and error, I was able to configure the Icepick-D and connect to the processor, halt execution, and run a sample program. This is a unified config file (it doesn't use any include statements) and further work needs to be done to split out the icepick-d configuration to be more generic. Change-Id: Ia1b8e9f01f56bd4f8c575ba3d0160c248583a15e Signed-off-by: Neil Jensen <neil30al@gmail.com> Reviewed-on: http://openocd.zylin.com/471 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 16:18:25 +0000